Barska Reassemble Locknut Owner's manual

855 Towne Center Drive | Pomona, CA 91767

(t) 888.666.6769 | (f) 909.445.8169 | www.barska.com

7/16

BC477

Reassemble Locknut For Metal Detector

C D E

Parts

A. Top Stem with Handle

B. Bottom Stem with Coil

C. Washer with Thread

D. Washer with

Small Head

E. Locknut

* Actual Model May vary

1. Place the washer with thread (C) on top stem (A) where it shall lock

2. Place the locknut (E) downwards on bottom stem (B).

3. Put the washer with small head (D) downwards on bottom stem (B).

4. Hitch top stem (A) with bottom stem (B).

5. Push locknut (E) upwards to washer with thread and turn

locknut in the direction of the arrow until the locknut lock in place.