Impress 98583455M User manual

Brand: Impress

Model: 98583455M

Type: User manual

This manual is also suitable for

98580477M

Impress 98583455M is a 12” oscillating table fan that can be used to provide ventilation or cooling in indoor environments. Here is some brief product information:

It has 2-speed settings, low and high, which can be selected by pressing the corresponding button on the base of the fan.
The oscillation knob allows you to choose between stationary or oscillating operation.
The fan is equipped with a polarized plug for safety, which fits into a polarized outlet in only one way. If the plug does not fit into the outlet, reverse the plug and try again.
The fan has a fuse for overload protection. If the fuse blows, unplug the product from the outlet and replace the fuse following the instructions in the manual.

Impress 98583455M is a 12” oscillating table fan that can be used to provide ventilation or cooling in indoor environments. Here is some brief product information:

It has 2-speed settings, low and high, which can be selected by pressing the corresponding button on the base of the fan.
The oscillation knob allows you to choose between stationary or oscillating operation.
The fan is equipped with a polarized plug for safety, which fits into a polarized outlet in only one way. If the plug does not fit into the outlet, reverse the plug and try again.
The fan has a fuse for overload protection. If the fuse blows, unplug the product from the outlet and replace the fuse following the instructions in the manual.

READ AND SAVE THIS USE AND CARE BOOK

CONSERVER CE GUIDE D’ENTRETIEN ET D’UTILISATION

POR FAVOR LEA ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO

MODEL NO. IM-712W

12” OSCILLATING TABLE FAN

VENTILATEUR DE TABLE AVEC OSCILLATION DE 12”

VENTILADOR DE MESA CON OSILACION DE 12”

SAFETY PRECAUTIONS

WARNING

POLARIZED PLUG

This appliance has a polarized plug (one blade is wider than the other.) As a safety feature,

this plug ﬁts in a polarized outlet only one way. If the plug does not ﬁt into the outlet,

reverse the plug and try again. If it still does not ﬁt, contact a qualiﬁed electrician. Do not

attempt to defeat this safety feature.

ELECTRICAL CORD

The cord of this appliance was selected to reduce the possibility of tangling in or tripping

over a longer cord. If more length is needed, use an extension cord rated no less than 15

amperes. When using an extension cord, do not let it drape over the working area or dangle

where someone could accidentally trip over it. Handle cord carefully for longer life; avoid

jerking or straining it at outlet and appliance connections.

2 English

Be sure to shut off electric supply at main switch

or circuit breaker before installation. The impor-

tant safeguards and instructions on this manual

are not meant to cover all possible conditions

and situation that may occur. It must be under-

stood that common sense, caution and care are

factors which cannot be built into any product.

These factors must be supplied by the person(s)

caring for and operating the unit.

No responsibility will be accepted for any dam-

age which may occur during transport or by

improper installation or voltage fluctuation or

if any portion of the porduct has been altered or

modified.

• If the supply cord is damaged, it must be

replaced by the manufacturer or its service

agent or similar qualified person in order to

avoid a hazard.

• Never insert fingers, pencils or any other ob-

ject through the grille when the fan is running.

• Unplug the fan from the power socket when

moving it from one location to another.

• Unplug the fan from the power socket when

removing grilles for cleaning.

• Ensure the fan is standing on a stable surface

before operating.

• Do not place the fan close to an open window.

Rain splashing on the fan could cause an

electric shock hazard.

• Do not plug the AC cord into the wall outlet

until fan has been completely assembled.

• Never operate the fan with a cracked or dam-

aged fan blade.

• To reduce the risk of fire or electric shock, do

not use the fan with a solid state speed control

device.

• For indoor use only.

• This product employs overload protection

(fuse). A blown fuse indicates an overload

or short-circuit situation. If the fuse blows,

unplug the product from the outlet. Replace

the fuse (see How To Replace Fuse for

instructions) following the product markings

for proper fuse rating. Check the product. If

replacement fuse blows, a short-circuit may be

present and the product should be discarded or

returned to an authorized service facility for

examination and/or repair.

• Do not run cord under carpeting. Do not cover

cord with throw rugs, runners or similar cov-

erings. Do not route cord under furniture or

appliance. Arrange cord away from traffic area

and where it will not be tripped over.

• Never pull or yank on the cord or the appli-

ance.

• Do not replace attachement plug. This con-

tains safety device (fuse) that should not be

removed, Discard product if the attachment

plug is damaged.

PARTS

English 3

MORE PRECAUTIONS

• Use the fan only for purposes described in the

instruction manual.

• Use power source of the fan according to

electric nameplate under the base.

• To protect against electrical hazards, do not

wet, damp, immerse in liquid, or place this fan

near liquids.

• Turn unit off and unplug when leaving for an

extended period of time.

• Always turn the fan off and unplug before

cleaning.

• Do not store the fan where it can fall into

water or any other liquid.

• Store the fan in a cool dry place.

SAVE THESE

INSTRUCTIONS

FOR HOUSEHOLD

USE ONLY

HOW TO REPLACE FUSE

1. Open fuse cover - slide open fuse access cover

on top of attachment plug towards blade.

2. Remove fuse carefully - turn fuse holder over

to remove fuse.

3. Insert new fuse.

4. Close fuse cover - slide close the fuse access

cover on top of attachment plug.

WARNING! Risk of fire. Replace with same

size and rated fuse.

1. Front Grill

2. Cap

3. Blade

4. Nut

5. Rear Grill

6. Bolt

7. Shaft

8. Motor Cover

9. Oscillating Button

10. Motor Housing

11. Fan Pitch Adjustment

12. Plug & Wire

13. Switch

14. Fan Base

4 English English 5

OPERATING

INSTRUCTIONS

CARE & CLEANING

This appliance requires little maintenance and

contains no user serviceable parts. Do not try

to fix it yourself. Refer it to qualified service

personnel if servicing is needed.

The fan is permanently lubricated and will not

require additional lubrication for the life of the

fan.

TO CLEAN: Before cleaning, turn fan off and

unplug from electrical outlet. Wipe off excess

dust with a lint-free cloth. To ensure adequate

air circulation to the motor, keep vents located

at the rear of the motor housing free from dust

accumulation. A vacuum cleaner hose can be

used to clean these vents. Do not immerse

fan in water or any other liquid. Disassemble

grilles and blade. Grilles and blade may be

cleaned with mild soap and water. Use a soft,

slightly damp cloth to wipe the remaining fan

parts. Do not allow water or any other liquid

to get into the motor housing or base. Reas-

semble fan after grilles and blade have dried

completely. Do not plug fan into electrical

outlet until it has been fully reassembled.

TO STORE: Make sure to disassemble and

clean the fan before storing. Retain the original

packaging for the purpose of storing the fan.

Always store fan in a dry place. Never store

it while it is still plugged in. Never wrap the

cord tightly around the fan, and do not put

any stress on the cord where it enters the fan

housing, as it could cause the cord to fray and

break.

ASSEMBLY

INSTRUCTIONS

1. Insert motor assembly onto base and snap

into place making sure the wire is not pro-

truding from top of base (some models may

already be attached. If so, please skip this

step)

2. Attach rear grill onto motor assembly and

secure with screw-on collar

3. Insert fan blade onto motor assembly shaft

(align grooves on fan blade with extensions

on post) and secure with screw-on knob.

Note: Knob tightens counter-clockwise.

4. Secure front grill onto rear grill with grill

connector ring (grooves on grill connector

ring should align on front and rear grills)

and snap into place. You can tighten or

loosen the front grill by turning the screw

on the connector ring.

1. Place fan on flat surface and plug into

outlet.

2. Adjust fan head up or down by loosening

and then tightening tilt adjustment knob.

3. By simply pulling or pressing the oscilla-

tion knob, your fan can either turn from

side to side or stay in a fixed position.

For oscillation (turning) mode, make sure

oscillation knob is in the lower position.

For stationary (fixed) operation, make sure

oscillation knob is in the upper position.

4. On the base, press either “1” (low speed) or

“2” (high speed) depending on your prefer-

ence. Pressing “0” will turn the fan off.

WARRANTY

Length of Warranty

1 year from date of purchase

Within 1 year from date of purchase,

1) Return product to place of purchase

(if your dealer allows)

2) Send product postage pre-paid to:

I.E.A.C.

3030 East Vernon Avenue

Vernon, California, USA 90058

Please include original dated receipt,

explanation of defect and return name

and address as well as a contact phone

number.

We will, within 10 days of receiving

your product, return a new or refur-

bished (at our discretion) product at NO

ADDITIONAL CHARGE.

We will also return your receipt. If prod-

uct is found to be in working condition,

we will return product postage collect.

PACK YOUR PRODUCT WELL!

We will not be responsible for damages

incurred as a result of improper packing.

Or contact us via e-mail at

[email protected]

Page is loading ...

Impress 98583455M User manual

Brand: Impress

Model: 98583455M

Type: User manual

This manual is also suitable for

98580477M

Impress 98583455M is a 12” oscillating table fan that can be used to provide ventilation or cooling in indoor environments. Here is some brief product information:

It has 2-speed settings, low and high, which can be selected by pressing the corresponding button on the base of the fan.
The oscillation knob allows you to choose between stationary or oscillating operation.
The fan is equipped with a polarized plug for safety, which fits into a polarized outlet in only one way. If the plug does not fit into the outlet, reverse the plug and try again.
The fan has a fuse for overload protection. If the fuse blows, unplug the product from the outlet and replace the fuse following the instructions in the manual.

Download PDF

report