GLI Pool Products NE145 is a fence specifically designed to improve safety around above-ground or on-ground swimming pools. It meets the ANSI/NSPI - 1996 Model Barrier Code for such pools. The fence is not intended to be used as a handrail for decking, as it does not meet handrail building codes.
The NE145 comes with mounting brackets, posts, rails, spindles, and trim kits. To install the fence, you will need a cordless or power drill with a Phillips head screwdriver, a saw, a pencil, and a measuring tape. The installation process involves constructing mounting brackets, installing them on the uprights, and attaching the fence posts to the brackets. Then, you will need to install the bottom and top rails and insert the spindles. Finally, you will need to insert all caps and check that the installation is secure.
GLI Pool Products NE145 is a fence specifically designed to improve safety around above-ground or on-ground swimming pools. It meets the ANSI/NSPI - 1996 Model Barrier Code for such pools. The fence is not intended to be used as a handrail for decking, as it does not meet handrail building codes.
The NE145 comes with mounting brackets, posts, rails, spindles, and trim kits. To install the fence, you will need a cordless or power drill with a Phillips head screwdriver, a saw, a pencil, and a measuring tape. The installation process involves constructing mounting brackets, installing them on the uprights, and attaching the fence posts to the brackets. Then, you will need to install the bottom and top rails and insert the spindles. Finally, you will need to insert all caps and check that the installation is secure.
GLI Pool Products NE145 is a fence specifically designed to improve safety around above-ground or on-ground swimming pools. It meets the ANSI/NSPI - 1996 Model Barrier Code for such pools. The fence is not intended to be used as a handrail for decking, as it does not meet handrail building codes.
The NE145 comes with mounting brackets, posts, rails, spindles, and trim kits. To install the fence, you will need a cordless or power drill with a Phillips head screwdriver, a saw, a pencil, and a measuring tape. The installation process involves constructing mounting brackets, installing them on the uprights, and attaching the fence posts to the brackets. Then, you will need to install the bottom and top rails and insert the spindles. Finally, you will need to insert all caps and check that the installation is secure.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI