2. Behringer
  3. Model D
Model D

Behringer Model D Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Behringer Model D Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
page
1
of
4
musictri.be
behringer.com
Model D Firmware Update Instructions
Version 1.0.6 - (11 May 2018)
Note: The model D updater V1.0.6 supports Windows 7 and onwards.
1. Download the Model D Firmware Updater V1.0.6 here: http://www.musictri.be/Categories/
Behringer/Keyboards/Synthesizers-and-Samplers/MODEL-D/p/P0CQJ/downloads
2. Connect USB cable from your Model D to computer by using one of its on-board USB ports.
Avoid using any USB hubs.
3. Connect the power supply and switch on the power for the Model D. You may notice that
Windows highlights that a “New Device” has been connected and will install this device to your
operating system - Please wait for this process to complete before proceeding. Once installed
Windows will confirm this.
page
2
of
4
musictri.be
behringer.com
4. Open up the Model D Firmware Updater previously downloaded. It should connect to the
Model D and display the device current firmware.
*If you see “Model D not detected” or if “Device Firmware Version” is blank you may need to
update some system files to continue. Please install the Windows “.NET Compact Framework 2.0
Redistributable” (https://www.microsoft.com/en-gb/download/confirmation.aspx?id=22808).
If this doesn’t solve the issue please contact our CARE team.
page
3
of
4
musictri.be
behringer.com
5. To begin the firmware update, click “START UPDATE”
*This may take some time to complete so please be patient whilst the update completes.*
page
4
of
4
musictri.be
behringer.com
6. When the Updater tool completes you will see that the update bar will be a “solid” green and a
notification “Update Successful. Close Model D Updater and restart the device!” as the instruction
mentions please restart the Model D.
7. To check that the update has completed, close the Model D Firmware Updater and re-open it.
You will now see that the update completed and displays “Device Firmware Version: 1.0.6”
© MUSIC Tribe Global Brands Ltd. All rights reserved.
All information in this document is subject to change without any further notice.
/