American Standard 2709.028WC.K2 User manual

Brand: American Standard

Model: 2709.028WC.K2

Category: Sanitary ware

Type: User manual

This manual is also suitable for

H49

ELLISSE OVAL™

WHIRLPOOL AND BATHING POOL

HIGH GLOSS

Rev. 2/08

ELLISSE OVAL™ WHIRLPOOL AND

BATHING POOL

❏ 2709.028WC Whirlpool featuring System II

• Acrylic with berglass reinforcement

• Pre-leveled tub bottom

• Factory installed power cord and plug

• Six multi-directional and ow-adjustable body

massage jets

• Pre-Drilled for grab bars (purchased separately)

• Two silent air volume controls

• Quick Connect Safe-T-Heater

connection system

• Factory installed and tested whirlpool system

• 2.1 HP, two speed self-draining pump/motor

with dry run seal and Pulse feature

• Deck-mounted electronic On/Off with 20 minute

built-in timed safety shut off and chrome bezel

• EverClean

System

❏ 2709.028WC.K2 Whirlpool Massage

with Chromatherapy

Same as 2709.018WC but also includes:

• Two digitally controlled lights

• Electronic control with color selector and

color cycle function

❏ 2709.002 Bathing Pool only

Nominal Dimensions:

1759 x 978 x 502mm

(69-1/4" x 38-1/2" x 19-3/4")

Compliance Certications -

Meets or Exceeds the Following Specications:

• Underwriters Laboratories - Hydromassage

Bathtubs UL 1795

• ASME A112.19.7M for Whirlpool Appliances

• ANSI Z124.1 for Plastic Bathtubs

• ASTM E162 for Flammability

• NFPA 258 for Smoke Density

American Standard whirlpools and air baths with

EverClean

incorporate a patented silver-ion

additive right into the circulation piping to protect

the pipes from mold, mildew, algae and fungus that

could cause deterioration or staining of the pipes.

SEE REVERSE FOR PRODUCT DIMENSIONS

AND SPECIFICATIONS

To Be Specied - Required:

❏ Color:

❏ Bath Filler: (specify nish)

❏ Bath Drain: 1583.470 (specify nish)

❏ Grab Bar Kit: 9827-200-two per kit (specify nish)

To Be Specied - Optional:

❏ Safe-T-Heater*: 9075.120

❏ Jet Trim Ring Kit: 9860.200-two per kit (specify color)

❏ System II Control Bezel: 9861.100 (specify nish)

❏ Air Blower Remote Mounting Kit: 754025-0071A

For color/nish availability and other faucet choices, please

see the Product Selector and Pricing Guide.

* NOTE: the Safe-T-Heater is designed to maintain water

temperature during operation. It will not heat cold water to

desired bathing temperature.

H50

ELLISSE OVAL™

WHIRLPOOL AND BATHING POOL

HIGH GLOSS

1759 mm

(69-1/4)

ROUGH

FLOOR

1-1/2 O.D.

TAILPIECE

OUTLINE OF

CUTOUT

240 mm

(9-7/16)

978 mm

(38-1/2)

464mm

(18-1/4)

INTEGRAL

FEET

SUPPORT

86mm

(3-3/8)

38mm

(1-1/2)

489mm

(19-1/4)

76mm

(3)

OF DRAIN

OUTLET

502mm

(19-3/4 )

1-1/2 N.P.T.M.

THREADS

35mm

(1-3/8)

305mm(12) X 229mm(9)

CUTOUT IN FLOOR FOR DRAIN

98mm

(3-7/8)

PROVIDE ACCESS

TO PUMP FOR

SERVICING ON ALL

INSTALLATIONS

ON/OFF

SWITCH

PUMP

SEE FTTG.SPECS

FOR DIMENSION

OF SUPPLIES

C/L OF

SPOUT

C/L OF

VALVES

C/L OF

SHOWER ARM

1651-1981mm

(65-78)

OPTIONAL

102mm

(4)

305mm

(12)

SAFE-T-HEATER

REMOVABLE BLANK

1759 mm

(69-1/4)

ROUGH

FLOOR

1-1/2 O.D.

TAILPIECE

OUTLINE OF

CUTOUT

240 mm

(9-7/16)

978 mm

(38-1/2)

464mm

(18-1/4)

INTEGRAL

FEET

SUPPORT

95mm

(3-3/4)

38mm

(1-1/2)

489mm

(19-1/4)

76mm

(3)

OF DRAIN

OUTLET

502mm

(19-3/4 )

1-1/2 N.P.T.M.

THREADS

35mm

(1-3/8)

305mm(12) X 229?mm(9)

CUTOUT IN FLOOR FOR DRAIN

98mm

(3-7/8)

SEE FTTG.SPECS

FOR DIMENSION

OF SUPPLIES

C/L OF

SPOUT

C/L OF

VALVES

C/L OF

SHOWER ARM

1651-1981mm

(65-78)

OPTIONAL

102mm

(4)

305mm

(12)

GENERAL SPECIFICATIONS FOR 2709 WHIRLPOOL

69-1/4 x 38-1/2 x 19-3/4 In.(1759 x 978 x 502mm)

107 Lbs. (49 Kg.)

640 Lbs. (291 Kg.)

64 Gal. (243 L)

53 Gal. (201 L)

45 x 23 In. (1143 x 584mm)

63 x 32 In. (1600 x 813mm)

13 In. (330mm)

35 Lbs./Sq.Ft. (166 Kgs./Sq.m)

25.6

49.4

WHIRLPOOL ELECTRICAL SPECIFICATIONS

2.1 HP, 15.6 AMPS, 120V.SYSTEM II PUMP

INSTALLED SIZE

WEIGHT

WEIGHT w/WATER

GAL. TO OVERFLOW

WHIRLPOOL MIN. OPERATING VOL.

BATHING WELL AT SUMP

BATHING WELL AT RIM

WATER DEPTH TO OVERFLOW

FLOOR LOADING

(PROJECTED AREA)

PTS.

CUBE (FT

)

GENERAL SPECIFICATIONS FOR 2709 BATHING POOL

69-1/4 x 38-1/2 x 19-3/4 In.

(1759 x 978 x 502mm)

77 Lbs. (35 Kg.)

611 Lbs. (275 Kg.)

64 Gal. (243 L)

45 X 23 In. (1143 x 584mm)

63 x 32 In. (1600 x 813mm)

13 In. (330mm)

34 Lbs./Sq.Ft. (165 Kgs./Sq.m)

25.6

49.4

INSTALLED SIZE

WEIGHT

WEIGHT w/WATER

GAL. TO OVERFLOW

BATHING WELL AT SUMP

BATHING WELL AT RIM

WATER DEPTH TO OVERFLOW

FLOOR LOADING

(PROJECTED AREA)

PTS.

CUBE (FT

)

NOTES:

BATH CAN BE INSTALLED EITHER ABOVE OR BELOW FLOOR LINE AS PIER, ISLAND OR PENINSULA TYPE INSTALLATION. SUPPORT

OF BATH BY INTEGRAL FEET. NO ADDITIONAL SUPPORT IS REQUIRED. SUPPORT AND ENCLOSING MATERIAL BY OTHERS.

REFER TO INSTALLATION INSTRUCTIONS SUPPLIED WITH WHIRLPOOL FOR ADDITIONAL INFORMATION.

▲ CUTOUT TEMPLATE PROVIDED IN SHIPPING BOX. MAY BE REQUESTED SEPARATELY.

FITTINGS NOT INCLUDED AND MUST BE ORDERED SEPARATELY.

PROVIDE SUITABLE REINFORCEMENT FOR ALL SUPPORTS.

ON SYSTEM II: CONTROL MODULE TO BE MOUNTED BEHIND ACCESS PANEL, A MINIMUM OF 152mm (6) ABOVE ROUGH FLOOR.

IMPORTANT: Dimensions of xtures are nominal and may vary within the range of tolerances established by ANSI Standard Z124.1 / CSA

Certied. These measurements are subject to change or cancellation. No responsibility is assumed for use of superseded or voided leaet.

Rev. 2/08

American Standard 2709.028WC.K2 User manual

Brand: American Standard

Model: 2709.028WC.K2

Category: Sanitary ware

Type: User manual

This manual is also suitable for

Download PDF

report

American Standard 2709.028WC.K2 User manual

This manual is also suitable for

American Standard 2709.028WC.K2 User manual

Related papers