Page is loading ...
128.825UK User Manual
Mini HDMI Splitter 1x2
Item ref: 128.825UK
User Manual
This 4K compatible mini HDMI splitter allows a single HDMI source to be connected to two displays at the
same time. Supplied with an additional USB power lead should it be required, it can also be placed at the end
of a long HDMI cable to regenerate the signal.
Technical Specifications and Features
HDMI Version
1.4a
Video Format
Up to 1080p @ 60Hz, 3D, 36bit deep colour
Audio Format
DTS-HD, Dolby-trueHD, DTS, Dolby-AC3 and DSD (HBR)
Operating Temperature Range
-15 to +55°C
Max. Bandwidth
340 MHz
Max. Baud Rate
3.4Gbps
Max. Working Current
350mA
Dimensions
62 x 51 x 11(mm)
Weight
31g
Connection Instructions
128.825UK User Manual
Using an HDMI cable of the required length, connect one end to the input port of the device and the
other up to your source device (max length 15m).
Then using 2 additional HDMI cables connect up your display devices to the output ports (max length
20m).
The green LED’s on the front of the unit will indicate which device is live at any one time.
An additional USB power cable is supplied should your source devices not provide enough HDMI power
for the unit.
In The Box
1. HDMI Splitter 1x2
2. USB Power Lead (use only if required)
3. User Manual
Warning
For reasons of electrical safety this device must never be immersed in water, exposed to damp conditions
or excessive force.
Please do not use this device if you find that it is damaged in any way.
Do not attempt to repair this device or take apart under any circumstances, as this will invalidate your
warranty.
This product is classed as Electrical or Electronic equipment and should not be disposed with other household or commercial waste at
the end of its useful life. The goods must be disposed of according to your local council guidelines.
Errors and omissions excepted.
Copyright© 2016. AVSL Group Ltd.
/