Binks MACH 1A User manual

Brand
Binks
Model
MACH 1A
Category
Car kits
Type
User manual

This manual is also suitable for

77-2631-R8 (3/2018) 1 / 4 www.carlisleft.com
2
1
6
15
7
8
9
10
14
11
12
3
4
5
13
NOTE
Needle assembly (6) must
be installed into gun
BEFORE packing nut (14)
is tightened into place.
Packing assembly
Packing removal
screw (20-6536)
TO REPLACE PACKING
1. Remove material valve control knob (8),
spring (7) and pull out fluid needle (6).
2. Unscrew retaining ring (1) and remove
air nozzle (2) and fluid nozzle (3).
3. Remove existing packings.
4. Insert gland adapter (10), needle seal (11),
seal backup (12) and spring (13).
5. Screw on packing nut (14) a couple of turns so
its fits loosely by hand.
6. Re-install fluid nozzle (3), air nozzle (2),
retaining ring (1), needle assembly (6),
spring (7) and material valve control knob (8).
Finally, tighten packing nut (14) until it bottoms
out on fluid inlet (9).
NOTE: Numbers below in parenthesis ( ) refer to Item Nos. in illustration and Parts List.
Kits 54-4261 and 54-4262 are for the MACH 1 and MACH 1A
Kit 54-4262 includes Fluid Needle
Kit 54-4261 supplied without Fluid Needle
REPLACEMENT INSTRUCTIONS
BINKS SELF ADJUSTING PACKING KITS
(54-4261 & 54-4262)
EN
SERVICE MANUAL
EN
77-2631-R8 (3/2018)2 / 4www.carlisleft.com
SELF ADJUSTING PACKING KITS (54-4261 & 54-4262)
REPLACEMENT INSTRUCTIONS
(CONTINUED)
PROP 65 WARNING
WARNING: This product
contains chemicals known to
the State of California to cause
cancer and birth defects or
other reproductive harm.
1 54-3531 RETAINING RING ......................... N/A
2 — AIR NOZZLE ................................ N/A
3 — FLUID NOZZLE ............................. N/A
4 54-3543 HEAD INSERT .............................. N/A
5 — GUN BODY .................................. N/A
6 54-3941● FLUID NEEDLE ............................. 1
7 54-3518 SPRING ....................................... N/A
8 54-3606 MATERIAL VALVE CONTROL KNOB .. N/A
9 54-3533 FLUID INLET (STAINLESS STEEL) ........ N/A
10 54-4264●▲ GLAND ADAPTER ....................... 1
11 54-4265●▲ NEEDLE SEAL ............................ 1
12 54-4266●▲ SEAL BACKUP ........................... 1
13 54-4267●▲ SPRING .................................... 1
14 54-4263●▲ PACKING NUT ........................... 1
15 20-6536●▲ PACKING REMOVAL SCREW ....... N/A
ITEM PART
NO. NO. DESCRIPTION QTY.
ITEM PART
NO. NO. DESCRIPTION QTY.
PARTS LIST
When ordering, please specify Part No.
● Available as part of 54-4262 Self-Adjusting Packing Kit.
▲ Available as part of 54-4261 Self-Adjusting Packing Kit.
21
6
7
8
9
10
13
14
11
12
3
4
5
15
EN
77-2631-R8 (3/2018) 3 / 4 www.carlisleft.com
NOTES
EN
77-2631-R8 (3/2018)4 / 4www.carlisleft.com
WARRANTY POLICY
This product is covered by Carlisle Fluid Technologies’ materials and workmanship limited warranty.
The use of any parts or accessories, from a source other than Carlisle Fluid Technologies,
will void all warranties. Failure to reasonably follow any maintenance guidance provided
may invalidate any warranty.
For specic warranty information please contact Carlisle Fluid Technologies.
For technical assistance or to locate an authorized distributor,
contact one of our international sales and customer support locations.
Region Industrial/Automotive Automotive Renishing
Americas
Tel: 1-800-992-4657 Tel: 1-800-445-3988
Fax: 1-888-246-5732 Fax: 1-800-445-6643
Europe, Africa,
Middle East, India
Tel: +44 (0)1202 571 111
Fax: +44 (0)1202 573 488
China
Tel: +8621-3373 0108
Fax: +8621-3373 0308
Japan
Tel: +81 45 785 6421
Fax: +81 45 785 6517
Australia
Tel: +61 (0) 2 8525 7555
Fax: +61 (0) 2 8525 7575
Carlisle Fluid Technologies is a global leader in innovative nishing technologies.
Carlisle Fluid Technologies reserves the right to modify equipment specications without prior notice.
DeVilbiss
®
, Ransburg
®
, ms
®
, BGK
®
, and Binks
®
are registered trademarks of Carlisle Fluid Technologies, Inc.
©2018 Carlisle Fluid Technologies, Inc.
All rights reserved.
For the latest information about our products, visit www.carlisleft.com
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Binks MACH 1A User manual

Brand
Binks
Model
MACH 1A
Category
Car kits
Type
User manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents