14 1-800-732-0144
WWW.SITMEANSSIT.COM 15
MATCH THE COLLAR RECEIVER AND REMOTE TRANSMITTER
To match the Collar Receiver to work with a new Remote Transmitter or to match a new Collar
ReceivertoworkwithyourexistingRemoteTransmitter:
A.TurntheCollarReceiveroff.
B.PressandholdtheOn/OffButton.TheReceiverIndicatorLightwillcomeon,thenturnoffafter4-5
seconds.IftheOn/OffButtonisreleasedtooearly,theReceiverIndicatorLightwillbeginashingas
normal.Ifthisoccurs,startoverfromA.
C.AftertheReceiverIndicatorLighthasturnedoff,releasetheOn/OffButton.
D.Press and hold the Upper Button on the Remote Transmitter until the Receiver Indicator Light
ashes5times.OncetheReceiverIndicatorLighthasashed5times,theCollarReceiverhasbeen
matchedandwillbeginashingasnormal.IftheReceiverIndicatorLightdoesnotash5times,
startoverfromA.
PROGRAM THE SYSTEM FOR TWO OR THREE-DOG OPERATION
SportDOG
™
Add-A-Dog
®
CollarReceiver(s)mustbepurchasedtotrainadditionaldogs.
Compatible Add-A-Dog Collar Receivers for this system include: SDR-AF, SDR-AS, SDR-AC, SDR-A,
SDR-AW, SDR-AH, and SDR-AB.
1.ProgramtheRemoteTransmittertomode2,3,or4(seepage13).
2.ProgramtherstCollarReceiver.
A. TurntheCollarReceiveroff.
B. PressandholdtheOn/OffButton.TheReceiverIndicatorLightwillcomeon,thenturnoff
after4-5seconds.IftheOn/OffButtonisreleasedtooearly,theReceiverIndicatorLightwill
beginitsnormalashing.Ifthisoccurs,startoverfromA.
C. AftertheReceiverIndicatorLighthasturnedoff,releasetheOn/OffButton.
D. PressandholdtheUpper ButtonontheRemoteTransmitteruntiltheReceiverIndicatorLight
ashes5times.IftheReceiverIndicatorLightdoesnotash5times,startoverfromA.
3.Program the second Collar Receiver using A through D above, but using the Lower Button in
placeoftheUpperButton.
4.ProgramthethirdCollarReceiverusingAthroughDabove,butusingtheSide Buttoninplaceof
theUpperButton.
CHANGE ID CODES
AnIDCodeisthesignalidenticationbetweentheRemoteTransmitterandCollarReceiver.Eachis
programmedin1of2,000IDCodesfromthefactory.TheSD-825SMShastheexibilitytoprogramtwo
ormoreRemoteTransmitterstothesameIDCode,allowingthemtocontroloneCollarReceiver.There
are64programmableIDCodesavailable.
TO MANUALLY PROGRAM A REMOTE TRANSMITTER’S ID CODE FOLLOW THESE STEPS:
1.TurntheIntensityDial toV/T,andthen pressandrelease theModeButtonon thebackof your
RemoteTransmitter.Thisdoesnotchangethemode,sothecurrentmodewillstillbeactive
aftertheIDchangeiscomplete.
2. OncetheModeButtonisreleased,theTransmitterIndicatorLightwillilluminatesolidgreenand
stayonfor15seconds.
3. WhilethegreenIndicatorLightison,turntheIntensityDialtoselectthe1stdigitoftheIDandthen
pressandreleasetheSideButton.ThegreenIndicatorLightwillashrapidlyconrmingselection.
STEP
::
06STEP
::
07STEP
::
08
4.Again,whilethegreenIndicatorLightison,turntheIntensityDialtoselectthe2nddigitoftheIDandthen
pressandreleasetheSideButton.ThegreenIndicatorLightwillashrapidlyconrmingselection.The
2nddigitisoptionaland,ifnotdesired,waituntilthegreenlightturnsoffandrefrainfrompressing
theSideButton.
5.Attheendof15seconds,orafterthesecondpressoftheSideButton,thegreenIndicatorLightwillturnoff
andtheIDoftheunitwillbeupdated.Atthispoint,theunitwillbeinthesamemodeitwasinprior
tosettingtheID.
6.UponchangingtheIDCode,youwillneedtomatchtheCollarReceivertotheRemoteTransmitter
(seeSTEP6onpage14).
TO RETURN THE UNIT TO THE FACTORY ID FOLLOW THESE STEPS:
1.TurntheIntensityDialtoV/T,andthenpressandreleasetheModeButtononthebackofyour
RemoteTransmitter.Thisdoesnotchangethemode,sothecurrentmodewillstillbeactiveafter
theIDchangeiscomplete.
2. DonotpressanybuttonsandwaituntilthegreenTransmitterIndicatorLightturnsoff.
3. YouwillneedtomatchtheCollarReceivertotheRemoteTransmitter(seeSTEP6onpage14).