ESAB Circle Cutting Attachment on "Linde" CM-56 Shape Cutting Machine is an accessory that enables users to cut circles and arcs without templates on the CM-56 Shape Cutting Machine.

This attachment features a 20-inch radius rod, allowing users to cut circles with a maximum diameter of 40 inches. Larger circles require longer radius rods, available separately from ESAB.

The Circle Cutting Attachment is particularly useful when cutting circles of various diameters, as it eliminates the need for templates. The attachment can cut both inside and outside circles, as well as trim flanges.

To set up the attachment, users must first adjust the tracer head height. The attachment features a thimble finger that pushes against a fence, guiding the radius rod along a circular path.