2. Spectrum Industries
  3. 97505B

Spectrum Industries 97505B Assembly Instructions

  • Hello! I've reviewed the Assembly Instructions for the Spectrum Rack Mount Pull Out Shelf 97505. This document includes a parts list and step-by-step instructions on how to assemble the shelf to rack rails. I'm ready to answer your questions about this product and its assembly.
  • What size screws are used to attach the shelf?
    Where is the shelf designed to mount?
    What is the purpose of the adhesive mat?
Assembly Instructions:
PARTS LIST
(6) 10-32 x 5/8” Truss Head
Machine Screws #050184
1600 Johnson St. P.O. Box 400 Chippewa Falls, WI 54729 Ph. 1-800-235-1262 Fax. 1-800-335-0473
email [email protected] www.spectrumfurniture.com #059991Q
1 of 1
RACK RAILS
SHELF
10-32 X 5/8” THMS
Before you begin, please make sure all parts and proper
quantities are included. Any parts damaged during shipment
must be reported within 15 days of receipt. To report informa-
tion regarding damages or if you have any questions, please
call 1-800-235-1262.
Figure 1
RACK MOUNT PULL OUT SHELF #97505
1
A. Using the 10-32 x 5/8” THMS, attach the Rack Mount Pull Out Shelf
to the Rack Rails. See Figure 1.
B. Do not attach to rear Rack Rail if equipped. Shelf is designed to
mount on pull-out side only.
C. An adhesive mat is provided, this can be adhered to the shelf
to provide a non-slip surface.
CONNECT PULL OUT SHELF TO RACK RAILS
(1) Non-Slip Adhesive Mat
#059987
/