Govee H6119 User manual

Type
User manual

Govee H6119 RGBIC Car LED Strip Lights enhance your driving experience with customizable lighting. Controlled via the Govee Home app or RF remote, choose from a variety of colors and dynamic effects. Music mode syncs the lights to your music's rhythm, creating a truly immersive atmosphere. Installation is a breeze with the included adhesive and screws, and the lights are powered by your car's cigarette lighter. Enjoy a vibrant and personalized driving experience with Govee H6119.

Govee H6119 RGBIC Car LED Strip Lights enhance your driving experience with customizable lighting. Controlled via the Govee Home app or RF remote, choose from a variety of colors and dynamic effects. Music mode syncs the lights to your music's rhythm, creating a truly immersive atmosphere. Installation is a breeze with the included adhesive and screws, and the lights are powered by your car's cigarette lighter. Enjoy a vibrant and personalized driving experience with Govee H6119.

,...
·~ovee
User Manual
Model: H6119
RGBIC
Car
LED
Strip
Lights
At
a Glance
LED
Strip Lights
Control Box
Car Cigarette Lighter
RF
remote
User Manual
Specifications
Length
Lighting
Color
Power
Supply
Voltage
Control
Method
Working Temperature
4
1
1
1
1
4 x 30cm / 4 x 0.98ft
RGBIC
Car Cigarette Lighter
12VDC
Govee
Home
App,RF Remote
-10°C -45°C (14°F-113°F)
01
Installing Your Strip Lights
0 Preparation Before Installing
a.
Unpack the box and check all items listed in the packing list.
b.
Power on the strip lights and check
whether
they light up.
8 Installing Steps
a. Wipe the installing surface
to
make sure it's clean and
smooth.
b.
Install the cigarette lighter and control box in the central
console.
c.
Peel
off
the protective
film
and stick the strip lights
as
indicated in the picture.
--
~
Screw Fixing Hole
~-Steering
wheel / Cigarette lighter
--~
Front
Seat
02
Back
seat
d.
Firmly press the strip
from
end to end and reinforce
ends
of
the strip
with
zip ties and screws.
e. Insert the cigarette lighter into the socket and press
the
button on it. The button will light on, indicating the strip
light
is
powered on.
Controll~ng with the Control
Box
..._
@
_.._-
On/Off
@
...J--
Color button
Music Mode/Brightness Adjusting
Button
Function
On/Off Short press to turn
on/off
the strip light.
Color button Short press
to
switch the color.
Music
Mode/ Short press
to
switch
to
music mode;
Brightness
Adjusting
Long press to adjust the brightness
03
Controlling by
RF
remote
control
Button
A
B
C
D
0
0 0
0 0 0
C)
0
0 0
0 0 0
Function
Short press: Turn. ON/OFF
strip
light
Short press: Adjust brightness
Short press: Switch color cyclically
Short press: Switch
to
music
mode
Downloading
the
Govee
Home
App
Download
the
Govee
Home
app
from
App Store
(iOS
devices)
or
Google Play (Android devices).
04
GET
IT
ON
~•
(~t)t)3lc
pl(_1y
Connecting
the
Strip
Lights
to the
App
0 Turn on Bluetooth in
your
mobile phone.
8 Open
Govee
Home app and tap "+" icon in the top right corner.
0 Select "H6119" in the device list.
Troubleshooting
0 The
LED
strip doesn't
turn
on
a.
Please make sure the cigarette lighter
is
power on.
b.
Please make sure the cigarette lighter
is
well connected
with
power
plug.
c.
There
is
a
button
on the cigarette lighter. Please make
sure
it
is
pressed, and the
LED
strip will
be
energized
if
button
is
red.
05
8 The
LED
strip stops working after using
for
a period
a.
Please
make sure the cigarette lighter
is
well connected
with power plug.
b.
Please open the
APP
to
make sure the strip light
is
switched on.
c.
Open the cover
of
the cigarette lighter and take
out
the
fuse to check whether it's burned.
e The adhesive
is
not
sticky
a.
Please
clean and
dry
the surface
of
the object where the
strip needs
to
be
installed.
b.
Please
put
the
LED
strip on the clean surface, and press
it
firmly
for
15 seconds
to
make sure
it
is
sticky.
c.
Moreover, please screw the
LED
strip
to
prevent
it
falling
off.
8 Cannot connect
to
APP
a.
Please
turn
on the Bluetooth
of
your
cellphone.
b.
Please make sure
it
is
connected
to
the Bluetooth
according
to
the
APP
instructions.
c.
If
the phone
is
not
compatible, please replace the phone
and reconnect
the
LED
strip.
d.
Please unplug the adapter
for
nearly 1 0minutes and
replug
it
in
to
retry.
e.
Please
make sure the device
is
in the Bluetooth range
of
your cellphone.
06
f.
Please make sure there is
no
obstacles between product
and
your
cellphone.
e The control box doesn't
work
a.
Please
unplug the cigarette lighter and then plug
it
back.
b.
Please
control
the
strip light through app and check
if
you can adjust color and brightness.
07
FCC
Statement
This device complies
with
Part 15
of
the
FCC
Rules .
Operation
is
subject
to
the
following
two
conditions:
(1) This device
may
not
cause
harmful
interference,
and
(2) This device
must
accept
any
interference received,
including interference
that
may cause undesired
operation.
Warning: Changes
or
modifications
not
expressly
approved
by
the
partyresponsible
for
compliance could
void
the
user's
authority
to
operate
the
equipment.
NOTE:
This
equipment
has been tested and
found
to
comply
with
the
limits
for
a Class B digital device,
pursuant
to
Part 15
of
the
FCC
Rules.
These limits are designed
to
provide
reasonable
protection
against
harmful
interference in a residential installation.
This
equipment
generates uses and can radiate radio
frequency energy and,
if
not
installed and used in
accordance
with
the
instructions,
may
cause
harmful
interference
to
radio
commu
.nications. However,
there
is
no
guarantee
that
interference will
not
occur in a
particular
installation.
If
this
equipment
does cause
harmful
interference
to
radio
or
television reception, which can be
determined
by
turning
the
equipment
off
and on,
the
user
is encouraged
to
try
to
correct
the
interference
by
one
or
more
of
the
following
measures:
1.
Reorient
or
relocate the receiving antenna.
2.
Increase
the
separation between the equipment and
receiver.
3.
Connect the equipment into an outlet on a circuit
different
from
that
to
which the receiver is connected.
4.
Consult
the
dealer
or
an experienced
radio/lV
technician
for
help.
FCC
Radiation Exposure
Statement
This equipment complies
with
FCC
radiation exposure
limits set
forth
for
an uncontrolled environment. This
equipment should be installed and operated
with
minimum
distance 20cm between the radiator & your body
Responsible
party
:
Name:
GOVEE
MOMENTS(US)
TRADING
LIMITED
Address: 13013
WESTERN
AVE
STE
5
BLUE
ISLAND
IL
60406-2448
Contact information: https://www.govee.com/support
The Bluetooth® word mark and logos are registered
trademarks owned by Bluetooth
SIG,
Inc. and any use
of
such marks by Shenzhen lntellirocks Tech. Co.,Ltd.
is
under
license.
Govee
is
a trademark
of
Shenzhen lntellirocks Tech
Co.,
Ltd.
Copyright ©2021 Shenzhen lntellirocks Tech
Co.,
Ltd. All
Rights Reserved.
Customer Service
Warranty: 12-Month Limited Warranty
Support: Lifetime Technical Support
:.!;:
Official Website: www.govee.com
0 @Govee
CD
@Govee O @Govee
@Goveeofficial
@~
Govee
Home
App
For
FAQs
and more information,
please visit: www.govee.com
LET'S CONNECT
Inspire &
Be
Inspired
-Share
your
creations on social media.
-Connect with
our
active Govee Community.
-Discover new ideas
for
using your products.
0 0 \
NEED HELP?
Contact us anytime!
O Report an issue
on
the
app
~
Rapid Replacement
on
the app
-·
·--------
~
GETITON
p•
Google Play
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16

Govee H6119 User manual

Type
User manual

Govee H6119 RGBIC Car LED Strip Lights enhance your driving experience with customizable lighting. Controlled via the Govee Home app or RF remote, choose from a variety of colors and dynamic effects. Music mode syncs the lights to your music's rhythm, creating a truly immersive atmosphere. Installation is a breeze with the included adhesive and screws, and the lights are powered by your car's cigarette lighter. Enjoy a vibrant and personalized driving experience with Govee H6119.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI