Jawbone Jawbone Quick start guide

Jawbone
Brand
Jawbone
Model
Jawbone
Type
Quick start guide

This manual is also suitable for

Jawbone Jawbone is a Bluetooth headset with advanced features that enhance your calling experience. With its NoiseAssassin technology, it effectively suppresses background noise, ensuring crystal-clear conversations even in noisy environments. The device automatically enters pairing mode when turned on for the first time, making it easy to connect to your phone. It also supports voice dialing, allowing you to initiate calls hands-free. Additionally, you can adjust the volume and turn NoiseAssassin on or off during a call using dedicated buttons on the headset.

Jawbone Jawbone is a Bluetooth headset with advanced features that enhance your calling experience. With its NoiseAssassin technology, it effectively suppresses background noise, ensuring crystal-clear conversations even in noisy environments. The device automatically enters pairing mode when turned on for the first time, making it easy to connect to your phone. It also supports voice dialing, allowing you to initiate calls hands-free. Additionally, you can adjust the volume and turn NoiseAssassin on or off during a call using dedicated buttons on the headset.

Quick Start Guide
1 Power Up
•PLUGINJAWBONEFOR50MINUTES
(
YES, THERE’S AN AC ADAPTER IN THE BOX
)
2 Pair
 • PHONEBLUETOOTH®SETTING:ON
 • JAWBONEAUTOMATICALLYGOESINTOPAIRINGMODEFIRSTTIMEON
 • ALLOTHERTIMES:HOLD JAWBONE TALK AND NOISEASSASSIN™ BUTTONS: 2SECONDS
 • INDICATORLIGHTFLASHESRED+WHITE
 • PHONE:‘SEARCHFORNEWDEVICES’
 • SELECTJAWBONE,ENTERPASSCODE‘0000’
3 Share
•MAKETHATCALL
(
GO CHANGE THE WORLD, WE KNOW YOU CAN
)
JawboneOverview
a NoiseAssassin Button
b Talk Button
n o t e Both Talk Button
and NoiseAssassin
Button are hidden
beneath the external
face of the headset. To
activate either button,
simply press on the
areas indicated above.
1 Charging
• YoucanchargeyourJawboneheadsetvia
thewallcharger,orviaUSBonyourcomputer.
• PlacetheJawboneheadsetinthesocket
withthejawbonelogofacingupward.
• Chargethebatteryfullyonfirstuse.
• Chargetime50minutes.
• 80%chargeafter35minutes.
• IndicatorlightisRED
whileheadsetischarging/WHITEwhenheadset
isfullycharged.
• IndicatorlightflashesREDwhenbatteryislow.
(continuetopage2)
c Voice Activity Sensor
d Earbud
e Earloop
The medium sized earloop and
earbud are already fitted to
yourJawboneatthefactory.
• Tot u r n o f f t h e l e d ,presstheTalkButton5
timeswhileinstandbymode.
• To
a n s w e r a n i n c o m i n g c a l l w h i l e o n a c a l l ,
press the Talk Button.
• To
c h a n g e t h e v o l u m e duringacall,pressthe
NoiseAssassinButtontocyclethroughthe
multiple volume levels.
• To
t u r n n o i s e a s s a s s i n o f f orbackonduringacall,
presstheNoiseAssassinButtonfor2seconds.
n o t e NoiseAssassinisalwayso n by default.
• TurntheJawboneheadset
o n or o f f by
pressingtheTalkButtonfor2seconds.
• To
a n s w e r a c a l l ,presstheTalkButton.•
• Tor e j e c t a c a l l , press the NoiseAssassin
Buttonwhilephoneisringing.
4 Talk
• Jawbone’spatentedNoiseAssassinrequires
contactwithyourface.MakesuretheVoice
ActivitySensor(VAS)istouchingyourface.
If the VAS doesn’t touch your cheek, the headset
willnotworkproperly.
• Jawbonecomeswith4earloopsand3earbuds
for maximum comfort.
• TowearJawbone,tuckearloopbehindyourear,
placeearbudsnuglyinsideyourear,andrest
VoiceActivitySensoronyourcheekasshownin
thediagram.
3 Fit
t o m a n u a l l y p u t y o u r h e a d s e t in pa i r i n g m o d e
• HolddowntheTalkButtonandNoiseAssassin
Buttonfor2secondsuntiltheindicatorlight
flashes RED + WHITE. (Headset must be
poweredofftoinitiate).
• Pairingmodelastsfor3minutes,oruntil
successfulpairing.
• YourJawboneheadsetautomaticallygoesinto
pairingmodethefirsttimeyouturniton.
• Inpairingmode,theindicatorlightflashes
RED + WHITE
t o p a i r f o r t h e f i r s t t i m e
• Turnonyourphone’sBluetoothsetting
• PresstheTalkButtonfor2seconds
• ‘SearchforNewDevices’
• SelectJawbone
• Enterpasscode‘0000’
2 Pairing
5 More
• Toi n i t i a t e v o i c e d i a l i n g , press the NoiseAssassin
Buttonfor2secondsinstandbymodeandthen
speak a command.
• To
r e d i a l l a s t n u m b e r called, triple-tap the
NoiseAssassin Button.
Foradditionalinformationvisitjawbone.com/support
©2008AliphCom.AllRightsReserved.
  • Page 1 1
  • Page 2 2

Jawbone Jawbone Quick start guide

Jawbone
Brand
Jawbone
Model
Jawbone
Type
Quick start guide
This manual is also suitable for

Jawbone Jawbone is a Bluetooth headset with advanced features that enhance your calling experience. With its NoiseAssassin technology, it effectively suppresses background noise, ensuring crystal-clear conversations even in noisy environments. The device automatically enters pairing mode when turned on for the first time, making it easy to connect to your phone. It also supports voice dialing, allowing you to initiate calls hands-free. Additionally, you can adjust the volume and turn NoiseAssassin on or off during a call using dedicated buttons on the headset.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents