Medion Food Processor MD 41549 User manual

Brand: Medion

Model: Food Processor MD 41549

Category: Food processors

Type: User manual

Medion Food Processor MD 41549 Below you will find brief product information for Medion Food Processor MD 41549. This versatile kitchen appliance is equipped with a range of attachments and features that make it ideal for a variety of food preparation tasks.

With the processing blade, you can stir, knead, or chop various different foods. The dough blade is perfect for stirring cake doughs and kneading bread doughs. The slicing/shredding discs allow you to process different types of vegetables, potatoes, and fruit. And the blender is great for making mix drinks, shakes, and soups.

The MD 41549 is easy to use and clean. The work bowl, lid, and pusher are all dishwasher safe. And the motor block can be wiped clean with a damp cloth.

Food-processor_MD41549_EN-Delta.FH11 Fri May 07 13:51:43 2004 Seite 1

C M Y CM MY CY CMY K

INSTRUCTION MANUAL

08/04

Medion Electronics Ltd.

120 Faraday Park  Faraday Road

Dorcan  Swindon SN3 5JF  Wiltshire

Hot-Line 0870 7270370

++ 44 (0) 1793 715 699 (EIRE)

Fax 01793 715716

E-Mail: [email protected]

www.medion.com

FOOD PROCESSOR

MD 41549

Food-processor_MD41549_EN-Delta.FH11 Fri May 07 13:51:43 2004 Seite 2

C M Y CM MY CY CMY K

- 2 -

Safety instructions Page 3

Supplied accessories Pages 4-5

Installation and connection Page 6

Before first use Page 6

The processing blade Page 6

The dough blade Page 7

The slicing/shredding discs Page 8

The blender Page 9

Application examples Page 10

Cleaning and maintenance Page 11

Specifications Page 11

Table of contents

Food-processor_MD41549_EN-Delta.FH11 Fri May 07 13:51:43 2004 Seite 3

C M Y CM MY CY CMY K

- 3 -

SAFETY INSTRUCTIONS!

GENERAL

Please read these safety instructions carefully before putting the unit into operation.

Always keep these operating instructions near at hand.

When handing over the unit to other persons, these operating instructions must also be handed over

at the same time.

Heed all warnings labelled onto the unit and specified in the operating manual.

Under no circumstances should you allow children unattended use of electrical units.

Always disconnect the mains plug, if you do not intend to use the unit and/or fit or remove

its accessories.

The unit is equipped with safety switches which only allow the unit to be switched on if the work bowl

with lid and the blender or the protective cover have been correctly fitted and snapped into place

(please note the markings).

The processing blade is very sharp. Please use only the grip to hold the blade (risk of injury).

Use the protective cover for storage outside the unit.

Never use the mixer and the work bowl at the same time.

Avoid any contact with moving parts!

Open the mixing bowl or the blender only after the motor has come to a complete standstill.

Use the supplied pusher only to push food for cutting through the filling tube in the lid; never use your

fingers or any other items!

Use this machine for processing food in household quantities only.

NEVER process boiling food!

In order to prevent any risks, use the unit for the specified functions only.

AMBIENT CONDITIONS

Protect the unit against humidity.

Make sure that no foreign bodies or fluids get into the unit.

Do not expose the unit to dripping water or splash water.

Place the unit on a level dry worktop.

Avoid any external heat influence for example due to heaters, gas or electric cookers.

CLEANING AND MAINTENANCE

Never immerse the unit in water or other liquids.

Use only a slightly moistened cloth to clean the housing.

Use warm water only, with trade standard washing-up liquid, for cleaning the accessories.

AC POWER SUPPLY

Connect the mains cable always to a mains socket 230V ~ 50Hz which is easily accessible.

Do not use the unit with an extension cable.

MALFUNCTIONS

In case the power supply cord or the unit is damaged, disconnect the AC mains plug immediately.

If the mains connection line of this unit becomes damaged, then it must be replaced by the manufacturer

or another suitable service in order to avoid risks.

Under no circumstances should you attempt to open and/or repair this unit on your own. Refer all

servicing to our Service Centre in Mülheim or another qualified service shop.

Food-processor_MD41549_EN-Delta.FH11 Fri May 07 13:51:43 2004 Seite 4

C M Y CM MY CY CMY K

- 4 -

Blender

For crushing, puréeing, and mixing

Processing blade for stirring,

kneading, and chopping

Dough blade for

stirring and mixing

Disc holder for slicing/shredding discs

Supplied accessories

Pusher

Measuring jug

Spatula

Lid for

motor aperture

Cover for

processing

blades

Food-processor_MD41549_EN-Delta.FH11 Fri May 07 13:51:43 2004 Seite 5

C M Y CM MY CY CMY K

- 5 -

For fine shredding

For coarse shredding

Slicing and shredding inserts

For grating

For coarse slicing

For thin slicing

The slicing and shredding inserts

are located in the accessories

compartment in the base of the

food processor. Completely pull

out the accessories compartment

by gripping the same underneath

the base, and remove the

required tool from the top or

bottom compartment.

0ff

Food-processor_MD41549_EN-Delta.FH11 Fri May 07 13:51:43 2004 Seite 6

C M Y CM MY CY CMY K

- 6 -

Installation and connection

Place the food processor on a level dry worktop. The location must be close to an easily accessible

household power socket 230V ~ 50Hz.

Before first use

Please rinse the complete accessories incl. work bowl, lid, and pusher in warm water with washing-up

liquid before first use.

Never immerse the motor block in water or other liquids.

Please note that the processing blade as well as the slicing and shredding discs are extremely

sharp (risk of injury).

When in use for the first few minutes a slight odour may develop which disappears again very quickly

and is completely harmless.

This unit is fitted with protection against overheating. If the unit should cut out suddenly whilst in use,

please set the switch to position "0". After approximately 15 minutes the unit has completely cooled

down and is again ready to operate.

The processing blade

Using the processing blade you can stir, knead or chop various different foods.

Caution: The blades are extremely sharp!

Fit the work bowl and snap it into place by turning (note markings).

Then place the processing blade onto the drive axle until it snaps into place audibly.

Now you can fill the work bowl with the ingredients.

When making a dough, it is recommended to fill in first the dry ingredients (flour, sugar, or similar) and

then the other ingredients (eggs, fat, milk, or similar).

Finally, fit the cover with the pusher and snap this into place by turning (note marking).

Set the food processor to the required performance level (note the table on page 10).

If the dough is finished, switch off the food processor (0).

After the motor has come to a complete standstill, remove the cover with the pusher by turning and

lifting off.

Carefully remove the processing blade.

Release the work bowl by turning and use the spatula to fill the dough into another container for further

processing.

Food-processor_MD41549_EN-Delta.FH11 Fri May 07 13:51:43 2004 Seite 7

C M Y CM MY CY CMY K

- 7 -

The dough blade

Using the dough blade, you can stir different cake doughs and knead bread doughs.

Fit the work bowl and snap it into place by turning (note markings).

Then place the dough blade onto the drive axle until it snaps into place audibly.

Now you can fill the work bowl with the ingredients.

When making a dough, it is recommended to fill in first the dry ingredients (flour, sugar, or similar) and

then the other ingredients (eggs, fat, milk, or similar).

Finally, fit the cover with the pusher and snap this into place by turning (note marking).

Set the food processor to the required performance level (note the table on page 10).

If the dough is finished, switch off the food processor (0).

After the motor has come to a complete standstill, remove the cover with the pusher by turning and

lifting off.

Carefully remove the dough blade.

Release the work bowl by turning the same.

Use the spatula to fill the dough into another container for further processing.

Screw the lid onto the motor

aperture until it snaps into

place audibly.

Pusher

Nose

Place lid onto the bowl. Turn in

clockwise direction until the nose

snaps into place audibly in the

guide rail.

The engagement markings must

match!

The engagement

marking must match!

OTHERWISE NO FUNCTION

Guide rail

0ff

Food-processor_MD41549_EN-Delta.FH11 Fri May 07 13:51:43 2004 Seite 8

C M Y CM MY CY CMY K

- 8 -

The slicing/shredding discs

Using the slicing/shredding and grating discs, you can process different types of vegetables,

potatoes, and fruit.

Select the appropriate slicing/shredding disc insert. Please note the different ends of the disc insert -

at the one end a hook, and at the other end a "nose". First, use the hook to engage the disc insert into

the disc. Then press down the end with the "nose" until this snaps in and the disc insert is firmly connected

with the disc.

Fit work bowl and engage by turning (note markings).

Place the previously assembled disc onto the drive axle.

Engage

insert

Press insert into

the disc holder,

until it snaps in

audibly.

Hook

"Nose"

Fit lid with pusher and engage by turning

(note markings).

Set the food processor to the required

performance level (note the table on page 10).

Now push the required ingredients exclusively

with the pusher into the work bowl.

Strongly colouring food (e.g. carrots) may discolour the plastic components.

This colouring is harmless.

Pusher

Screw the lid onto the

motor aperture until it

snaps into place audibly.

Nose

The engagement marking

must match!

OTHERWISE NO FUNCTION

Guide rail

Place disc holder onto

disc holder shaft.

Place lid on bowl. Turn in

clockwise direction until the

nose engages audibly in the

guide rail.

The engagement markings

must match!

0ff

Food-processor_MD41549_EN-Delta.FH11 Fri May 07 13:51:43 2004 Seite 9

C M Y CM MY CY CMY K

- 9 -

Never use your fingers or other objects to push in ingredients!

As soon as you have finished processing or if the maximum fill volume of the mixing bowl has been

reached, switch off the food processor (0).

You may remove the cover with the pusher (turn and lift off lid) only after the motor has come to a

complete standstill.

Then carefully remove the disc.

Now you can release the work bowl by turning and fill the ingredients into another container for further

processing.

The blender

Using the blender, a wide range of mix drinks, shakes, and soups can be prepared quickly.

First, fit the work bowl and snap it into place by turning (note markings).

Fit the cover with the pusher and snap this also into place by turning (note marking).

Remove the protective cover on the motor housing by turning and lift-off.

Now take the blender and screw it down in the motor housing until the markings match

(line and point).

Now place the required ingredients into the blender (but not more than up to the max. fill height).

Now firmly fit the lid of the blender (turn in an anticlockwise direction) and switch the food processor

to the required performance level (please note the table on page 10).

When blending is in progress, you can use the small aperture in the lid to carefully fill in additional

ingredients. Please note that the maximum filling volume is not exceeded.

After the motor has come to a complete standstill, you can remove the blender and fill the contents

into a corresponding container (pot, carafe, or bowl).

Screw blender in a

clockwise direction onto

the motor aperture, until

it engages audibly.

Close lid by

turning in an

anticlockwise

direction.

0ff

Food-processor_MD41549_EN-Delta.FH11 Fri May 07 13:51:43 2004 Seite 10

C M Y CM MY CY CMY K

- 10 -

Recommended Recommended Accessories Operating time

quantity* performance

Dough preparation:

Batter 250 g flour* 4-5 Dough blade approx. 60 s.

Shortcrust pastry 200 g flour* 3 Dough blade approx. 30 s.

Yeast dough 500 g flour* 3 Dough blade approx. 40 s.

Puréeing:

Raw and cooked

3-5 Processing blade

vegetables Blender approx. 30 s.

Blending:

Milk shake 1-3 Blender approx. 30 s.

Chopping:

Meat (raw) 4-5 Processing blade approx. 20 s.

(first cut

into cubes)

Nuts 4-5 Processing blade approx. 40 s.

Slicing,

shredding, grating:

Raw fruit and vegetables 3-5 Slicing,

(e.g. carrots, cucumbers, shredding or approx. 2 min.

onions, potatoes, grating disc

or similar)

Application examples

Hold the switch in this position; as soon

as you release the switch, it returns into

the 0 position.

Off

Minimum speed

Medium speeds

Maximum speed

Switch position

(Impulse operation)

Switch position

2-4

* The details refer to the basic recipes. Please observe the maximum fill height of the work bowl when adding

further ingredients!

PLEASE OBSERVE THE MAXIMUM

FILL HEIGHT (MARKING) OF THE

WORK BOWL!

0ff

Food-processor_MD41549_EN-Delta.FH11 Fri May 07 13:51:43 2004 Seite 11

C M Y CM MY CY CMY K

Cleaning and maintenance

Switch off the unit and disconnect the mains plug. Now remove all accessory parts and use a

moist cloth to clean the housing of the food processor.

Never immerse the unit into the water!

Immediately after use, clean all accessory parts, that have come into contact with food, in warm

water with washing-up liquid.

Specifications

Rated voltage 230 V ~ 50 Hz

Rated power 700 watts

Subject to technical modifications!

- 11 -

Caution! The blades of the processing blade and of the slicing and grating discs

are extremely sharp!

Medion Food Processor MD 41549 User manual

Brand: Medion

Model: Food Processor MD 41549

Category: Food processors

Type: User manual

The MD 41549 is easy to use and clean. The work bowl, lid, and pusher are all dishwasher safe. And the motor block can be wiped clean with a damp cloth.

Download PDF

report

Medion Food Processor MD 41549 User manual

Medion Food Processor MD 41549 User manual

Other documents