© Adam Equipment Company 2017 www.adamequipment.com 6.6.0412 Rev A August 2017
Adam Equipment
AELPPALLETBEAMSSET‐UP
ThankyouforpurchasingyourAdamEquipmentAELPPalletBeams.
ThePalletBeamsconsistoftwobeambarslinkedwithonecable.Tounpack
andset‐upthePalletBeamsfollowthesesteps:
1) Removethe2beambarsfromthepackaging.Takecarewhenlifting
eachbarastheyareheavyandpleaseavoidbangingorknockingthe
bars.
2) Placeeachbeambaronthefloorensuringtheyarelevelbyadjusting
thefeetaccordingly.
3) Positionthebeambarsattheappropriatedistanceinordertosafely
weighyourpalletoritem,ensurethatthebeamsareplaced
sufficientlyclosesothatthepalletisnot“sagging”.
4) Ensurethatbothendsofthebeambarshavetheconnectorsonthe
sameend.
5) Connectbothpalletbeamcablestotheconnectorsusingthelead
provided,makingsurethecableiswellawayfromanypossible
trappingandisnotatriphazard.
6) Connecttheindicatorendtoyourindicatorandfollowtheindicator
instructions.