ESAB Linde WC-2 Water Cooler:
The ESAB Linde WC-2 Water Cooler is a reliable, heavy-duty, recirculating cooling system perfect for the largest water-cooled electric welding and cutting torches. It features a three-phase 3/4 horsepower electric motor that drives a helical pump, delivering 3 gallons per minute at a pressure of 100 pounds per square inch. The heated water from the torch is recirculated through a forced air-cooled convector, and the cooling air is circulated over the convector by a 20-inch fan. The water is then returned to a 15-gallon stainless steel water tank.
ESAB Linde WC-2 Water Cooler:
The ESAB Linde WC-2 Water Cooler is a reliable, heavy-duty, recirculating cooling system perfect for the largest water-cooled electric welding and cutting torches. It features a three-phase 3/4 horsepower electric motor that drives a helical pump, delivering 3 gallons per minute at a pressure of 100 pounds per square inch. The heated water from the torch is recirculated through a forced air-cooled convector, and the cooling air is circulated over the convector by a 20-inch fan. The water is then returned to a 15-gallon stainless steel water tank.
ESAB Linde WC-2 Water Cooler:
The ESAB Linde WC-2 Water Cooler is a reliable, heavy-duty, recirculating cooling system perfect for the largest water-cooled electric welding and cutting torches. It features a three-phase 3/4 horsepower electric motor that drives a helical pump, delivering 3 gallons per minute at a pressure of 100 pounds per square inch. The heated water from the torch is recirculated through a forced air-cooled convector, and the cooling air is circulated over the convector by a 20-inch fan. The water is then returned to a 15-gallon stainless steel water tank.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI