Avery Dennison 6039 Quick Reference Manual

6039
Avery Dennison
Brand
Avery Dennison
Model
6039
Type
Quick Reference Manual

This manual is also suitable for

Loading for Peel Mode Loading for Non-Peel Mode
3. Open the spring-loaded supply holder and place the
supply roll in the supply holder so that the supply
feeds from the bottom.
2. Open the spring-loaded supply holder and place the
supply roll in the supply holder so that the supply
feeds from the bottom.
4. Hold the printer upright and gently press down on
the label deflector. (It may be stiff.)
5. Feed all four inches of the backing paper the
applicator roller, the peel bar
and the label deflector.
under
over
under
6. Push the label deflector up until it snaps
into place.
7. Partially close the cover to the first
position.
8. Pull the backing paper the guide
rollers, down to the pinch and feed rollers.
over
9. Hold the backing paper edge
between the feed and pinch
rollers, and press the trigger.
10. Turn on the printer and put into load mode.
Press Load key.
Select from the printer icon menu,
choose your supply type, and select .
6032:
6039: Load Supply
Calibrate
4. Turn on the printer and put into load mode.
Press Load key.
Select from the printer icon
menu, choose your supply type, and select
.
6032:
6039: Load Supply
Calibrate
11. Close the coversupply completely.
Press ESC key to exit.6032:
5. Close the coversupply completely.
Press ESC key to exit.6032:
Supply Holder
Supply Holder
Pinch Roller
Feed Roller
(behind
pinch roller)
Guide
Roller
(behind
supply)
1. Peel and discard the first four inches of lables from
the backing paper.
See the or
for more information. An 18” X 24” Wall Chart
(TC603XWC) is also available. Contact your
Sales Representative for more information.
Equipment Manual O erator's H ndbookpa
Read This First!
Cover
Latch
Buttons
Cover
Latch
Buttons
TC603XPEELQR Rev. AD 5/09 ©2007 Avery Dennison Corp. All rights reserved.
Label Deflector
Applicator
Roller
Label Deflector
Peel Bar
2. Press the latch buttons and open
the supply cover.
1. Press the latch buttons and open
the supply cover.
3. under
over
Feed the supplies the applicator
roller and the label deflector.
Applicator
Roller
Label Deflector
  • Page 1 1

Avery Dennison 6039 Quick Reference Manual

6039
Avery Dennison
Brand
Avery Dennison
Model
6039
Type
Quick Reference Manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents