Kmart 43262014 User manual

Brand: Kmart

Model: 43262014

Type: User manual

Instruction Manual

INTRODUCTION MANUAL

4. Once the plasters are completely dry, you can decorate them with paint.

You may refer to the examples on the packaging or create your own design.

Green = yellow + blue

Orange = yellow + red

Purple = blue + red

Cyan = blue + white + little yellow

Pink = red + white

Sky blue = white + blue

Lemon yellow = yellow + little blue

Brown = yellow + red + little black

1. Mix the plaster

powder

2. Fill the moulds

3. Wait for plaster to set

4. Painting the plasters

5. Use of magnetic

strip

User care instructions: Avoid leaving the magnets on metallic surfaces for long periods of time as they may result

in dirt build-up and rust formation.

Ensure the metallic surfaces are always kept clean and free from humidity, take special care below water & ice

dispensers.

Never drag the magnets on the metallic surfaces to avoid damaging the finish.

2. Place the mould tray into water,

then remove and shake off any

excess water Place tray on a flat

surface. Pour the mixed plaster

into the moulds (do not overfill),

and gently shake the mould tray to

eliminate the air in the mould.

Once the plaster has become solid,

take a scraper and gently scrape the

surface of the plasters.

3. Wait about 1 hour for the plaster to

be completely set. Lay a soft cloth on

the table, gently beat the surface, and

carefully remove the plasters from the

mould.

5. Cut (scissors not included) the magnetic strip into several sections, and

stick on the back of the plasters.

1. Take out a bowl and a mixing

spoon, and prepare a cup of clear

water. Cut open the pack of plaster

powder and place the powder and

water in the bowl. Mix together until

combined.

Kmart 43262014 User manual

Kmart 43262014 User manual

Kmart 43262014 User manual

Other documents