Ignis SV304 BL A+ User guide

Type
User guide

This manual is also suitable for

1. Control panel
Refrigerator Compartment
2. Fan
2a. ON/OFF fan button
2b. cover of fan
3. Lighting
4. Shelves / Shelf area
5. Net shelf*
6. Multi-flow cold air system
7. Cooler compartment (best for meat and fish)*
8. Rating plate with commercial name
9. Fruits and vegetables crisper
10. Reversibility kit
11. Door trays
12. Separator
13. Egg tray
14. Door seals
Freezer Compartment
14. Door seals
15. Upper basket for freezing fresh food or to store
frozen food
16. "Eco green" basket (storage zone for frozen food
items)
17. Storage zone for frozen food items
Anti-bacterial protection
- Antibacterial filter* in the fan (2)
- Antibacterial additives* in the material of Crisper (9)
- Door seals are made of material able to inhibit bacterial
growth (14).
* Available on selected models
Notes:
- All shelves and door trays are removable.
- The internal temperatures of the appliance may be
affected by the ambient temperature, frequency of
door opening, as well as location of the appliance.
Temperature setting should take into consideration
these factors.
- The appliance accessories are not dishwasher safe.
- After inserting food, ensure that the freezer
compartment door closes properly.
HOW TO INCREASE FREEZER STORAGE CAPACITY
You can increase storage capacity in the freezer
compartment by :
- removing the baskets / flaps to allow the storage of big
products.
- placing the food products directly on the freezer shelves.
NET SHELF
The Net Shelf is the net which can
be used to store little items directly
under the glass shelf, taking full
advantage of this space. Pull down
the net shelf (using the lip on the
front) to load/unload it.
The net is flexible: do not stress it by loading it with bulky
or heavy items. Maximum weight allowed: 2 kg.
To remove the net (for cleaning purpose, or to use it under
another shelf), you have to first remove the glass shelf
under which the net is currently placed. The net shelf is
dishwashable.
HOW TO START THE APPLIANCE
After plugging the appliance to the mains, the appliance
starts working automatically.
The LEDs indicator on the control panel will light up for
approximately 1 second and after initialization process, the
temperature set-point will be displayed.
After appliance has started, wait at least 4-6 hours before
start placing food into it.
Note:
- If food is placed in the refrigerator before it has cooled
completely, it may deteriorate.
FAN
The fan improves temperature distribution inside the
refrigerator compartment, allowing better preservation of
stored food. By default, the fan is switched on.
It is advisable to keep the fan switched on, when the
ambient air temperature is above 27 ÷ 28°C or if you
notice drops of water on the glass shelves or in sever
humidity conditions.
Please note that when the fan is switched on it will not
continuously work. The fan will start/stop working
depending on the temperature and/or humidity level inside
the fridge. It is therefore absolutely normal if the fan does
not move even if the fan function is switched on.
Note:
Do not obstruct the air intake area with food items.
To guarantee the right performance at lower ambient
temperature (colder than 18°C) and to minimize Energy
Consumption, turn off the fan.
To turn off the fan press the button (2a).
If the appliance has the fan it can be equipped with the
antibacterial filter.
Remove it from the box found in the crisper drawer (item
9) and insert into the cover of fan (2b).
The replacement procedure is included in the filter box.
PRODUCT SHEET
GB
CAIGB FINDKNSGRPENLFD
CONTROL PANEL
1. "Night Tariff" function
2. Indication of temperature settings / Fast Cooling
3. Temperature selection / "Night Tariff" pushbutton
4. Internal light switch
TEMPERATURE SETTING
Press the Temperature button (3) on the control panel to
adjust the temperature from the warmest through the
lower to the coldest level. Pressing the Temperature
button, the temperature setting will change cyclically.
The temperature setting works for both the refrigerator
and the freezer compartments at the same time. At first
plug-in of appliance temperature setpoint is present at
medium position (factory setting).
Following table shows temperature setpoints:
FUNCTIONS
FAST COOLING
The use of the Fast Cooling function is recommended:
- to increase the cooling speed of the refrigerator
compartment when placing a very high quantity of
food within it,
- to maximize the freezing capacity of the freezer
compartment: for this reason you should activate
the Fast Cooling function before placing fresh food
to be frozen in the freezer compartment.
To activate the Fast Cooling function, select the Low
Temperature (see the "Temperature Setting" section),
press again once the pushbutton on the control panel:
all the 3 LEDs on the control panel will turn on.
The function is automatically deactivated after 6
hours.
The function can be manually deactivated by pressing
the same pushbutton on the control panel.
ECO GREEN
This function gives best food preservation
performance with the smallest energy consumption
possible if there is lower amount of food to be
preserved in the appliance.
When ECO GREEN function is activated only these
ECO compartments should be used in order to have
the perfect food preservation:
- 2 "eco green" areas in the fridge (indicated by green
stickers)
- 1 "eco green" basket in freezer compartment (16)
To active the Eco Green function press the
pushbutton on the control panel to choose the
mid–high temperature, as showed here below:
NIGHT TARIFF
Night Tariff function allows one to concentrate the
energy consumption of the product during off-peak
time (usually coinciding with night time), when energy
is available in large quantity and it costs less than
during the day (only in specific countries using
multiple-rate system based on off-peak times - check
your rate plan with your utility company).
To activate the function, press and hold the
pushbutton for 3 sec. at the starting moment of the
off-peak rate (depending on your specific rate plan).
For example, if the off-peak rate starts at 8 p.m., you
have to press and hold the pushbutton for 3 sec. at
that time. When the Night Tariff LED is ON, the
function is active.
After you activate the function, the product
automatically starts to adapt the energy consumption
to the time, i.e. consuming less energy during the day
then during the night.
IMPORTANT: In order to work in a correct way, the
function must be active both during the night and the
day.
The feature remains active until you deactivate it (or if
a blackout occurs, or if the product is switched off).
To deactivate the function, press and hold the
pushbutton again for 3 sec. When the Night Tariff
LED is OFF the function is not active.
Note: appliance energy consumption is declared with
"NIGHT TARIFF" function disabled.
Night Tariff
ON
Night Tariff
OFF
High temperature
Mid-high temperature
(Eco Green)
Middle temperature
Mid-low temperature
Low temperature
Legend
Led ON
Led OFF
CAFINDKNSGRIPENLFGBD
PRODUCT SHEET
GB
12
3
4
CAFINDKNSGRIPENLFGBD
5019 570 00006
Printed in Poland 01/13
PRODUCT SHEET
GB
ABNORMAL APPLIANCE OPERATION
When the product is plugged in to the mains, during first
10 minutes of its performance, possible temperature
sensor failure will be displayed according to following
table:
The appliance will work preserving the food stored, but it
is necessary to contact after-sales service and provide
alarm code.
CLEANING
Important: Before carrying out any cleaning or
maintenance operation, unplug the appliance or
disconnect it from the power supply.
Regularly clean the appliance using a cloth and a solution
of warm water, with some soft detergent suitable for
cleaning the inside of the refrigerator compartment.
Do not use abrasive detergents or tools.
To ensure continuous and correct flow of defrost water,
regularly clean the inside of the draining hole on the back
of the refrigerator near the fruit and vegetable drawer,
using the tool provided.
NO FROST FREEZER COMPARTMENT
No Frost freezers provide chilled air circulation around
the storage areas and prevent the formation of ice,
thereby completely eliminating the need for defrosting.
Frozen items don't stick to the walls, labeling stays legible
and storage space remains neat and clear.
NO FROST REFRIGERATOR COMPARTMENT
Refrigerator compartment defrosting is completely
automatic.
Droplets of water on the rear wall inside the refrigerator
compartment indicate that the automatic defrost phase is
in progress. The defrost water is automatically run into a
drain hole and collected in a container, where it
evaporates.
BULB's LIGHTING
Always disconnect the refrigerator from the power supply
before replacing any light bulb.
If the inside light is not working, it is necessary to:
1. Remove the light cover: put
the fingers into the side
ventilation holes (1), stretch
the cover gently and move it
upwards.
2. Check the bulb. If necessary unscrew the broken bulb
and replace it with a traditional bulb (with the same
characteristics of the previous one) or a LED bulb of
the same type available only at our After-sales Service
Centers or authorized dealers.
3. Put on the light cover.
Do not leave the bulb uncovered.
Refrigerator Evaporator
sensor failure
Refrigerator sensor failure
Refrigerator & Evaporator
sensor failure
Legend
Led OFF
Led Flashing
  • Page 1 1
  • Page 2 2
  • Page 3 3

Ignis SV304 BL A+ User guide

Type
User guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI