Bifinett KH 700 Operating And Safety Instructions Manual

Brand: Bifinett

Model: KH 700

Category: Food processors

Type: Operating And Safety Instructions Manual

700 W

KH700



Operating

and safety instructions

www.kompernass.com

IDNr. KH700-10/03-V2

KH700_Kuechenmaschine_UK 24.11.2003 13:55 Uhr Seite 1

4 3



1Device description ....................................................................................4

2 Purpose ....................................................................................................4

3Technical data............................................................................................4

4Safety instructions ....................................................................................4

5Start-up......................................................................................................5

6Assembling the food processor ................................................................6

7Working with the mixing bowl ..................................................................7

7.1 Working with the cutting blade ..........................................................7

7.2 Working with the cutting and gratings discs......................................8

7.3 Working with the kneading blade ......................................................9

8Working with the blender ..........................................................................9

9Cleaning ..................................................................................................10

10 Malfunctioning ........................................................................................11

11 Warranty, Repair & Customer Service ....................................................11

12 Disposal ..................................................................................................11

13 Table ........................................................................................................12

KH700_Kuechenmaschine_UK 24.11.2003 13:55 Uhr Seite 4

4 5



Universal food processor

Bifinett KH 700

Keep these instructions for questions later on and also hand them over when

passing the device on to third parties!

1. Splash protection cap

2. Blender lid

3. Blender jug max. 1.5l

4. Motor block cover

5. Motor block

6. Speed controller

7. Drive shaft

8. Mixing bowl max. 1.5l

9. Lid for mixing bowl

10. Filling shaft

11. Pusher

12. Measuring cup

13. Retainer

14. Kneading blade

15. Blade

16. Protective case for blade

17. Potato slurry disc

18. Fine slicer

19. Coarse slicer

20. Coarse shredder

21. Fine shredder

22. French fry cutter

23. Disc holder

24. Spatula

1 Device description

2 Purpose

This device is intended for the processing of

foodstuff in household quantities and only for

private use in closed rooms protected from

rain. This device is not intended for commer-

cial or industrial use or for operation in the

open.

3 Technical data

Voltage: ................................................230 V

Power consumption: ......................700 Watt

Capacity blender jug: ............................1,5 l

Capacity mixing bowl: ..........................1,5 l

4 Safety instructions

• Read all instructions.

• Ensure that the power cord never gets

wet or moist during operation. Route the

cable so that it cannot be pinched or oth-

erwise damaged. Do not leave it dangling

from the working surface. Should the

power cord or the power plug be dam-

aged, have them replaced by the Service

before using the device again.

• Pull the plug from the socket when you

do not use the device, before changing

the attachments and before cleaning the

device. Merely switching off is not suffi-

cient since mains power is still connected

to the device for as long as the power

plug is inserted in the socket. In this way

you will also prevent inadvertent switching

on of the device.

• Do not allow children and frail persons to

handle the device without supervision –

since they might not always be able to

properly judge possible dangers.

• Use only the supplied original accessories

since these have been optimised for inter-

action with the device. Other parts might

not be sufficiently safe either.

• Never switch on the device without there

being ingredients in the vessels.

Overheating hazard!

• The cutting edges are very sharp! Exercise

special care when inserting and removing

or cleaning the cutting blade!

• Keep hands and utensils away from mov-

ing blades or discs while processing food

to reduce the risk of severe injury to per-

sons or damage to the food processor.

• Do not attempt to defeat the lid interlock

mechanism.

5 Start-up

• Before starting the device ensure that ...

- the device and all accessories and the

power plug and the power cord are in

perfect condition and ...

- all packaging materials have been

removed from the device.

• Prior to initial use clean all device compo-

nents as described in the “Cleaning”

chapter.

• Assemble the food processor and note

that…

- the mixing bowl works only when the

cover for the motor block, the mixing

bowl and the lid for the mixing bowl

have been properly fitted and engaged.

- the blender works only when the

blender jug and the blender lid have

been correctly fitted and engaged.

- when blender jug, mixer lid, mixing bowl

and the lid of the mixing bowl have

been fitted, only the blender will work.

KH700_Kuechenmaschine_UK 24.11.2003 13:55 Uhr Seite 7

6 7



6 Assembling the

food processor

Fitting the mixing bowl

• Place the cover on the

motor block and turn

anti-clockwise until it is

seated tightly.

• Fit the mixing bowl.

Hold the bowl by the

handle and turn clock-

wise until it engages

with a “click”.

Fitting the lid

Note: Always ensure that the lid is properly

engaged before switching on the

device!

• Fit the lid on the mixing

bowl so that the reces-

ses of the lid match the

slots of the bowl.

• Turn the lid clockwise

until it engages with a

“click”. The marks on

the lid and the bowl

must match. The lug of

the lid now rests on the

handle of the bowl.

Fitting the filling shaft and pusher

Caution: Never use your fingers, spatula,

spoon handles or similar objects

for pushing foodstuff through the

filling shaft!

• You can add liquid and

solid food to the mixing

bowl through the filling

shaft. Use the pusher to

close-up the filling shaft

during operation to

avoid splashing or dust

from escaping (e.g.

when processing flour).

• Use the pusher to force

foodstuff through the fil-

ling shaft.

• The pusher is equipped

with a measuring cup. If

you remove it you can

reduce size of the filling

shaft. This can be useful

when cutting or grating

relative small food.

7 Working with the mixing bowl

The supplied accessories for the mixing bowl

consist of 6 grating and cutting discs, a

kneading blade and a chopping blade for ver-

satile use of the mixing bowl: Grating or cut-

ting, mixing or cutting, kneading or stirring.

7.1 Working with the cutting blade

Caution:

The cutting edges are very sharp! Exercise

special care when inserting and removing or

cleaning the cutting blade!

The bowl must first be properly locked in

position before inserting the cutting blade.

Risk of injury!

Never use your fingers, spatula, spoon han-

dles or similar objects for pushing foodstuff

through the filling shaft!

The cutting blade can be use to mix, chop or

kneading dough. For instance for chopping

meat, cheese, onions, herbs and nuts.

• Remove the cutting

blade from the pro-

tective case.

• Fit the mixing bowl to

the food processor.

• Fit the cutting blade on

the retainer and place

the latter on the drive

shaft.

• Add the ingredients to

the mixing bowl. Fit the

lid to the bowl and

insert the pusher in the

filling shaft. Switch on

the device by setting

the speed controller to the speed recom-

mended in the table. If you are uncertain

which speed should be used, use the fastest

speed (3).

Hints:

• Cut the ingredients in approximately 3 cm

large pieces before placing them in the

bowl.

• The device chops the ingredients very fast

so that you should only run it very briefly at

a time.

• Do not operate the device for longer than

30 seconds.

• Should ingredients be trapped in the bowl

or on the cutting blade:

- Switch off the device

- Remove the lid from the mixing bowl

- Remove the ingredients with a dough

scraper / spatula.

KH700_Kuechenmaschine_UK 24.11.2003 13:55 Uhr Seite 9



7.2 Working with the cutting and

grating discs

Caution: The cutting edges are very sharp!

Be particularly careful when inserting and

removing or cleaning the discs!

Never use your fingers, spatula, spoon han-

dles or similar objects for pushing foodstuff

through the filling shaft!

With the cutting and grating discs you can

quickly slice or grate ingredients. The special

chip disc allows you to quickly prepare

homemade chips. With the potato pancake

disc you can grate raw potatoes for the

dough but also grate other vegetables or fruit

finely.

• Fit the mixing bowl on

the food processor.

S• Select the appropriate

disc. Insert the disc

with the guide edge

(the side without mark-

ing) in the disc holder.

• Push the other side

(marked with two circles

at the corners) down

until the disc engages

with a “click”.

• Fit the retainer to the

drive shaft. Insert thumb

and index finger in the

holes of the disc holder

and place it on the

retainer.

• Place the lid on the

bowl.

• You can now fill ingre-

dients through the filling

shaft.

• For cutting and grating

set the speed controller

to speed 3 (maximum

speed). Should you wish to process soft fruit

or vegetables you can also select a lower

speed. Slowly and gradually push the ingre-

dients in the filling shaft using the pusher.

• To remove the disc from

the disc holder, remove

the disc from the disc

holder by pushing on

the marked side in an

upward direction.

Hints:

• Cut the food into pieces so that they fit

through the filling shaft.

• Fill the filling shaft evenly and do not exert

excessive pressure.

• If you wish to process large quantities of

food do it in small batches and empty the

mixing bowl in-between.

7.3 Working with the kneading

blade

With the kneading blade you can knead

bread dough and mix batter or cake mixture.

• Place the mixing bowl

on the food processor.

• Place the kneading

blade on the retainer

and fit on the drive

shaft.

• Add the ingredients to

the mixing bowl.

• Place the lid on the

bowl and the pusher in

the filling shaft. Set the

speed controller to the

speed recommended in

the Table.

Hints:

• Put liquid ingredients into the bowl last and

start mixing at low speed to avoid splash-

ing.

• Never fill the mixing bowl above the MAX.

mark (1.5l).

• For mixing “water like” liquids only use the

speed 1 with volume less than 1 l to avoid

liquid spilling out.

8 Working with the blender

Caution

• Never switch on the blender when empty.

• Never insert the plug in the socket before

the blender jug and the blender lid have

been correctly assembled.

• Always pull the plug from the socket

before removing the blender jug.

• Do not fill ingredients hotter than 80°C in

the blender jug.

• To avoid splashing, never add more than

1.5l of liquid in the blender jug.

• Never remove the blender lid during oper-

ation.

• First remove the blender lid before remov-

ing the blender jug.

• Never run the blender continuously for

more than 3 minutes.

You can use the blender to finely puree and

mix ingredients. You can use the blender for

preparing soups, sauces, milkshakes, baby

food or process vegetables and fruit into a

puree.

• First remove the cover

for the motor block by

turning it clockwise.

KH700_Kuechenmaschine_UK 24.11.2003 13:55 Uhr Seite 11

1110



• Place the blender jug in

the opening and turn it

anti-clockwise until

seated tightly.

• Place the lid on the

blender jug and turn it

anti-clockwise until sea-

ted tightly.

• Fill the ingredients in the

blender jug. Cut them

into smaller pieces

beforehand if required.

• If required, insert the

splash protection cap

and turn it anti-clockwi-

se to secure.

• Switch on the blender

by setting the speed

controller to the desired

speed.

• When you have finis-

hed, switch off the

blender and first remove

the lid by turning it

clockwise.

• Then remove the blen-

der jug by turning it

clockwise.

Hints:

• You can add your ingredients to the blender

jug through the opening in the lid during

operation. To do so, simply remove the

splash protection cap.

• If you process hot liquids, remove the

splash protection cap to allow the steam to

escape.

• Should ingredients be trapped in the

blender jug during operation, proceed as

follows:

- Switch off the device (speed controller

to speed 0) and pull the plug from the

socket

- Remove the splash protection cap and

the lid

- Remove the trapped ingredients in the

blender jug using the dough scraper.

- Ensure you do not damage the scraper

with the blade!

9 Cleaning

Caution

• On no account must the device be

immersed in water or other liquids! This

can cause electric shock when remaining

liquid comes in contact with live compo-

nents during subsequent operation.

• Exercise special care when cleaning the

blades, the blender jug with installed

blade and the cutting discs. The blades

and cutting edges are extremely sharp!

• Pull the plug from the socket before every

cleaning.

• Wipe the housing with a clean, moist cloth

after each use.

• You can clean the mixing bowl and the lid

in hot soapy water.

• None of the device components are suit-

able for use in a dishwashing machine!

Neither should you use abrasive cleaning

agents for cleaning device components.

• Clean all device components that have

come in contact with foodstuff with deter-

gent and hot water after use.

10 Malfunctioning

• Should the food processor suddenly stop:

- This means that the device has over-

heated and the integrated safety cut off

has switched off the food processor.

- Pull the plug from the socket

- Set the speed controller to speed 0

- Allow the device to cool down for 15

minutes

- If the device has not cooled off com-

pletely after 15 minutes, it will not start.

Wait another 15 minutes before switch-

ing it on again.

11 Warranty, Repair & Customer

Service

This device has a 3-yearswarranty from the

date of purchase as per our standard busi-

ness conditions and proper use and mainte-

nance.

To prolong the lifespan of your food proces-

sor, follow the directions given under

„Cleaning & Maintenance“.

In case your food processor fails to function

as expected, it must be given for repairs to a

service centre authorised by the manufacturer

or a qualified technician. For this purpose,

please contact our customer service. The

address is given in the enclosed warranty

certificate.

12 Disposal

This device must not be disposed with

household waste, because it contains materi-

als that have to be disposed separately.

Consult your city or community administrative

authorities about procedures for the environ-

ment friendly and systematic disposal of the

food processor.

KH700_Kuechenmaschine_UK 24.11.2003 13:55 Uhr Seite 13

1312



13 Table

The following table serves as orientation help

to determine the quantities and speeds for

various ingredients.

Do not exceed the specified operating period

to avoid overheating of the device.

In addition to the 3 speeds, a short powerful

spurt of operation is available with the pulse

stage “P”. The switch does not engage in

pulse position. Hold the switch in this posi-

tion or repeatedly turn it to pulse position.

Ingredients Max. Speed stage Accessories Operating

quantity period

Bread 700 gr. Flour 3 Kneading blade 60 seconds

dough (ratio flour:

water =100:60)

Apples/ 500 gr. 3 Cutting/Grating

carrots attachments

Potatoes 500 gr. 3 Chip attachment

Meat / 500 gr. 3 / P Cutting blade 30 seconds

fish

Vegetables 500 gr. 2 Cutting blade 30 seconds

Fruit 500 gr. 2 Cutting blade 15 seconds

KH700_Kuechenmaschine_UK 24.11.2003 13:55 Uhr Seite 15

Bifinett KH 700 Operating And Safety Instructions Manual

Brand: Bifinett

Model: KH 700

Category: Food processors

Type: Operating And Safety Instructions Manual

Download PDF

report

Bifinett KH 700 Operating And Safety Instructions Manual

Bifinett KH 700 Operating And Safety Instructions Manual

Related papers

Other documents