JBL T88 is a high-quality loudspeaker that utilizes a 12mm polycarbonate dome transducer for high frequencies and an 8" polymer laminate transducer for low frequencies. It has a frequency response of 60 Hz to 20 kHz and a sensitivity of 90 dB. The nominal impedance is 8 ohms, and the recommended amplifier power is between 10 and 80 watts per channel.
The JBL T88 is easy to set up and use. The grille can be removed by grasping it by both top and bottom edges and pulling gently. To replace the grille, reposition it carefully and press gently at the corners. The loudspeaker cabinet may be cleaned with a slightly damp cloth. To remove dust from the grille cloth, use a vacuum with a brush attachment. Spots may be removed with a commercial spot remover.
JBL T88 is a high-quality loudspeaker that utilizes a 12mm polycarbonate dome transducer for high frequencies and an 8" polymer laminate transducer for low frequencies. It has a frequency response of 60 Hz to 20 kHz and a sensitivity of 90 dB. The nominal impedance is 8 ohms, and the recommended amplifier power is between 10 and 80 watts per channel.
The JBL T88 is easy to set up and use. The grille can be removed by grasping it by both top and bottom edges and pulling gently. To replace the grille, reposition it carefully and press gently at the corners. The loudspeaker cabinet may be cleaned with a slightly damp cloth. To remove dust from the grille cloth, use a vacuum with a brush attachment. Spots may be removed with a commercial spot remover.
-
1
-
2
JBL T88 is a high-quality loudspeaker that utilizes a 12mm polycarbonate dome transducer for high frequencies and an 8" polymer laminate transducer for low frequencies. It has a frequency response of 60 Hz to 20 kHz and a sensitivity of 90 dB. The nominal impedance is 8 ohms, and the recommended amplifier power is between 10 and 80 watts per channel.
The JBL T88 is easy to set up and use. The grille can be removed by grasping it by both top and bottom edges and pulling gently. To replace the grille, reposition it carefully and press gently at the corners. The loudspeaker cabinet may be cleaned with a slightly damp cloth. To remove dust from the grille cloth, use a vacuum with a brush attachment. Spots may be removed with a commercial spot remover.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
