WARNING: BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT
BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ AND SAVE THESE INSTRUCTIONS.
Assembly Instructions
Daisy field Complete Pendant # PXS414
1. Thread two screws through the mounting strap, then secure
them with two lock nuts. Adjust the length of the screws
if necessary.
2. Attach the mounting strap to the outlet box by using two
mounting screws.
3. Choose the length of the chain you need, then spread one
end link of the chain to clamp securely to the loop.
4. Weave the cord and fixture grounding wire through
the chain and the canopy.
5. Clamp the other end link of the chain to the top loop.
6. Measure about 8" of the cord (A) from the top of the
canopy, then cut off the unnecessary cord. (See Fig.1)
7. Slit the cord apart into two wires (C), about 4" from the
top of the cord. Then use a knife to peel off the insulation
of the two wires at about 5/8" length(B) from the top of
the wires to expose the copper for wiring. (See Fig.1)
8. Pull out the outlet wires and house grounding wire from
the outlet box. Make wire connections with wire nuts:
---The smooth wire (marked) from the fixture to the black
wire from the power source.
---The ridged wire (unmarked) from the fixture to the white
wire from the power source.
---Attach the fixture grounding wire to the mounting strap
with the green grounding screw. Then connect it to the
house grounding wire with the wire nut.
Carefully put the wires back into the outlet box.
9. Attach the canopy to the mounting strap by inserting the
screws, then secure it with the bolt nuts.
10. Attach the shade to the socket, and then secure it with
socket ring.
11. Install a bulb (not included). Note relamping label at socket
or packaging area for maximum allowed wattage.
12. Turn on the power at the main fuse or circuit breaker box.
Cord
Ridged Wire
Smooth Wire
Canopy
A (8")
B (5/8")
C (4")
Fig.1
Chain
Cord
Socket Ring
Socket
Loop
Shade
Outlet Box
House Grounding Wire
Fixture Grounding Wire
Wire Nut
Screw
Canopy
Bolt Nut
Top Loop
Mounting Strap
Green Grounding Screw
Lock Nut
Mounting Screw
Bulb Type A Max.100W
(not included)