118118
SCREENS FOR PROFESSIONALS
PRO-LIFT
PRO-LIFT PIVOT
• The Pro-Lift Pivot has a tilting feature with a fixed pivot point to
help insure proper projector alignment
• Pre-wired duplex female receptacle and duplex plate with an
internally mounted control switch for installer friendly operation.
• Optional choice in infrared (IR) or radio frequency (RF) remote
operation.
• The pivot unit features a built-in low voltage control.
• The trim flange at the bottom ensures ensures that ceiling
mounting is inconspicuous.
• The Pro-Lift Pivot has a load capacity of 11 kg.
PRO-LIFT
• The Pro-Lift has a heavy duty steel construction using rack
and pinion or screw drives instead of chain mechanisms.
• The Pro-Lift 25 moves 25 cm from the ceiling down.
The Pro-Lift 38 moves 38 cm from the ceiling down.
• The Pro-Lift has a load capacity of 18 kg.
PROJECTOR LIFTS
Projecta introduces two types of concealed motorized projector lifts,
the Pro-Lift and the Pro-Lift Pivot. Engineered to meet the most
demanding installations.
• The Pro-Lift is a vertically raised lift and the Pro-Lift Pivot is a
pivoting lift.
• The Projecta projector lifts are complete with a universal projector
mount.
• The lifts are constructed of heavy duty materials and are powder
coated.
• Both universal lifts can be mounted in either a suspended or a
drywall ceiling.
Internally mounted
control switch
Heavy Duty steel
construction
Tilting feature with
a fixed pivot point