]nsta]]atian Instructions
Vc_t l/ood
BEADANDSAVET SEIINS U DONS
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
Read all instructions before installing the hood.
For your safety, please read and observe all safety instructions. Thb guide will help
you antbipate all installation connections.
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
For toll-free telephone support in the U.S. and Canada:
1-877- 4ELEOTROLUX (1-877-435-3287)
For online support and lnternet product information:
www.eleet roluxusa.eom
@2005 EIectrolux Home Products, Inc.
Post Office Box 212378, Augusta, Georgia 30917, USA
All rights reserved. Printed in the USA
TABLE OF'CONTENT9
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
Finding Information ...........................................2
PleaseReadAndSaveThisGuide...................2
Questions..........................................................2
TableOfContents..............................................3
Safety ...................................................................4
ImportantSafetyInstructions..............................4
Preparing for installation ..................................7
VerifyingPackageContents...............................7
InstallationPlanning...........................................7
SpecificationsandDimensions...........................8
Exhaust Duct Locations....................................9
DuctLocations...................................................9
Duct Preparation................................................11
Cabinet Preparation .........................................13
PreparingtheCabinets....................................13
Electrical PowerSupply ...................................14
Requirements..................................................14
Installation ........................................................15
InstallingtheHood...........................................15
MakingtheEledricalConnection.....................16
Operation ...........................................................17
VerifyingtheOperation....................................17
IIM £NT S£FEW IINS U ONS
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
Safety Precautions
Do not attempt to install or operate your unit until you have read the safety
precautions in this manual. Safety items throughout this manual are labeled with a
Warning or Caution based on the risk type.
,5!:,,This is the safety alert symbol. It is used to alert you to potential personal injury
hazards. Obey all safety messages that follow this symbol to avoid possible injury
or death.
SAFETYPRECAUTIONS
VEB F'¥PACKAGECONTENTS
[] [] [] [] [] [] [] [] [] [] [] [] []
Use and Care Manual
,, Suction Cup
[] [] [] [] [] [] [] []
IIN
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
A qualified installer must complete the installation of this builtqn appliance. Proper
installation is your responsibility.
Carefully check the location where the hood is to be installed. The hood should be
placed for convenient access. Make certain that electrical power can be provided in
the selected location.
Plan the installation so that all minimum clearances are met or exceeded.
Dimensions shown provide minimum clearances, unless otherwise noted.
The specified minimum cabinet depth and width must be provided.
Cabinet cutout dimensions must be used as indicated. All contact surfaces
between the appliance and the cabinet must be solid and level.
Make certain that you have everything necessary to ensure a proper
installation before proceeding.
Overall Dimensions
Isometric View
(9" hood shown)
Figure 1
9" HoodOverall Dimensions
Model Width "A" Width "B"
E30WV60EPS 297/8" (759mm) 2313/16" (605ram)
E36WV60EPS 357/8" (911mm) 2313116"(605ram)
E48WV12EPS 477/8"(1216ram) 2313/16" (605ram)
Overall Dimensions
Isometric View
(18" hood shown)
Figure 2
Model Width "B"
E308WV60ES 2613/16" (681ram)
E368WV60ES 2613/16" (681ram)
E488WV126S 2613/16" (681ram)
18" HoodOverall Dimensions
Width "A"
297/8" (759mm)
357/8" (911mm)
477/6"(1216mm)
Verticam Exhaust Duct Location
E3OWV6OEPS, E36WV60EPS, E308WV6OES,
E368WV60ES
Top View
Figure 3
6 1/8"
(156mm)
t
8" (203ram)
Round Duct
Collars
Vertical Exhaust Duct Location
E48WV12EPS
Top View
Figure 5
Horizontal Exhaust Duct Location
E488WV120S
Rear View
Figure 7
Horizontal Exhaust Duct Location
E308WV60ES, E368WV60ES
Rear View
Figure 6
f \
\
/ \ \
\
\\ \\
\ \
\ \
\
\
5304449697
Custom Transition
for use with
E488WV120S
(not included)
Figure 8
EL,,EC CAL,CONDUT IIIL,,,,,,,OCAT ONS
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
1 1/2" 1/2"
7/8"_ (11Pqm) Holes (_8 _!_)m_rl
Conduit Location
E3OWV6OEPS, E36WV60EPS, E48WV12EPS,
E3OSWV6OES, E368WV60ES, E488WVI20S
Top View
9" and 18" Hoods
Figure 9
Conduit Location
E308WV6OES, E368WV60ES, E488WV120S
ReadBack View
18" Hoods
Figure 10
Electrical Conduit Locations
Model No. Dimension "A" Conduit Location
E3OWV6OEPS 9" (752mm)
E308WV6OES
E36WV60EPS 8" (203ram}
E368WV60ES
E48WV12EPS 147/16"(367mm}
E488WV120S
Refer to the table beUow for recommended maximum straight Rengths of duct to
provide adequate performance.
Model Duct Maximum Equivalent Straight Lengths
Size
10" 50'
31/4"x10" 50'
E3OWV6OEPS
E36WV60EPS
E48WV12EPS
E3OSWV6OES
E368WV60ES
E488WV120S
E3OWV6OEPS
E36WV60EPS
E3OSWV6OES
E368WV60ES
60'
Refer to the table beUow for recommended sheet metaU eUbows, transitions, and
wall cap equivaUent straight Rengths.
Recommended sheet metal elbows, transition, and wall cap equivalent straight lengths
3 1/4" x 10" 900 Elbow
15 Feet
Transistion
3 1/4" x 10" to Round
8" Diameter - 4 Feet
10" Diameter - 4 Feet
3 1/4" x 10" 45 Elbow
7 Feet
3 1/4" x 10" Wall Cap
2 Feet
45 ° Elbow - Round Duct
8" Diameter - 3 Feet
10" Diameter - 2 Feet
90 o Transistion
3 1/4" x 10" to 8" Round
25 Feet
3 1/4" x 10"
90 ° Flat Elbow
20 Feet
90° Elbow - Round Duct
8" Diameter - 7 Feet
10" Diameter - 5 Feet
IP PABINGTHEC£B N
[] [] [] [] [] [] [] [] [] [] [] [] m [] [] [] [] [] m [] m
Minimum hood clearances are zero inches (0") to the rear, sides and top of the
hood.
Thirty inches (30") is the minimum distance between the bottom of the hood and
any cooking surface.
Maximum effective cUearance from cooking surface to bottom of hood is 36"
(914mm).
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
It is the owner's responsibility to ensure that the electrical connection of this
appliance is performed by a qualified electrician. The electrical installation including
minimum supply wire size and grounding, must be in accordance with the latest
revision of the National Electric code ANSI/NFPA and local codes and ordinances.
A copy of this standard may be obtained from:
National Fire Protection Association
1 Batterymarch Park
Quincy, Massachusetts 02269-9101
The correct 120VAC, 60Hz, 15A circuit must be supplied for this appliance from a
separate, grounded, circuit that is protected by a properly sized circuit breaker or
time delay fuse.
IINIWAI,,,,,,,,,,I,,,,,,,,,,INGTIE HOOD
[] [] m m m m [] [] [] [] m m m [] [] [] [] m m m m []
First temporarily mount a 2x4 ledger board 30" (762mm) from the finished
countertop. Then, remove the filters from the hood canopy and remove the shields
below the power ventilator. Secure the hood through the keyhole slots in the top of
the hood and/or the slot hole in the rear of the hood. Remove the temporary ..... .......: .......
support ledger.
Top
mounlnc Rear
(both sides) holes
Temporary
supportledger
Temporacy Support Ledgec Instalation
(g" Shown)
Figure 11
Top
mountin(
(both sides)
Figure 12
MAKINGTHEELEC C£L CONNECTION
[] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] [] []
Figure 13
Electrical power source wiring can be
connected through the top or back of the
hood. Access the wiring inside the hood
canopy in the area to the right side of the
power ventilator.
Connect the pre=wJred 12" long black, white
and green wires to the corresponding
black, white and ground (green) wire from
the power source wiring. Use wire nut
connectors to secure the connections.
VE :'¥1NGTHEOPERATION
[] [] [] m m m [] [] [] [] m m m [] [] [] [] m m m m []
@
@
@
o
install the fiRers.
Verify that the hood control knobs are in the OFF position.
Turn on the main power supply.
The hood has two knobs that control the function of the hoods Halogen
lights and the exhaust blower. Turning the knobs clockwise will turn on
the lights and the blower. The blower has a variable speed range between
settings.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
Electrolux E368WV60ES Installation guide
- Type
- Installation guide
- This manual is also suitable for
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Dacor EHD3009 Installation Instructions Manual
-
KitchenAid 6899551 User manual
-
KitchenAid 6899552 User manual
-
Zephyr CPA-E54ASX User manual
-
-
-
Whirlpool MH6141XKB2 Installation guide
-
Wolf CTWH30 Operating instructions
-
Empava EMPV36RH04 User manual
-