PURE Siesta Home User manual

Brand: PURE

Model: Siesta Home

Category: Radios

Type: User manual

Siesta Home

Introduction

Thank you for choosing the SiestaHome. This user manual will get

you up and running in no time.

If you need more help, visit support.pure.com.

Safety

Before you use your Siesta Home, read the followi ng safety instructions.

1. Read all the safety information and instructions before using the product. When passing this product to someone, include

all documents.

2. If you do not follow the operating instructions provided, it may compromise the safety of your product and this may inval-

idate the warranty.

3. Do not expose the product to dripping or splashing. Do not place objects filled with liquids, such as vases, on the

product.

If liquid or water spills onto the product, switch it off at the mains immediately, disconnect the mains plug and contact your

dealer.

Never touch the plug or the product with wet hands. Never pull the power cable when disconnecting the power adaptor

from the power supply.

4. Do not expose batteries to excessive heat or naked flames.

5. Dispose of batteries in accordance with local environmental rules.

6. Using the product in rooms or climates with high humidity and temperatures may cause condensation to form inside the

product, which can damage the product.

Use the product in moderate climates only.

7. Do not use your product in extremely hot or cold temperature. Keep the device away from heat sources, such as radi-

ators or gas/electric fires. Do not expose your product to naked flames, such as lighted candles.

8. The mains power adapter is used as the disconnect device and must remain operable.

Fit the mains adaptor to an easily accessible socket located near the product and use only the supplied mains power

adapter.

9. Only use the supplied 12V power adapter with your product (supplied by Pure with model SW1202400-IM). The power

adapter should only be used to power this radio and not for any other purpose.

10. Before you use your product, ensure that the available supply voltage corresponds with the required operational voltage

of the product.

11. Disconnect your product from the power supply if you will not use your product for a long period of time (for example, if

you are going on holiday).

12. Always unplug your product from the mains socket before cleaning. When cleaning the product, do not use any type of

abrasive pad or abrasive cleaning solutions as these may damage the product's surface.

13. To reduce the risk of electric shock, do not remove any screws. The product does not contain any user-serviceable parts

inside. Product repairs should only be carried out by authorised personnel.

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

Do not ingest the battery, Chemical Burn Hazard

The remote control supplied with the product contains a button cell battery. If the button cell battery is swallowed, it can

cause severe internal burns in just 2 hours and can lead to death.

Keep batteries away from children. If the battery compartment does not close securely, do not use the product and keep it

away from children. If you think someone has swallowed a battery or placed a battery inside their body, seek medical

attention immediately.

Symbols on the product and in the user manual

Potentially serious risk to your personal safety. To avoid possible injury or death, obey all safety notices with this

symbol.

Caution. Read the user manual before use.

12V DC 2.4A power supply.

Where to switch on the product or put it in standby.

DC connector polarity. The centre of the connector terminal is positive.

Introduction 1

Safety 2

Contents 3

Overview 4

Front and top 4

Rear 5

Controls 5

Remote control 7

Display 8

Getting started 9

Switching on for the first time 9

Changing the source 10

Digital radio 10

Listening to digital radio 10

Changing the radio station 10

Performing an autotune 10

FM radio 11

Listening to FMradio 11

Changing the radio station 11

Changing between stereo and

mono 11

Presets 11

Storing presets 11

Listening to presets 12

CD 12

Listening to a CD 12

Ejecting a CD 12

Shuffling tracks on a CD 12

Repeating tracks on a CD 13

Bluetooth 13

Pairing with a Bluetooth device 13

Disconnecting a device 14

SoundSpace EQ 14

Changing the equaliser 14

Alarms and timers 14

Setting an alarm 15

Cancelling an alarm 15

Snoozing or silencing an alarm 15

Setting a sleep timer 15

Setting a kitchen timer 16

Settings 17

Clock settings 17

Audio settings 17

Display settings 18

Changing the language 19

Resetting to factory settings 19

Updating the software 19

Specifications 20

Contents

Overview

Front and top

1Display

2CD drive

3Front panel controls

4Top panel controls

5Speaker

6Bass radiators

7Light sensor

8IRreceiver

For best performance, ensure the speaker and side bass radiators aren't obstructed.

Rear

1Input for supplied mains adapter

2USBAcharging port (5V, 1A)

33.5mm output for stereo headphones

4Telescopic aerial

Controls

Front panel controls

1 Play / Pause CD/Bluetooth: Start or pause playing the track.

2 Stop CD: Stop playing the CD.

3 Previous CD/Bluetooth: Skip to the previous track or restart the current track.

FM radio: Scan to the previous station.

4 Rewind CD: Hold to rewind the track.

FM radio: Manually tune to the previous radio station.

5 Fast forward CD: Hold to fast forward the track.

FM radio: Manually tune to the next radio station.

6 Next CD/Bluetooth: Skip to the next track.

FM radio: Scan to the next station.

7 Eject CD: Eject the CD or pull it in if it sits partly in the slot.

Top panel controls

1 Power Switch on your Siesta Home or put it in standby.

2 Menu Change settings and options. When in a menu, press to go back to the previous

screen.

3 Alarm Enter the alarm menu.

4 Presets Store and access your favourite radio stations.

5 Equaliser Change the SoundSpace EQ settings.

6 Sleep Enter the sleep timer menu.

7 Left Move between settings and options, or open the list of digital radio stations.

8 Select Select settings and options, or open the list of digital radio stations.

9 Right Move between settings and options, or open the list of digital radio stations.

10 Source Change between Digital radio, FM radio, CD and Bluetooth.

11 Volume Adjust volume.

Remote control

1 Power Switch on your Siesta Home or put it in standby.

2 Source Change between Digital radio, FM radio, CD and Bluetooth.

3 Menu Change settings and options. When in a menu, press to go back to the previous

screen.

4 Alarm Enter the alarm menu.

5 Presets Store and access your favourite radio stations.

6 Sleep Enter the sleep timer menu.

7 Equaliser Change the SoundSpace EQ settings.

8 Eject CD: Eject the CD or pull it in if it sits partly in the slot.

9 Mute Mute or unmute the volume.

10 Select Select settings and options, or open the list of digital radio stations.

11 Volume up Adjust volume.

12 Volume

down

Adjust volume.

13 Left Move between settings and options, or open the list of digital radio stations.

14 Right Move between settings and options, or open the list of digital radio stations.

15 Shuffle Enter the shuffle menu.

16 Repeat Enter the repeat menu.

17 Previous CD/Bluetooth: Skip to the previous track or restart the current track.

FM radio: Scan to the previous station.

18 Stop CD: Stop playing the CD.

19 Next CD/Bluetooth: Skip to the next track.

FM radio: Scan to the next station.

20 Rewind CD: Hold to rewind the track.

FM radio: Manually tune to the previous radio station.

21 Fast forward CD: Hold to fast forward the track.

FM radio: Manually tune to the next radio station.

22 Play / pause CD/Bluetooth: Start or pause playing the track.

At the bottom of the remote control there is a battery tray containing the battery. To access the battery

tray, use a fingernail to move the latch to the side and then pull out the tray.

Display

1Current time

2AM/PM indicator

3Digital radio/FM radio signal strength

4Volume level

5Source ( / / / )

6Repeat

7Shuffle

8Sleep timer

Kitchen timer

9Alarms

10 Information display area

Getting started

Switching on for the first time

Before you can start using your Siesta Home, you need to do the following:

1. Unclip and fully extend the aerial.

2. Fit the pin connector into the supplied mains adapter.

3. Connect the mains adapter to the input on the back of your Siesta Home and plug it into the

mains supply.

Note: The product identification and input/output rating specifications are given on the

bottom of the product, directly below the connections.

Read the safety instructions.

4. Press .

After you've switched on your Siesta Home for the first time, it starts tuning to digital radio stations.

After the autotune is complete, you can start listening to digital radio.

Changing the source

After you switch your Siesta Home for the first time, it sets to digital radio by default.

lTo change the source, press Source.

The source is selected in the following sequence: Digital radio > FM radio > CD > Bluetooth.

Digital radio

Listening to digital radio

lPress Source until DIGITAL RADIO is displayed and appears in the top-left hand corner of

the screen.

Changing the radio station

1. Press or to open the station list.

The list contains radio stations that were found during the last autotune.

2. Press or to browse through available radio stations.

3. Press Select to choose a radio station.

Performing an autotune

Your Siesta Home automatically scans for digital radio stations when you switch it on for the first time, or

if the station list is empty when you switch to digital radio.

If you move your Siesta Home to a new location, perform an autotune to update the list of radio stations.

1. Press Menu.

2. Press or until AUTOTUNE is displayed and then press Select.

Your Siesta Home starts scanning for digital radio stations.

FM radio

Listening to FMradio

lPress Source until FMRADIO is displayed and appears in the top-left hand corner of the

screen.

Changing the radio station

lTo scan to the previous or next radio station, press or .

lTo manually tune to a radio station, press or .

The frequency steps up or down by 0.05 MHz.

Changing between stereo and mono

By default, your Siesta Home uses mono reception for FM radio. If your FM radio stations have a weak

signal, mono reception improves the signal strength.

You can change between stereo and mono reception.

1. Press Menu.

2. Press or until FM STEREO or FM MONO is displayed, then press Select to change to that

mode.

Presets

On the top of your Siesta Home, you have four preset buttons. Use 1to 3for quick access to your

favourite radio stations. Use 4+ to open a list of all your presets.

You can save up to 20 digital radio stations and up to 20 FM radio stations in the presets list.

Storing presets

Storing a radio station to a preset from 1 to 3

1. Tune to the radio station you want to store.

2. Press and hold a preset button from 1to 3until STORED and the preset number are displayed.

If there is already a radio station saved to the preset you’ve selected, the new station

replaces it.

Storing a radio station to the presets list

1. Tune to the radio station you want to store.

2. Press 4+ to display the preset list.

3. Press or to choose a preset number.

4. Press and hold Select,4+ on the radio or Presets on the remote control until STORED and the

preset number are displayed.

If there is already a radio station saved to the preset you’ve selected, the new station

replaces it.

Listening to presets

Listening to a preset from 1 to 3

lPress a preset button from 1to 3.

Listening to any preset

1. Press 4+ to open the preset list.

2. Press or and Select to choose a preset.

You can listen to audio and MP3 CDs with your Siesta Home.

Listening to a CD

1. Press Source until CD is displayed and appears in the top-left hand corner of the screen.

2. Insert the CD into the slot on the front panel.

You can control the CD with the playback buttons on the front panel of the radio or using the remote

control. See page 5 or 7 for details.

When a CD is playing, the display shows the track number and elapsed time.

You can change the information on the display in Settings. See page 18 for details.

Ejecting a CD

lPress .

Shuffling tracks on a CD

You can use shuffle to play tracks in a random order.

Shuffling tracks using the top panel

1. Press Menu.

2. Press or until CD is displayed and then press Select.

3. Press or until SHUFFLE is displayed and then press Select.

When shuffle is enabled, is displayed on the screen. To disable shuffle and repeat, choose NORMAL.

Shuffling tracks using the remote control

lPress to turn on shuffle. is displayed on the screen.

lPress again to turn off shuffle. is not displayed on the screen.

Repeating tracks on a CD

You can repeat the current track, all tracks in an MP3 folder or the whole CD.

Repeating tracks using the top panel

1. Press Menu.

2. Press or until CD is displayed and then press Select.

3. Press or to change the repeat mode and then press Select.

REPEAT TRACK Repeat the track that is currently playing.

REPEAT FOLDER Repeat all the tracks in the folder. This setting is available only for

an MP3 CD.

REPEAT ALL Repeat all the tracks on the CD.

NORMAL Disable repeat and shuffle.

Repeating tracks using the remote control

lPress to choose the repeat mode. Each time you press , it changes to the next repeat

mode.

REPEAT TRACK flashes quickly on the screen.

REPEAT FOLDER flashes slowly on the screen.

REPEAT ALL is always displayed on the screen.

lTo disable repeat, press multiple times until is not displayed on the screen.

Bluetooth

You can use Bluetooth to wirelessly connect to a device, such as a mobile phone or tablet. You can then

stream music from your mobile phone or tablet through your Siesta Home.

The first time you connect a Bluetooth device to your Siesta Home, you need to pair them. After you've

paired a device with your Siesta Home, your Siesta Home remembers it for the next time.

Other Bluetooth devices can find your Siesta Home when your Siesta Home is in Bluetooth mode.

Pairing with a Bluetooth device

1. Press Source until BLUETOOTH is displayed and appears in the top-left hand corner of the

screen.

Your Siesta Home is now discoverable, which means other Bluetooth devices can find it.

The Bluetooth device name presented to devices is Siesta Home.

2. On your Bluetooth device, switch Bluetooth on and connect to your Siesta Home.

Note: For more information, see your Bluetooth device's user manual. If you are asked to

enter a passcode, enter 0000.

When BT CONNECTED is displayed on your Siesta Home screen, your Siesta Home is ready to

stream music.

If you want to connect a different Bluetooth device to your Siesta Home, switch off Bluetooth on the

connected device first.

Disconnecting a device

To disconnect a Bluetooth device, do one of the following:

lPress Source to switch to digital radio, FM radio, or CD.

lPress to put the radio into standby.

lSwitch off Bluetooth on the connected device.

Your Siesta Home doesn't reconnect automatically to your paired Bluetooth devices. After you

disconnect your Bluetooth device from your Siesta Home, you need to reconnect it manually.

SoundSpace EQ

You can use the SoundSpace EQ equaliser to get the most out of your music. There are several

equalisers set up already for enhancing the sound response and qualities. The audio presets are based

on the physical position of the radio as well as the acoustic feedback response and type of materials

used within the particular room.

Changing the equaliser

lPress until the equaliser you want to use is displayed.

LIVING

ROOM 1

Gives a clearer audio response suitable for spaces where softer furnishings dominate

LIVING

ROOM 2

Can be used for more sparsely furnished spaces and gives a slightly softer audio

response

KITCHEN Gives a tailored audio response suitable for spaces with predominantly harder materials

and surfaces, such as tiled floors and wall tiles cabinets (typically found in modern

kitchens and conservatories)

BEDROOM Offers detailed, clear audio ideal for bedrooms containing softer, absorbent, fabric-rich

furnishings (such as bedding, carpet, rugs and curtains)

STUDY Is tailored for near-field listening where Siesta Home is typically placed on a desk or mid-

height furniture and listening is done at close proximity

You can also change the equaliser in the main menu. See page 18 for details.

Alarms and timers

You can set up to four alarms on Siesta Home. The alarms switch the radio on and tune to a digital or FM

radio station, play a CD, or sound a tone.

The alarm duration is 60 minutes.

You can also use two timers. The sleep timer puts your Siesta Home in standby after a set amount of

time. The kitchen timer counts down and then ends with an alarm tone.

Setting an alarm

1. Press .

2. Press to browse through alarms.

3. Press Select to choose an alarm.

4. Press or to change the alarm setting to ON and then press Select.

5. Press or to change the setting value. Press Select to save changes and move to the next

setting.

ON TIME Choose the time for the alarm.

SOURCE Choose to wake up to an FM or digital radio station, a CD, or a tone.

To choose FM or digital radio, you need to save a radio station as a preset.

REPEAT Choose to sound an alarm once, daily, on weekdays, or on weekends.

VOLUME Choose the volume for the alarm.

Press Menu or to go back to the previous screen. Press and hold Menu to cancel the

alarm setup.

After you configure the volume, the alarm is saved and the corresponding alarm icon is

displayed on the screen, for example, .

Cancelling an alarm

1. Press .

2. Press to browse through alarms.

3. Press or to change the alarm setting to OFF and then press Select.

Snoozing or silencing an alarm

lTo snooze an alarm, press , or Select.

The default snooze time is 10 minutes. You can change it in Settings. See page 17 for details.

lTo silence an alarm, press .

Note: If you don't snooze or silence the alarm, it'll sound for 60 minutes.

Setting a sleep timer

1. Press Sleep.

2. Press or to change the duration of the timer and then press Select.

You can choose between 15 and 90 minutes.

3. Press Select to start the timer.

is displayed on the screen.

If both the sleep timer and kitchen timer are set, the icon of the sleep timer is displayed.

When the sleep timer ends, the radio volume decreases gradually for 30 seconds and then the radio

goes into standby.

Cancelling the sleep timer

lTo cancel the sleep timer while it's counting down, press .

Setting a kitchen timer

1. Press Menu.

2. Press or until KITCHEN TIMER is displayed and then press Select.

3. Press or to change the duration of the timer and then press Select.

4. Press Select to start the timer.

is displayed on the screen.

If both the sleep timer and kitchen timer are set, the icon of the sleep timer is displayed.

Cancelling the kitchen timer

1. Press Menu.

2. Press or until KITCHEN TIMER is displayed and then press Select.

3. Press or to change the duration of the timer to 00-00 and then press Select.

Settings

Clock settings

Your Siesta Home can use FM and digital radio signals to set the time and date automatically. If the time

and date don't update automatically, you can set them manually.

You can also change the date and time format, and the alarm snooze time.

Setting the date and time

1. Press Menu.