Pathfinder
Ultra
Silver (6032
) Printer
Pathfinder
Ultra
Gold (6037
) Printer
Loading Supplies in Peel Mode
Put the printer in load mode
and open the cover.
Do Not
wrap the supplies
around this bar.
Peel four inches of labels
Over the Peel Bar
from the backing paper.
Under the Label Deflector
Gently pull the Label
Deflector down.
Close the cover.
Push the Label Deflector up
Pull the backing paper OVER
until it snaps into place.
the Guide Roller, down to the
Pinch and Feed Rollers.
Guide Roller
Press the trigger.
(behind supply)
Closed to the Feed Roller
first position. (behind pinch roller)
Pinch Roller
Cleaning Your Printer
Platen Roller
Pinch and Feed Rollers
Printhead
Use a dry, soft-bristle brush.
Use a dry, lint-free cloth.
Use a cleaning pen or a
soft cloth, lightly moistened
with 99% Isopropyl Alcohol.
Printer Flex Cable
On-Demand Sensor
Scanner Window
Black Mark Sensor
Pull the
Label Deflector
down.
Use a soft cloth, lightly
Use a dry cotton swab.
Use a soft cloth, lightly
Use a dry cotton swab.
moistened with
moistened with water.
99% Isopropyl Alcohol.
1
3
2
8
10
9
6
5
4
7
TC603XWC Rev. AA 3/03
2003 Paxar Americas, Inc. All Rights Reserved.
Pathfinder
Ultra
Silver (6032
) Printer
Pathfinder
Ultra
Gold (6037
) Printer
Loading Supplies in Non-Peel Mode
Close the cover.
Cleaning Your Printer
Platen Roller
Pinch and Feed Rollers
Printhead
Use a dry, soft-bristle brush.
Use a dry, lint-free cloth.
Use a cleaning pen or a
soft cloth, lightly moistened
with 99% Isopropyl Alcohol.
Printer Flex Cable
On-Demand Sensor
Scanner Window
Black Mark Sensor
Pull the
Label Deflector
down.
Use a soft cloth, lightly
Use a dry cotton swab.
Use a soft cloth, lightly
Use a dry cotton swab.
moistened with
moistened with water.
99% Isopropyl Alcohol.
1 2
3
4
9
TC603XWC Rev. AA 3/03
2003 Paxar Americas, Inc. All Rights Reserved.
/