55 E. 111th Street, Indianapolis, Indiana 46280
350 South Edgeware Road, St. Thomas, ON N5P 4L1
© 2015 Masco Corporation of Indiana
Submitted Model No.:
Specific Features:
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both
without notice or obligation. Dimensions are for reference only. See current full-line price book or www.deltafaucet.com for
finish options and product availability.
DSP-L-35716LF Rev. D
LAVATORY FAUCET
■ Lorain
®
Collection
■ Two Handle Widespread Deck Mount
STANDARD SPECIFICATIONS:
• Max flow rate: 1.50 GPM @ 60 PSI,
5.68 L/Min @ 414 kPa
• Max flow rate (ECO models only): 1.20 GPM @ 60 PSI,
4.54 L/Min @ 414 kPa
• Three hole mount
• Hot and cold stems are interchangeable
• 1/4 turn handle stops
• Solid brass fabricated body and end valves
• Control mechanism is a rotating cylinder type with
stainless steel plate and 90° rotation, with replaceable
non-metallic seats
• Models have drain with pop-up type fitting with
plated flange and stopper
• Standard mounting deck thickness can be extended
by 1” (25 mm) with RP10612
WARRANTY:
• Lifetime limited warranty on parts (other than
electronic parts and batteries) and finishes: or, for
commercial users, for 5 years from date of purchase.
• 5 year limited warranty on electronic parts (other than
batteries); or, for commercial users, for 1 year from the
date of purchase. No warranty is provided on batteries.
Certified by
COMPLIES WITH:
• ASME A112.18.1 / CSA B125.1
• ASME A112.18.2 / CSA B125.2
Indicates compliance to
ICC/ANSI A117.1
• EPA WaterSense
®
• Verified compliant with 0.25% weighted average Pb
content regulations
35716LF-▲
35716LF-▲-ECO
▲ Designate proper finish suffix
6" to 16"
(152 mm to 406 mm)
3 3/16"
(81 mm)
6 11/16"
(171 mm)
3 x 1 1/8"
to 1 1/2"
(29 mm
to 38 mm)
hole size
2"
(51 mm)
2x 1 15/16"
(51 mm)
dia.
1 5/16"
(32 mm)
max. deck
thickness
4 3/16"
(106 mm)
4 1/4"
(108 mm)
Min. 2 1/2" (64 mm)
Clearance to Back Splash
Recommended
2 7/8"
(73 mm)
2 1/8"
(54 mm)
Dia.
1 5/8" (42 mm)
to
2 3/8" (61 mm)
3 1/2"
(89 mm)
4 7/8"
(124 mm)
1 1/4"
(32 mm)
Dia.
6 1/2"
(165 mm)
1/2"-14
NPSM