2. Computers & electronics
  3. Print & Scan
  4. Xerox
  5. 5500 Series

Xerox 5500 Series User manual

  • Hello! I am an AI chatbot trained to assist you with the Xerox 5500 Series User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • Do Xerox 5500 series printers retain latent images during normal operation?
    What happens if a print job is disrupted before completion?
    Do Phaser 5500 series printers retain latent images in the print controller or associated RAM after printing?
    What is stored in the non-volatile flash memory of Phaser 5500 series printers?
    Do Phaser 5500 series printers with optional hard disk drives retain latent images?
    What memory types are found in the Xerox Phaser 4500 and 5500/DX printers?
    Is user data retained in the SDRAM memory?
    What is stored in the EEPROM memory?
    What is stored in the Flash / ROM memory?
    Can user print data be stored in the Hard Disk and Font DIMM?
Xerox Corporation
Office Printing Business
26600 SW Parkway
P.O. Box 1000 M/S 7060-630
Wilsonville, OR 97070
Date: 6/31/2006
Subject: Volatility statement for Phaser 5500 series printers
Phaser 5500 series printers do not retain any latent user image in the mechanical system of the printer during normal
operation. If a print job is disrupted prior to completion a latent image may exist in the mechanical systems of the
printer; the image may be removed by cycling power or printing a page.
Phaser 5500 series printers do not retain any latent image in the print controller (raster image processor) or
associated RAM following the completion of printing. No user data is maintained in the print controller or
associated RAM following the cycling of power.
Phaser 5500 series printers contain non-volatile flash memory contained on the controller. This memory does not
retain any variable printing data, but can be used to retain software updates, store fonts, etc.. No user information is
retained in this memory.
Phaser 5500 series printers equipped with an optional hard disk drives will retain latent images in the hard disk only
when the job retention features are enabled / utilized (Secure print, proof print, or saved print or job accounting).
A procedure for securely erasing any hard disk data is an appendix to this document.
The chart below shows the corresponding memory types for the Xerox Phaser 4500 printer. Please note there are no
remnants of customer print data retained in the printer when the optional Hard Disk Drive and/or Font DIMM is
removed and (ii) the power is turned off.
Xerox Corporation
Office Printing Business
26600 SW Parkway
P.O. Box 1000 M/S 7060-630
Wilsonville, OR 97070
Model Number Memory Type Volatility User Data
5500/B/N/DT SDRAM Volatile Yes
1
EEPROM Non-Volatile No
2
Configuration Card
CRUM
Non-Volatile
Non-Volatile
No
2
No
2
Flash / ROM
Hard Disk (Optional)
Font DIMM (Optional)
Non-Volatile
Non-volatile
Non-volatile
No
3
Yes
4
Yes
4
5500/DX SDRAM Volatile Yes
1
EEPROM Non-Volatile No
2
Configuration Card
CRUM
Non-Volatile
Non-Volatile
No
2
No
2
Flash / ROM
Hard Disk (Standard)
Font DIMM (Optional)
Non-Volatile
Non-Volatile
Non-Volatile
No
3
Yes
4
Yes
4
Notes:
1
SDRAM memory can be upgraded to 512MB for all models
2
Contains printer configuration and operational parameters. It does not contain user print data.
3
Is used for firmware code and contains no user print data.
4
Hard drive and Font DIMM may contain user print data andis an option for all printer models.
/