2. Exibel
  3. WRE6505

Exibel WRE6505 User manual

  • Hello! I am an AI chatbot trained to assist you with the Exibel WRE6505 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
GREAT BRITAIN - CUSTOMER SERVICE contact number: 020 8247 9300 e-mail: customerservice@clasohlson.co.uk internet: www.clasohlson.co.uk
English
1
2
3
4
WPS
Flashing
Ver. 20150113
WiFi Repeater
Art.no 38-6814 Model WRE6505
Please read theentire instruction manual before using theproduct and
then save it for future reference. We reserve theright for any errors in
text or images and any necessary changes made to technical data.
In theevent of technical problems or other queries, please contact our
Customer Services.
Note: Therepeater can either be used as arange extender or anaccess
point. This quick guide only describes therepeater function. If you wish to
use therepeater as anaccess point, read themanual on theincluded CD
or visit themanufacturer’s homepage (www.zyxel.com) for information.
Buttons and functions
WPS connection
Connect the repeater to your router/access point
6. Open you web browser. Go to: http://zyxelsetup/
7. Write admin in the“Username” field and 1234 in the“Password” field.
8. Open thelist of available networks in thedevice which you wish to
connect to therepeater.
9. Select your network and enter theSSID and password.
Follow theon-screen instructions to complete theconnection.
Connecting to the new network which the repeater
has created
1. LAN port for connecting anetwork cable
2. [
] WPS button (WiFi Protected Setup)
3. [ AP/REPEATER ] Access point / Repeater selector switch
4. [ l/0 ] On/off switch
1. Set the [ l/0 ] switch (4) on
theunderside of therepeater to ON.
2. Connect therepeater to
anelectrical socket.
3. Wait about 1 minute until thegreen
LED indicator on thefront of
therepeater comes on.
4. Activate theWPS function on your
router or access point.
5. Hold in theWPS button (2) on
thereceiver for 2 seconds.
6. Wait about 2 minutes until
theWPS indicators on thedevices
have stopped flashing (thedevices
are connected).
Connecting a wireless device
to the repeater
1. Press theWPS button (2) on
thereceiver twice in quick
succession.
2. Activate theWPS function on
your device.
3. Thedevice will now be connected
to therepeater.
1. Therepeater creates
anew network which
uses theoriginal
network name
plus thesuffix
“ _2.4GEXT” or
“ _5GEXT”
2. Open thelist of
available networks
in thedevice that
you wish to connect
therepeater to.
3. Connect to thenew network using thesame password that you
used for theoriginal network.
Care and maintenance
• Use adry cloth to wipe therepeater clean when needed.
• Therepeater should be unplugged from thewall socket if it is not
to be used for along time.
• If you need to reset therepeater to its default factory settings,
hold in theWPS button (2) for 5–10 seconds until theLED
indicator starts to flash.
Disposal
This product should be disposed of in accordance with local regulations.
If you are unsure how to proceed, contact your local council.
Specifications
Power supply 100–240 V, 50/60 Hz
Transfer rate 750 Mbit/s
Dual band 2.4/5 GHz
LAN port
WPS support
IP address 192.168.1.2
WPS
WPS
Flashing
Non-WPS connection
1. Set the [ l/0 ] switch (4) on
theunderside of therepeater to ON.
2. Connect therepeater to
anelectrical socket.
3. Wait about 1 minute until thegreen
LED indicator on thefront of
therepeater comes on.
4. Note theSSID and password of
your wireless network.
5. Connect your computer to one
of thepre-configured router
networks: SSID: Zyxe_2.4GEXT or
SSID: Zyxe_5GEXT.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/