Miseno MNO281SS Installation guide

Miseno
Brand
Miseno
Model
MNO281SS
Type
Installation guide

This manual is also suitable for

Miseno MNO281SS is a single handle pre-rinse kitchen faucet that combines style and functionality. It features a durable construction with a stainless steel finish that resists corrosion and tarnishing. The faucet's high arc spout provides ample clearance for filling pots and pans, and its single lever handle allows for precise control of water flow and temperature. Additionally, the Miseno MNO281SS comes with a sprayer that can be used for rinsing dishes or cleaning the sink.

Miseno MNO281SS is a single handle pre-rinse kitchen faucet that combines style and functionality. It features a durable construction with a stainless steel finish that resists corrosion and tarnishing. The faucet's high arc spout provides ample clearance for filling pots and pans, and its single lever handle allows for precise control of water flow and temperature. Additionally, the Miseno MNO281SS comes with a sprayer that can be used for rinsing dishes or cleaning the sink.

TOOLS YOU WILL NEED
SAFETY TIPS
• Cover your drain to avoid losing parts.
• The fittings should be installed by a licensed
plumber in your State.
• When installing flexible hose, Please note there
should be no torsion or deformation; do not fold
into Shape V or L; do not use if there are any cracks
or deformation
Model
MNO281CP/SS
Questions, problems, missing parts?
Before returning to your retailer, please contact Customer Service at 1-855-480-2915 or [email protected]
BEFORE INSTALLATION:
If you contact Customer Service, you will need the Model#, Serial Number
and Date Code. Please locate the Product ID tag and Serial number tag.
Please record the serial number and date code here BEFORE YOU INSTALL:
__________________ ____________
Serial Number Date Code
Please attach your receipt for proof of purchase.
Phillips screwdriver
Adjustable wrench
Pipe tape
Silicone Sealant
MNO281A
Single handle pre-rinse kitchen faucet
FAUCET INSTALLATION PROCEDURE
To
avoid over tightening inlet port to spout shank, use a second wrench to prevent inlet port from turning while attaching water hose, as seen in diagram.
1. Shut off water supplies. Remove old faucet. Clean
sink surface in preparation for new faucet.
2. The cover plate (escutcheon) is optional. Please
determine whether you want to install it or not. Place
putty beneath the plastic gasket and install faucet
through center hole.
3. Unscrew screws on lock nut. Slide rubber washer and
metal washer onto shank. Secure shank with lock nut.
4. Tighten end of shank with wrench and slip coupling
nut onto inlet port.
SHUT OFF MAIN WATER SUPPLIES BEFORE INSTALLATION
!
CAUTION
5. Apply pipe tape onto threads of the water supply.
Tighten end of shank with wrench.
6. After installing faucet, remove spray head and turn
on water to remove any left over debris. Re-assemble
spray head.
Hot
Cold
Open
TROUBLESHOOTING
If you've followed the instructions carefully and your faucet still does not work properly,
take these corrective steps.
Problem Cause Action
Locking nut has come loose. O-ring
on cartridge is dirty or damaged.
Aerator is dirty or misfitted.
Hose and spray head connection may
be loose.
Tighten the locking nut. Clean or
replace O-ring.
Unscrew the aerator to check rubber
packing or replace the aerator.
Tighten the connection between the
spray head and hose.
Leaks underneath handle.
Aerator leaks or has an
inconsistent water flow pattern.
There are leaks from the hose
underneath the deck.
REPLACEMENT PARTS
1.
2.
8.
9.
10.
3.
4.
5.
6.
7.
11.
12.
1 Screw (M5 * 5mm L) A008003
2 Metal handle assembly A662A54
3 Handle trim ring A103044
4 Sleeve A041047
5 Adjusting ring A104002
7 Ceramic disc cartridge A507348N
8 Clip A012318KP-T
9 Spray head A568020N
11 Cover plate & putty plate A667A48
12 18" Stainless steel connection hoses A105695N
6 Handle adaptor
A017956
10 Mounting hardware
A603171
Maintenance
Your new faucet is designed for years of trouble-free performance. Keep it looking new by cleaning it periodically
with a soft cloth. Avoid abrasive cleaners, steel wool and harsh chemicals as these will dull the finish and void your warranty.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Miseno MNO281SS Installation guide

Miseno
Brand
Miseno
Model
MNO281SS
Type
Installation guide
This manual is also suitable for

Miseno MNO281SS is a single handle pre-rinse kitchen faucet that combines style and functionality. It features a durable construction with a stainless steel finish that resists corrosion and tarnishing. The faucet's high arc spout provides ample clearance for filling pots and pans, and its single lever handle allows for precise control of water flow and temperature. Additionally, the Miseno MNO281SS comes with a sprayer that can be used for rinsing dishes or cleaning the sink.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents