Panasonic TH-42PX25 Owner's manual

TH-37PD25

TH-42PD25

Operating Instructions

Digital Progressive

Plasma Television

Model No.

English

TQBC0761-1

Before connecting, operating or adjusting this product, please read these instructions completely.

Please keep this manual for future reference.

For assistance, please call : 1-888-VIEW-PTV(843-9788)

or send e-mail to : [email protected]

or visit us at www.panasonic.com (U.S.A.)

For assistance, please call : 787-750-4300

or visit us at www.panasonic.com (Puerto Rico)

TV

POWER

MENU

R-TUNE

PIP MIN

REW

PIP MAX

FF

PLAY

PROG

EXIT

VCR DVD

DBS

RCVR

CBL

LIGHT

TV/VIDEO

A -ANTENNA - B

SAP

1 2 3

4 5 6

7 8

0

9

AUX

A

S

P

E

C

T

M

U

T

E

R

E

C

A

L

B

E

STOP

PAUSE

FREEZE

TV/VCR

PIP SPLIT MOVE

SWAP

SEARCH

OPEN/CLOSE

PIP CH

DVD/VCR CH

REC

CH

VOL

CH

VOL

OK

2

WARNING: 1) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to

qualified service personnel.

2) Do not remove the grounding pin on the power plug. This apparatus is equipped with a three pin

grounding-type power plug. This plug will only fit a grounding-type power outlet. This is a safety feature.

If you are unable to insert the plug into the outlet, contact an electrician.

Do not defeat the purpose of the grounding plug.

WARNING: To reduce the risk of electric shock, do not remove cover or back.

No user-serviceable parts inside. Refer servicing to qualified service personnel.

The lightning flash with

arrow-head within a triangle

is intended to tell the user

that parts inside the product

are a risk of electric shock to

persons.

The exclamation point within

a triangle is intended to tell

the user that important

operating and servicing

instructions are in the papers

with the appliance.

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

Manufactured under license from BBE Sound, Inc.

Licensed by BBE Sound, Inc. under USP4638258, 4482866, 5510752 and 5736897.

BBE and BBE symbol are registered trademarks of BBE Sound, Inc.

This product incorporates copyright protection technology that is protected by U.S. patents and other

intellectual property rights. Use of this copyright protection technology must be authorized by

Macrovision Corporation, and is intended for home and other limited viewing uses only unless

otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited.

U.S. Patents Nos. 4,631,603; 4,577,216; 4,819,098; 4,907,093; 6,381,747; and 6,516,132.

: SD Logo is a trademark.

WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

Do not place liquid containers (flower vase, cups, cosmetics, etc.) above the set. (including on

shelves above, etc.)

WARNING: AS WITH ANY SMALL OBJECT, SD CARDS CAN BE SWALLOWED BY YOUNG CHILDREN. DO

NOT ALLOW CHILDREN TO HANDLE THE SD CARD.

Note:

Do not allow a still picture to be displayed for an extended period, as this can cause a permanent after-

image to remain on the Plasma Television.

Examples of still pictures include logos, video games, computer images, teletext and images displayed in

4:3 mode.

HDMI, the HDMI logo and High-Definition Multimedia Interface are

trademarks or registered trademarks of HDMI Licensing LLC.

CableCARD

TM

is a trademark of Cable Television Laboratories, Inc.

R

Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbols are trademarks of Dolby Laboratories.

3

1) Read these instructions.

All the safety and operating instructions should be read before the appliance is operated.

2) Keep these instructions.

The safety and operating instructions should be retained for future reference.

3) Heed all warnings.

All warnings on the appliance and in the operating instructions should be adhered to.

4) Follow all instructions.

All operating and use instructions should be followed.

5) Do not use this apparatus near water.

For example, near a bathtub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and

the like.

6) Clean only with dry cloth.

Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning.

7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

Slots and Openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to

protect it from overheating. The openings should never be blocked by placing the product on a bed, sofa, rug, or other

similar surface.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers)

that produce heat.

This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is

provided or the manufacturer’s instructions have been adhered to.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider

than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are

provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the

obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point

where they exit from the apparatus.

11) Only use attachments / accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the

apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid

injury from tip-over.

Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination

to overturn.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

This will prevent damage to the product due to lightning and power-line surges.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any

way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus,

the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15) To prevent electric shock, ensure the grounding pin on the AC cord power plug is securely connected.

Important Safety Instructions

4

Dear Panasonic Customer

For assistance, please call : 1-888-VIEW-PTV(843-9788)

or send e-mail to : [email protected]

or visit us at www.panasonic.com (U.S.A.)

For assistance, please call : 787-750-4300

or visit us at www.panasonic.com (Puerto Rico)

Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment

from your new Plasma TV.

To obtain maximum benefit from your set, please read these Instructions before making any adjustments,

and retain them for future reference.

Retain your purchase receipt also, and record the model number and serial number of your set in the

space provided on the back cover of these instructions.

Visit our Panasonic Web Site : www.panasonic.com

5

FCC STATEMENT

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of

the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference

to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This

device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

FCC CAUTION:

To assure continued compliance and possible undesirable interference, the provided ferrite cores must be

used when connecting this plasma television to video equipment; and maintain at least 40 cm spacing to

other peripheral devices. Refer to instructions on pages 10, 12, 13, 17, 18.

Any changes or modifications to this TV not expressly approved by Matsushita Electric Corporation of America

could result harmful interference and would void the user’s authority to operate this device.

FCC Declaration of Conformity

Model No.TH-37PD25, TH-42PD25

Responsible Party: Matsushita Electric Corporation of America

One Panasonic Way, Secaucus, NJ 07094

Contact Source: Panasonic Consumer Electronics Company

1-888-843-9788

email: [email protected]

Trademark Credits

•

VGA is a trademark of International Business Machines Corporation.

•

Macintosh is a registered trademark of Apple Computer, USA.

•

S-VGA is a registered trademark of the Video Electronics Standard Association.

Even if no special notation has been made of company or product trademarks, these trademarks have been fully

respected.

6

Table of Contents

Important Safety Instructions ....................................... 3

FCC STATEMENT ........................................................... 5

Safety Precautions ......................................................... 7

Cleaning and maintenance ........................................... 8

Installation ...................................................................... 9

Receiver Location ......................................................... 9

Optional External Equipment ........................................ 9

Remote Control Battery Installation .............................. 9

Accessories .................................................................. 10

Cable Connection......................................................... 11

Antenna Connection ................................................... 12

Cable Box Connection ................................................ 13

CableCARD

TM

Connection .......................................... 13

HDMI Connection ........................................................ 14

Digital TV - Set-Top Box (DTV-STB) or DVD Connection ...

15

VCR Connection ......................................................... 15

Amplifier Connection (TO AUDIO AMP) ...................... 16

Program Out Connection (PROG OUT) ...................... 16

Connecting Headphones / Earphones ........................ 17

Connecting to the front AV terminals ........................... 17

PC Input Terminals Connection................................... 18

Power ON / OFF ............................................................ 19

Location of Controls .................................................... 19

The Main Unit .............................................................. 19

The Illuminated Remote Control ................................. 20

First Time Setup ........................................................... 22

Watching TV programs ................................................ 23

VHF and UHF ............................................................. 23

Cable TV ..................................................................... 23

Menu Navigation .......................................................... 24

Picture ......................................................................... 26

Pic Mode ................................................................ 26

Color / Tint / Brightness / Picture / Sharpness / Normal ...

26

Other Adjust ........................................................... 26

Audio ........................................................................... 28

Bass / Treble / Balance / Normal ........................... 28

Other Adjust ........................................................... 28

Channel ....................................................................... 30

Favorite .................................................................. 30

Captions ................................................................. 31

Timer ........................................................................... 33

Sleep ...................................................................... 33

Timer ...................................................................... 34

Clock Set ................................................................ 35

Day Set .................................................................. 35

Setup ........................................................................... 36

Program CH ........................................................... 36

Auto Scan .............................................................. 37

Manual Program .................................................... 37

Closed Caption ...................................................... 39

Other Adjust ........................................................... 41

CableCARD

TM

........................................................ 41

Lock ............................................................................ 42

Password ............................................................... 42

Lock Set ................................................................. 42

Channel Lock ......................................................... 43

Block Program ....................................................... 43

How Long? ............................................................. 45

Blocking Messages ................................................ 45

Photo Viewer ................................................................ 46

Thumbnail Mode ......................................................... 48

Photo Viewer Setup Menu .......................................... 49

Slide Show ............................................................. 49

Rotate .................................................................... 50

Zoom ...................................................................... 50

Photo Viewer Troubleshooting ............................... 51

PIP (Picture in Picture) Operation .............................. 52

SPLIT Operation ........................................................... 54

Aspect Controls ........................................................... 56

PC MENU....................................................................... 57

Operating peripheral equipment using the remote control ...

59

Programming the remote control code ........................ 59

Infrared Code Index .................................................... 60

Mode Operational Key Chart ...................................... 63

Troubleshooting Chart ................................................. 65

VIDEO/COMPONENT/RGB/PC/HDMI input signals ... 66

Specifications ............................................................... 67

7

Safety Precautions

WARNING

Set up

Do not place the Plasma TV on sloped or unstable surfaces.

•

The Plasma TV may fall off or tip over.

Do not place any objects on top of the Plasma TV.

•

If water spills onto the Plasma TV or foreign objects get inside it, a short-circuit may occur which could result in fire or

electric shock. If any foreign objects get inside the Plasma TV, please consult an Authorized Service Center.

Do not cover the ventilation holes.

•

Doing so may cause the Plasma TV to overheat, which can cause fire or damage to the Plasma TV.

If using the pedestal, leave a space of 3

15

/

16

” (10 cm) or more at the top, left and right, 2

3

/

8

”

(6 cm) or more at the

bottom, and 2

3

/4” (7 cm) or more at the rear. If using some other setting-up method, leave a space of 3

15

/16” (10 cm)

or more at the top, bottom, left and right, and

3

/4” (1.9 cm) or more at the rear.

Avoid installing this product near electronic equipment that easily receives electromagnetic waves.

•

It may cause interference in image, sound, etc. In particular, keep video equipment away from this product.

AC Power Supply Cord

The Plasma TV is designed to operate on 120 V AC, 50/60 Hz.

Securely insert the power cord plug as far as it will go.

•

If the plug is not fully inserted, heat may be generated which could cause fire. If the plug is damaged or the wall socket

plate is loose, they should not be used.

Do not handle the power cord plug with wet hands.

•

Doing so may cause electric shocks.

Do not do anything that might damage the power cable. When disconnecting the power cable, hold the plug, not

the cable.

•

Do not make any modifications, place heavy objects on, place near hot objects, heat, bend, twist or forcefully pull the

power cable. Doing so may cause damage to the power cable which can cause fire or electric shock. If damage to the

cable is suspected, have it repaired at an Authorized Service Center.

If the Plasma TV will not be used for a long period of time, unplug the power cord from the wall outlet.

If problems occur during use

If a problem occurs (such as no picture or no sound), or if smoke or an abnormal odor is detected from the Plasma

TV, unplug the power cord immediately.

•

Continuous use of the TV under these conditions might cause fire or permanent damage to the unit. Have the TV

evaluated at an Authorized Service Center. Services to the TV by any unauthorized personnel are strongly discouraged

due to its high voltage dangerous nature.

If water or foreign objects get inside the Plasma TV, if the Plasma TV is dropped, or if the cabinet becomes damaged,

disconnect the power cord plug immediately.

•

A short may occur, which could cause fire. Contact an Authorized Service Center for any repairs that need to be made.

8

CAUTION

This Plasma TV is for use only with the following optional accessories. Use with any other type of optional

accessories may cause instability which could result in the possibility of injury.

(All of the following accessories are manufactured by Matsushita Electric Industrial Co., Ltd.)

•

Pedestal (included) ........................................... TY-ST42PA20

•

Wall-hanging bracket (Vertical) ......................... TY-WK42PV3U, TY-WK42PV2W

•

Wall-hanging bracket (Angled) .......................... TY-WK42PR2U

•

Display stand ..................................................... TY-DP4201W

Always be sure to ask a qualified technician to carry out set-up.

When using the Plasma TV

Do not bring your hands, face or objects close to the ventilation holes of the Plasma TV.

•

Top of the Plasma TV is usually very hot due to the high temperature of exhaust air being released through the ventilation

holes. Burns or personal injuries can happen if any body parts are brought too close. Placing any object near the top of the

TV could also result in heat damages to the object as well as to the TV if its ventilation holes are blocked.

Be sure to disconnect all cables before moving the Plasma TV.

•

Moving the TV with its cables attached might damage the cables which, in turn, can cause fire or electric shock.

Disconnect the power plug from the wall outlet as a safety precaution before carrying out any cleaning.

•

Electric shocks can result if this is not done.

Clean the power cable regularly to prevent it from becoming dusty.

•

Built-up dust on the power cord plug can increase humidity which might damage the insulation and cause fire. Unplug

the cord from the wall outlet and clean it with a dry cloth.

This Plasma TV radiates infrared rays, therefore it may affect other infrared communication equipment.

Install your infrared sensor in a place away from direct or reflected light from your Plasma TV.

Cleaning and maintenance

The front of the display panel has been specially treated. Wipe the panel surface gently using only a cleaning

cloth or a soft, lint-free cloth.

•

If the surface is particularly dirty, soak a soft, lint-free cloth in a weak detergent solution and then wring the cloth to

remove excess liquid. Use this cloth to wipe the surface of the display panel, then wipe it evenly with a dry cloth, of the

same type, until the surface is dry.

•

Do not scratch or hit the surface of the panel with fingernails or other hard objects. Furthermore, avoid contact with volatile

substances such as insect sprays, solvents and thinner, otherwise the quality of the surface may be adversely affected.

If the cabinet becomes dirty, wipe it with a soft, dry cloth.

•

If the cabinet is particularly dirty, soak the cloth in a weak detergent solution and then wring the cloth dry. Use this cloth

to wipe the cabinet, and then wipe it dry with a dry cloth.

•

Do not allow any detergent to come into direct contact with the surface of the Plasma TV.

If water droplets get inside the unit, operating problems may result.

•

Avoid contact with volatile substances such as insect sprays, solvents and thinner, otherwise the quality of the cabinet

surface may be adversely affected or the coating may peel off. Furthermore, do not leave it for long periods in contact

with articles made from rubber or PVC.

Note:

Do not allow a still picture to be displayed for an extended period, as this can cause a permanent after-image to remain

on the Plasma TV.

Examples of still pictures include logos, video games, computer images, teletext and images displayed in 4:3 mode.

Safety Precautions

9

Precaution on battery use

Incorrect installation can cause battery leakage and corrosion that

will damage the remote control transmitter.

Observe the following precautions:

1. Batteries should always be replaced as a pair. Always use new

batteries when replacing the old set.

2. Do not combine a used battery with a new one.

3. Do not mix battery types (example: “Zinc Carbon” with “Alkaline”).

4. Do not attempt to charge, short-circuit, disassemble, heat or burn

used batteries.

5. Battery replacement is necessary when remote control acts

sporadically or stops operating the TV set.

1. Open the cover.

2. Install the batteries and replace the

cover.

Note the correct polarity (+ and

-

).

Two AA size

For frequent remote control users, replace old

batteries with alkaline batteries for longer life.

Helpful Hints:

The Video/Audio connection between components can be made with shielded video and audio cables. For best performance,

video cables should utilize 75 ohm coaxial shielded wire. Cables are available from your dealer or electronic supply store.

Before you purchase any cables, be sure you know what type of output and input connectors your various components

require. Also determine the length of cable you will need.

Installation

Receiver Location

This unit is intended to be used with an optional stand or entertainment center. Consult your dealer for available options. Locate for

comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the screen.

Use of some types of fluorescent lighting can reduce remote control transmitter range.

Adequate ventilation is essential to prevent internal component failure. Keep away from areas of excessive heat or moisture.

Optional External Equipment

Whenever you remove the batteries, you may

need to reset the remote control infrared

codes. We recommend that you record the code

on page 59, prior to setting up the remote control.

Helpful Hints:

Remote Control Battery Installation

10

CH

VOL

CH

VOL

OK

POWER

TV/VIDEO

CBL

1 2 3

4 5 6

7 8

0

9

PIP MIN

REW

PIP MAX

FF

PIP MOVE

FREEZE

TV/VCR

SPLIT

SWAP

SEARCH

OPEN/CLOSE

PIP CH

DVD/VCR CH

TV

MENU

PLAY

PROG

EXIT

VCR DVD

DBS

RCVR

LIGHT

A -ANTENNA - B

SAP

AUX

A

S

P

E

C

T

M

U

T

E

R

E

C

A

L

B

E

STOP

PAUSE REC

Accessories

Check that you have the Accessories and items shown

Ferrite core

Small size × 6

Operating

Instruction book

Remote control

EUR7627Z10

Warranty card

Fixing bandAC cord

Batteries for the remote

control

(AA Battery × 2)

Pedestal

TY-ST42PA20

Customer card Service

center list

Customer care

plan card

Large size × 4

Attaching the ferrite core

Be sure to choose the appropriate size of ferrite core (large or small) and the correct setting of the cable (winding or

passing), as indicated by each connection diagram on the following pages (12, 13, 17, 18).

1

2

Pull back the

tabs (in two

places) to open.

Put the cable

and close.

Less than

4’’ (10 cm)

F-Type antenna

adapter

(for 3C-2V) (×2)

(for 5C-2V) (×2)

(Large size) (Small size)

11

Cable Connection

1

3

2

S-VIDEO

PC

CHANNELVOLUME

MENU OK

HPJ

VIDEO

VIDEO3

L AUDIO R

HPJ

S VIDEO VIDEO

INPUT 3

L AUDIO R

PROG OUT

COMPONENT VIDEO INPUT

S VIDEO

VIDEO

Y

P

B

L

R

P

R

12

1

2

INPUT

TO AUDIO

AMP

L

R

AUDIO IN

AV IN

VIDEO

HD

m

I

BAANTENNA

SERVICE ONLY

DIGITAL AUDIO

OUT

CABLE CARD

Cable In

Headphones /

Earphones jack

(see page 17)

Front AV terminals

(see page 17)

From EXTERNAL monitor terminal

on Computer (see page 18)

CableCARD slot

(see page 13)

DIGITAL AUDIO OUT terminal

(see page 16)

Antenna terminals

(see pages 12, 13)

HDMI terminal

(see page 14)

COMPONENT Input terminals

(see page15)

AV terminals

(see pages 15, 16)

– Cable fixing bands

Secure cables connected to terminals with bands as required.

Wrap the cable fixing band around cables then pass the pointed end through the

locking block, as shown in the figure.

While ensuring there is sufficient slack in cables to minimize stress (especially

in the power cord), firmly bind all cables with the supplied fixing band.

To tighten: To loosen:

Pull

Push the

catch

To fix: Push in till a

clicking sound is heard.

To release: Pull up

while drawing the knob.

– AC cord fixing

1 Connect power plug to the socket of

the main body.

2 Fix the left clamper.

3 Fix the right clamper.

12

B ANTENNA A

Cable In

Notes:

• Certain cable systems offset some channels to reduce interference or have Premium (scrambled) channels. A cable

converter box is required for proper reception. Check with your local cable company for its compatibility requirements.

• To obtain optimum quality picture and sound, an antenna, the correct cable (75 Ohm coaxial) and the correct terminating

plug are required.

• If a communal antenna system is used, you may require the correct connection cable and plug between the wall antenna

socket and your television receiver.

• Your local television service centre or dealer may be able to assist you in obtaining the correct antenna system for your

particular area and the accessories required.

• Any matters regarding antenna installation, upgrading of existing systems or accessories required, and the costs incurred,

are your responsibility.

VHF antenna

UHF antenna

Mixer

75 Ohm coaxial cable

Antenna Connection

Ferrite core (large size)

(supplied)

F-Type Antenna

Adapter (supplied)

Less than

4” (10 cm)

• For proper reception of VHF/UHF channels, an external antenna is required. For best reception, an outdoor antenna is

recommended.

• When you enjoy the terrestrial TV programs only, connect the home antenna to ANTENNA (A). When you enjoy both the

terrestrial TV programs and the cable TV programs, connect the cable TV’s cable to ANTENNA (A), and the terrestrial

antenna cable to ANTENNA (B).

• Select the antenna mode in Input Setup (see page 22).

Cable Connection

13

Cable Connection

ANT OUTPUT

ANT INPUT

B ANTENNA A

Cable In

Cable Box Connection

Back of the TV

CABLE BOX

Incoming cable

Ferrite core (large size)

(supplied)

• When you enjoy the cable TV programs only, connect the cable TV’s cable to ANTENNA (A). When you enjoy both the

terrestrial TV programs and the cable TV programs, connect the cable TV’s cable to ANTENNA (A), and the terrestrial

antenna cable to ANTENNA (B).

• Select the antenna mode in Input Setup (see page 22).

Less than

4” (10 cm)

CableCARD allows you to tune digital and high definition cable channels through the cable antenna. Consult your cable

company on the availability of CableCARD.

CableCARD

TM

Connection

BA

ANTENNA

SERVCE ONLY

DIGITAL AUDIO

OUT

CABLE CARD

Cable In

POD MODULE

I

NSERT T

H

I

S

END

Back of the TV

Upper side of the card

Notes:

• If you experience keyboard or remote control function hang-up when using CableCARD, unplug the TV and plug it back

on and try the controls again. If this condition still exists, please call Panasonic Customer Call Center for further instructions.

• Do not insert a PCMCIA card into CABLE CARD slot.

Procedure

1. Connect the cable antenna to ANTENNA (A).

2. Turn the TV on (see page 19).

3. Set the input mode to TV (see page 20).

4. Insert the CableCARD (as it’s upper side facing to your side) into CABLE CARD slot on the back of the TV.

Follow the messages displayed on the screen.

14

AV IN

L

R

A

UD

IO IN

HDMI Connection

HDMI

∗

1

(High Definition Multi media Interface) is the first all digital consumer electronics A/V interface that supports

uncompressed standard. The HDMI terminal supports both video and audio information.

To the HDMI

∗

1

input terminal, you can connect an EIA/CEA-861/861B

∗

2

compliant consumer electronic device, such as

a Set Top Box or DVD player with HDMI or DVI output terminal.

Input a High-bandwidth Digital Content Protection (HDCP) high-definition picture source to this HDMI terminal, so you

can display the high-definition pictures on this TV in the digital form.

∗

1. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI

Licensing LLC.

∗

2. EIA/CEA-861/861B profiles compliance covers profiles for transmission of uncompressed digital video including

high bandwidth digital content protection.

∗

3. HDMI-DVI conversion cable (TY-SCHO3DH): available on Panasonic Website (www.panasonic.com). Consult your

consumer electronics dealer for availability details.

Notes:

• This input terminal is not intended for use with computers.

• 1080i signals will be re-formatted to view on your plasma display.

Notes:

• This HDMI connector is Type A.

• If you connect an equipment without a digital output terminal, connect to the COMPONENT VIDEO, S VIDEO or

VIDEO input terminal on the TV so you can enjoy an analog signal.

• The DIGITAL IN terminal can only be used with 1080i, 480i or 480p picture signals. Set the Digital Set -Top -Box

DIGITAL OUT terminal Output setting to 1080i, 480i or 480p. For detailed information, refer to the Digital Set -Top -

Box instruction manual. If you cannot display the picture because your Digital Set -Top -Box does not have a

DIGITAL OUT terminal Output setting, use the component Video Input (or the S Video Input or Video Input). In this

case the picture will be displayed as an analog signal.

HDMI cable

HDMI

signal out

Set Top Box

DVD player

Audio cable

1080i

480p

480i

No. of dots (H

× ×

×

V)

1,920

× ×

×

1,080i

720

× ×

×

480p

640

× ×

×

480p

720(1,440)

× ×

×

480i

Vertical scanning frequency (Hz)

59.94/60

Cable Connection

Compatible VIDEO Signal

Compatible sampling freguency of AUDIO signal through HDMI (L.PCM) : 48 kHz / 44.1 kHz / 32 kHz

•

If the external device has DVI output only, use a

DVI to HDMI adapter cable

∗

3

to connect to the HDMI

terminal.

•

Connect the audio cables to the AUDIO IN terminals

for HDMI.

•

Select the audio setting in HDMI In (see page 29).

15

Cable Connection

This TV is capable of displaying 1080i and 480p DTV signals when connected to a DTV Tuner Set-Top-Box (STB). This

TV also utilizes a progressive scan doubler, which de-interlaces the NTSC signal and progressively scans the image.

• To view DTV programs, connect the STB to the component video input terminals (Y, P

B

, P

R

) of the TV. Component color

inputs provide luminance and separate color signal.

• Select the output of the STB to either 1080i or 480p.

• A DTV signal must be available in your area.

• Use a Panasonic DTV-STB (Digital TV-Set-Top Box) or DVD Player.

Digital TV - Set-Top Box (DTV-STB) or DVD Connection

DIGITAL TV OUTPUT

MAIN

VIDEO

AUDIO OUTPUT

P

B

P

R

Y

R

L

PROG OUT

COMPONENT VIDEO INPUT

S VIDEO

VIDEO

Y

P

B

L

R

P

R

12

INPUT

VIDEO

TO AUDIO

AMP

Back of the TV

Set Top Box

DVD player

Component Video cable

Audio cable

VCR Connection

S-Video cable

Video cable

Audio

cable

Back of the TV

VCR

PROG OUT

COMPONENT VIDEO INPUT

S VIDEO

VIDEO

Y

P

B

L

R

P

R

12

INPUT

VIDEO

TO AUDIO

AMP

OUTPUT

AUDIO

VIDEO

S VIDEO

RL

Note:

1080i signals will be re-formatted to view on your plasma display.

Note:

The S-VIDEO connection provides higher quality picture. It overrides other VIDEO connections. Use INPUT 2, AUDIO

L and R with S-VIDEO connection.

16

PROG OUT

COMPONENT VIDEO INPUT

S VIDEO

VIDEO

Y

P

B

L

R

P

R

12

INPUT

VIDEO

TO AUDIO

AMP

VIDEO

AUDIO

R

L

See optional equipment manual for further instructions for recording and monitoring.

Program Out Connection (PROG OUT)

VCR MONITOR

Video cable

Audio cable

Back of the TV

OR

Cable Connection

PROG OUT

COMPONENT VIDEO INPUT

S VIDEO

VIDEO

Y

P

B

L

R

P

R

12

INPUT

VIDEO

TO AUDIO

AMP

AUDIO INPUT

OPTICAL IN

R

L

DIGITAL AUDIO

OUT

Notes:

• External speakers cannot be connected directly to TO AUDIO AMP terminals.

• When ATSC channel is selected, the output from the DIGITAL AUDIO OUT jack will be Dolby Digital. When NTSC

channel is selected, the output will be PCM.

Amplifier Connection (TO AUDIO AMP)

Procedure

1. Select Speakers “Off” in Audio menu (see page 29).

2. Adjust the amplifier volume to the desired level.

Optical digital audio cable

Audio cable

Amplifier

For a full Home Theater sound experience, an external Dolby Digital

∗

decoder and a multichannel amplifier must be

connected to the DIGITAL AUDIO OUT terminal on the TV.

∗

Dolby Digital 5.1 channel surround sound delivers digital-quality sound. Dolby Digital provides five discrete full-bandwidth

channels for front left, front right, center, surround left and surround right, plus a LFE (Low Frequency Effect) subwoofer

channel.

or

Back of the TV

Notes:

• When a device (STB, DVD, etc.) is connected to the HDMI terminal (see page 14), no video or audio is output due to

license restrictions.

• Program Out signal may not be available when COMPONENT input (see page 20) is selected for the Main picture during

PIP or SPLIT operation (see pages 52, 54).

• When receiving digital channel signals, all digital formats are down-converted to composite NTSC video to be output

through Program Out terminals.

• Some programs contain Macrovision signal to prevent VCR recording.

17

Cable Connection

PC

HPJ

S VIDEO VIDEO

INPUT 3

L AUDIO R

M3 plug

Headphones /

Earphones

(not supplied)

Connecting Headphones / Earphones

Ferrite core (small size)

(supplied)

PC

S VIDEO VIDEO

INPUT 3

L AUDIO R

Push to open the front panel and connect equipment to front Audio/Video input terminals.

Connecting to the front AV terminals

A second VCR, video disc player, video game equipment and DSS equipment can also be connected to the video input

terminals. See the optional equipment manual for details.

Note:

The S-VIDEO connection provides higher quality picture. It overrides other VIDEO connections. Use INPUT 3, AUDIO

L and R with S-VIDEO connection.

CAMCORDER

Ferrite core (small size)

(supplied)

Video cable

Audio cable

S-Video cable

18

Cable Connection

PC Input Terminals Connection

Notes:

(1) Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical

scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200

lines.)

(2) The display resolution is a maximum of 640

×

480 dots when the aspect mode is set to “4:3”, and 852

×

480 dots when

the aspect mode is set to “16:9”. If the display resolution exceeds these maximums, it may not be possible to show fine

detail with sufficient clarity.

(3) Some PC models cannot be connected to the set.

(4) There is no need to use an adapter for computers with DOS/V compatible D-sub 15P terminal.

(5) The computer shown in the illustration is for example purposes only.

(6) Additional equipment and cables shown are not supplied with this set.

(7) Do not set the horizontal and vertical scanning frequencies for PC signals which are above or below the specified

frequency range.

PC

S VIDEO VIDEO

INPUT 3

L AUDIO R

Signal Names for D-sub 15P Connector

Pin Layout for PC Input

Terminal

Pin No.

1

2

3

4

5

Signal Name

R

G

B

NC (not connected)

GND (Ground)

Pin No.

6

7

8

9

10

Pin No.

11

12

13

14

15

Signal Name

GND (Ground)

NC (not connected)

GND (Ground)

Signal Name

NC (not connected)

NC

HD/SYNC

VD

NC

1

678

3

9

45

10

1514131211

2

COMPUTER

Ferrite core (small size)

(supplied)

Less than

4” (10 cm)

Audio

Stereo plug

Connect a cable which matches

the audio output terminal on the computer.

Conversion adapter

(if necessary)

Less than

4” (10 cm)

RGB

PC cable

Less than

4” (10 cm)

D-sub 15p

Ferrite core (large size)

(supplied)

Less than

4” (10 cm)

Ferrite core (small size)

(supplied)

Mouse

19

POWER

POWER button

Power ON / OFF

Connect the AC cord plug to the Plasma TV.

• Fix the power cord plug securely with the clamper

(see page 11).

2

Connect the plug to the wall outlet.

Remote control senser

Power indicater

Power on: Red

Power off: No Light

Press to turn the TV on or off.

TV VCR DVD

DBS

RCVR

CBL

LIGHT

TV/VIDEO

A -ANTENNA - B

SAP

AUX

A

S

P

E

C

T

R

B

E

POWER

Note:

The TV will still consume some power as long as the power

cord is inserted into the wall outlet.

1

3

The Main Unit

S-VIDEO

PC

CHANNELVOLUME

MENU

OK

HPJ

VIDEO

VIDEO3

L AUDIO R

SD CARD

PUSH-EJECT

POWER

S VIDEO

PC

CHANNELVOLUME

OK

MENU

TV/VIDEO

HPJ

VIDEO

INPUT3

L AUDIO R

SD CARD

PUSH-EJECT

POWER button

OK

Choose menu and submenu entry.

Volume adjusters

C.A.T.S. sensor

Plasma C.A.T.S. (Contrast Automatic Tracking System)

automatically senses the ambient light conditions and

adjusts the brightness and gradation accordingly, to

optimise contrast.

Effective when Pic Mode is set to Auto (see page 26).

SD CARD slot

Location of Controls

MENU

Display Main Menu or

return one step

backward in menus

(see pages 24, 57)

.

Channel selectors

Remote control sensor

TV/VIDEO

Change the input mode.

20

TV

POWER

MENU

R-TUNE

PIP MIN

REW

PIP MAX

FF

PLAY

PROG

EXIT

VCR DVD

DBS

RCVR

CBL

LIGHT

TV/VIDEO

A -ANTENNA - B

SAP

1 2 3

4 5 6

7 8

0

9

AUX

A

S

P

E

C

T

M

U

T

E

R

E

C

A

L

B

E

STOP

PAUSE

FREEZE

TV/VCR

PIP SPLIT MOVE

SWAP

SEARCH

OPEN/CLOSE

PIP CH

DVD/VCR CH

REC

CH

VOL

CH

VOL

OK

The Illuminated Remote Control

COMPONENT 2

HDMI

TV

COMPONENT 1

VIDEO 3PC VIDEO 1VIDEO 2

POWER

Turn the TV ON or OFF.

TV/VIDEO

Change the input mode.

SD

Access Photo Viewer

(see page 48).

R-TUNE

Switch to previously viewed channel and input modes.

Mode Selection buttons (see page 59)

Location of Controls

TV: TV

VCR: VCR

DVD: DVD

DBS: Digital Broadcasting Satellite

RCVR:Receiver/Amplifier

CBL: Cable TV

AUX: Aux

PIP MIN

REW

PIP MAX

FF

PLAY

STOP

PAUSE

FREEZE

TV/VCR

SEARCH

OPEN/CLOSE

PIP CH

DVD/VCR CH

REC

PIP MIN, PIP MAX

Change the size of PIP frame (see

page 52).

Operation of other Device (see

pages 63, 64)

SEARCH

Display search frames during PIP or

SPLIT operation (see pages 53, 55).

PIP CH

Select the channel during PIP or

SPLIT operation (see pages 52, 54).

FREEZE

Freeze the picture (see pages 53, 55).

PIP

PIP (Picture in Picture) Operation (see page 52)

SPLIT

Split Screen (see page 54)

MOVE

Move PIP frame (see page 53).

SWAP

Swap pictures in PIP or SPLIT operation (see pages 52, 54).

Page is loading ...

Panasonic TH-42PX25 Owner's manual

Panasonic TH-42PX25 Owner's manual

Related papers

Other documents