1 Screw & Plug A663A53
2 Metal Handle A079108
3 Handle Trim Cap A103121
4 Adjusting Ring A104332
5 Ceramic Disc Cartridge A507906N-31
6 Cover Plate Assembly A667003-S
7 Mounting Hardware Assembly A603171
8 Pull-Down Spray Head 1.75 gpm A568026N
9 Weight A504103ZN
10 Spray Hose G3/8 * 59'' A515111W
11 Hose Adaptor Assembly A663123N
Keep this manual for ordering replacement parts.
Replacement Parts
Minor problems often can be fixed without a plumber. Before doing any work on the faucet, shut off water supply and
close stopper or drain to avoid losing small parts.
noituloSesuaCmelborP
Troubleshooting Guide
Locking nut has come loose. O-ring
on cartridge is dirty or damaged.
Metal weight is not installed in the
appropriate position.
Hose and spray head connection
may be loose.
Tighten the locking nut. Clean or
replace O-ring.
Reinstall metal weight.
Tighten the connection between the
spray head and hose.
Leaks underneath handle.
Hose does not retract.
There are leaks from the hose
underneath the deck.
1.
2.
7.
3.
4.
5.
6.
10.
8.
9.
11.