Shimano HB-TX505 Dealer's Manual

Brand: Shimano

Model: HB-TX505

Type: Dealer's Manual

(English)

DM-HB0005-06

HB-M3050

FH-M3050

HB-MT200

FH-MT200-B

HB-RM33

FH-RM33

FH-RM35

HB-TX505

FH-TX505

FH-TY505

FH-UR600

Dealer's Manual

Front hub/

Freehub (Disc brake)

CONTENTS

IMPORTANT NOTICE .............................................................................................. 3

TO ENSURE SAFETY ............................................................................................... 4

LIST OF TOOLS TO BE USED .................................................................................. 6

INSTALLATION ....................................................................................................... 8

Spoke lacing .................................................................................................................................................8

Installation of the disc brake rotor .............................................................................................................8

MAINTENANCE .................................................................................................... 10

Front hub ....................................................................................................................................................10

Freehub ....................................................................................................................................................... 11

IMPORTANT NOTICE

•

This dealer’s manual is intended primarily for use by professional bicycle mechanics.

Users who are not professionally trained for bicycle assembly should not attempt to install the components themselves using the dealer’s manuals.

If any part of the information on the manual is unclear to you, do not proceed with the installation. Instead, contact your place of purchase or a local

bicycle dealer for their assistance.

•

Make sure to read all instruction manuals included with the product.

•

Do not disassemble or modify the product other than as stated in the information contained in this dealer’s manual.

•

All manuals and technical documents are accessible online at https://si.shimano.com.

•

For consumers who do not have easy access to the internet, please contact a SHIMANO distributor or any of the SHIMANO ofﬁces to obtain a hardcopy

of the User's Manual.

•

Please observe the appropriate rules and regulations of the country, state or region in which you conduct your business as a dealer.

For safety, be sure to read this dealer’s manual thoroughly before use, and follow it for correct use.

The following instructions must be observed at all times in order to prevent personal injury and physical damage to equipment and surroundings.

The instructions are classiﬁed according to the degree of danger or damage which may occur if the product is used incorrectly.

DANGER

Failure to follow the instructions will result in death or serious injury.

WARNING

Failure to follow the instructions could result in death or serious injury.

CAUTION

Failure to follow the instructions could cause personal injury or physical damage to equipment and surroundings.

TO ENSURE SAFETY

WARNING

•

Be sure to follow the instructions provided in the manuals when installing the product.

Only use SHIMANO genuine parts. If a component or replacement part is incorrectly assembled or adjusted, it can lead to component failure and cause

the rider to lose control and crash.

•

Wear approved eye protection while performing maintenance tasks such as replacing components.

Be sure to also inform users of the following:

•

Before riding the bicycle, check that the wheels are secured. If the wheels are loose in any way, they may come off the bicycle and cause serious

injury.

•

If the quick release lever is on the same side as the disc brake rotor, conﬁrm that it does not

interfere with the disc brake rotor. Otherwise, the bicycle may fall forward, and serious injury

may result.

If the quick release lever interferes with the disc brake rotor, stop use and contact the place of

purchase or a distributor.

Quick release lever

Disc brake rotor

•

Make sure that the disc brake rotor has cooled down before operating the quick release lever. Failure to follow these instructions may result in burns

or injury.

•

Make sure to properly install the quick release hub onto the bicycle. Otherwise the wheel may detach from the bicycle while riding, resulting in serious

injury.

•

Make sure to read the manual for the quick release lever.

For installation to the bicycle, and maintenance:

•

When installing the front wheel to the front suspension fork, always be sure to follow the directions given in the manual for the front suspension

fork. The securing method and tightening torque for the front wheel both vary depending on the type of front suspension fork being used. If the

instructions are not followed, the front wheel may fall out of the front fork and serious injury may occur. When the front wheel is tightened onto the

front suspension fork in accordance with the tightening torque in the manual, the front wheel's rotation may become stiff; however, the instructions

must always be followed.

Quick release type

•

Use a front fork which is equipped with a wheel retention mechanism.

NOTICE

Be sure to also inform users of the following:

•

This product is not warranted against damage resulting from improper use, such as jumping while riding or if the bicycle falls over, except if such

malfunctions are caused by manufacturing methods.

•

Products are not guaranteed against natural wear and deterioration from normal use and aging.

•

For maximum performance we highly recommend Shimano lubricants and maintenance products.

For Installation to the Bicycle, and Maintenance:

•

If the wheel becomes stiff and difﬁcult to turn, perform an inspection.

•

Do not lubricate the internal parts of the hub. Otherwise, grease will ﬂow out.

The actual product may differ from the illustration because this manual is intended mainly to explain the procedures for using

the product.

LIST OF TOOLS TO BE USED

The following tools are needed for installation, adjustment, and maintenance purposes.

Tool Tool Tool

10 mm hexagon wrench TL-LR15 TL-HS37

12 mm hexagon wrench TL-HS33

Adjustable wrench TL-HS35

INSTALLATION

Spoke lacing

INSTALLATION



Spoke lacing

Check that the spokes have been laced as shown in the illustration.

A radial lacing cannot be used.

(w)

For front: Left (disc brake rotor)

side

(x)

For front: Right side

(y)

For rear: Left (disc brake rotor)

side

(z)

For rear: Right (sprocket) side

Rotating direction of wheel

(w) (x) (y) (z)



Installation of the disc brake rotor

Quick release type

(A) (B)

(A)

Disc brake rotor ﬁxing lock ring

(B)

TL-LR15

Tightening torque

40 N·m

MAINTENANCE

Front hub

MAINTENANCE



Front hub

The front hub can be disassembled as shown in the illustration. Apply grease to the various parts at periodic intervals. (The shape of the part varies

depending on the product.)

HB-M3050 / MT200 / RM33 / TX505