musictri.be behringer.com
page 1 of 4
Model D Firmware Update Instructions
Version 1.0.5 - (13 March 2018)
Note: The model D updater V1.0.5 supports Windows 7 and onwards.
1. Download the Model D Firmware Updater V1.0.5 here: http://w ww.musictri.be/Categories/
Behringer/Keyboards/Synthesizers- and-Samplers/MODEL-D/p/P0CQJ/downloads
2. Connect USB cable from your Model D to computer by using one of its on-board USB ports.
Avoid using any USB hubs.
3. Connect the power supply and switch on the power for the Model D. You may notice that
Windows highlights that a “New Device” has been connected and will install this device to your
operating system - Please wait for this process to complete before proceeding. Once installed
Windows will conrm this.