Amethyst A1-BT User manual
- Category
- Bluetooth music receivers
- Type
- User manual
RmETHYST
A1-BT
Please read this guide carefully before use
PROPERTY RIGHTS INFORMATION:
The trademark amethyst"lanchiya"and all the developed products with this label
are registered patents, and belong to Foshan LANCHIYA digitai Technology Co. , Ltd.
Our company reservesall rights, and not allow reprinting.Other concerned
trademarks all belong to their proprietors. As to the constant update and
development of the products, our company reserves the right to change and
rework our products without notice.
SAFETY INSTRUCTIONS:
To ensure your safety and enjoyment, read and fOllow the safety
instructions and use in the directed manner. Keep this manual for
future reference.
WARING: To prevent any fire or electrical hazards, do not remove
or dissemble any parts from this unit. Please ensure that you use a
qualified technician to service it,
• Do not expose the unit to rain, water or moisture
• Do not place liquid on or close to unit
• Do not place unit on or near an open fire such as candles or light
• Keep away from heat and dust
• Place unit on a stable and level platform
• Do not place any items on top of unit
• Do not use excessive force when pushing the unit buttons
• Do not attempt to pull the power cord from a distance to shut the power
• Secure all cords and connections and do not use pinched or defective one
• Unplug the power cord if the unit is left unused for extended periods
• Clean with a damp cloth only
• Operating temperature 0°C-55°C (32°F-131°F)
• Blue tooth device can't be found: probably, the Speaker has been connected by
other Blue tooth device. Press Pair button to search it again. If you still cannot
find the speaker, please Turn Off the speaker for 5second then turn it on.
• Blue tooth signal intermittently: the effective distance between speaker and
Device is SM, the signal will be intermittent if the distqnce more than SM.
• Cannot reconnect after leave effective range: if the Blue tooth device leave the
effective for 20 seconds, the speaker will enter been searched mode, the voice
mentioned "Device is wait for connect", you need to connect the Speaker again
with you Blue tooth device.
• Hear PuPu sound: Many of third party music media player didn't support
• If there are more than 1 Speaker are switch on, the Bluetooth device will find
more than 1 speaker, if you want to connect one of them please turn off the others
• If your Bluetooth device on searching and find many other Bluetooth device,
please wait for the searching finished and select Speaker to pair.
r
®
\
l'
1.A1~BT machine
2.Power adapter
3.Audio cable
4.User manual
1. PAIR
2. Left tweeter
3. LED indicator light
4. Bass
5. Right tweeter
6. INPUT
7. External Aux input
8. DC OUT(DC 5V 500mAOUT)
9. Power switch
1O.DCpower input
BriM Operation tntroductlon
1.Push the power button to OFF position, connect the power adapter to
power source, push the power button to ON position.And the Voice Prompt
"power ON"
2.The power indicator will be on, default is bluetooth channel. and the unit is
searching the paired device before.lffinding the device paired before, the
unit will connect it automatically. The unit can play music from the connected
device.lf not, Please follow the next step
!
C
..'
.J
3.Connect Bluetooth Device:Touch Pair Button and the Voice Prompt
Pairing Searching the unit via mobile and other bluetooth devices,
the identification code is A 1-BT,. Paired successfullyand Voice prompt
"Pair completed", music can be played.
Bluetooth
Cell Phone
search fOf new devIce
~Al'BT
A1-BT
Y
!-----
4.Re-pairing: Touch the pairing button (on top of the left ear) for 3 seconds,
the indicator is from flashing to unflashing. There is voice prompt "Pairing"
and ready to be paired, the unit cuts off the current pairing and is ready
to be re-paired.
PAIR
Remarks:
If
the unit cannot be searched after power on, it maybe try pairing
the paired device or be paired by another device. At this situation you can
follow step 3 to pair it.
5.External Audio Play: Press the channel switching button (on top of the right
ear) for 1 second. the indicator is flashing. connect the unit to external audio
source for playing. Repeat this process to switch back to bluetooth channel
play.
INPUT
J
6.DC 5V Charge: This unit provide standard USB jack, maximum 5V 500mA
electric current to charge cell phone.
search for new
device
A1·8T
7.Switch off: If you don't use A 1-BT for a long time, pis switch off, and pullout
the AC plug from the AC power outlet.
(~
....
'1
1
'll:., /
\
-
(
).
. - - -
--'-'
Y/ . /
ACAdaptor
SPECIFICATIONS
Product Name: Bluetooth Speaker
MODEL: A1-BT
Frequency response: 65Hz-20KHz
Amplifier output power: 1.5Wx2, subwoofer 3.5Wx1
Amplifier input sensitivity: ,;:;400mV
Amplifier SNR: ;;.75dB
Amplifier distortion: ,;:;1%
Power voltage: AC1 00-240V,50/60Hz
Blue tooth transmission distance:8-1 OMwhitout obstacle
Blue tooth working frequency:2.4GHz
Blue tooth version:V3.0+EDR
Blue tooth audio playback format:A2DP stereo
Rm
Manufacturer:Foshan LANCHIYADigital TechnologyCo., Ltd China
Address: hongtuRD,SongxiaIndustryPark,SonggangNanhaiDistrict,Foshan,
Guangdong Province,China
MADEINCHINA
AIBT-G01-1
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
Amethyst A1-BT User manual
- Category
- Bluetooth music receivers
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
