2
TOTAL AIR CARE!
By combining the functions of purification, humidification
and S-Plasma ion, you can create a clean and fresh indoor
environment.
Air purication/ Humid-purication /
S-Plasma ion, the harmony of the three
powerful air treatment devices.
• The heart of a purier: Dust collecting lter
Filter the ne dust completely by using the Dust
collecting lter which has an outstanding dust-collecting
function.
• Double allergen control
Eliminate the substances in the air cause allergies
by using the anti-allergen Dust collecting lter and
the Super plasma ion which is Samsung’s exclusive
technology.
• Outstanding hydration and purication eect:
The ne water particles produced by the air cleaner with
humidication functionare easily absorbed into the skin
and spread far and wide. In addition, it also eliminates
water soluble odor particles in the air to create a fresh
indoor environment.
• Active sterilization/control through Samsung Super
Plasma ion:
With hydroperoxy radical (HOO-) which is made by
combining active hydrogen(H) and oxygen ion(O₂-),
Samsung Super Plasma ion surrounds and sterilizes the
harmful substances oating in the air by destroying the
hydrogen bond of the protein structure. In addition,
the super plasma ion not only eliminates the germs,
viruses, and fungi but it provides fresh air because it
also combines with the active oxygen(OH-radical), to
neutralize the harmful oxygen to moisture status that is
harmless to humans.
• Clean humidication:
With a positive ion lter delays the production of
white powder created by minerals after the moisture is
evaporated.
Flu prevention mode
Automatically select the level of humidity which will
minimize the possibility of getting u.
Universal design
The appliance is designed to be user friendly and
harmonizes well with any indoor interior.
Skin protection mode
Automatically set the humidity level which will optimize
skin hydration.
Features of your air cleaner with
humidication function
Safety precautions ........................................................................... 3
Check before use .............................................................................. 6
Check the name of the components ...................................... 9
Standard mode ................................................................................. 11
Skin protection mode .................................................................... 12
Flu prevention mode ...................................................................... 13
Purier mode ..................................................................................... 14
S-Plasma ion mode ......................................................................... 15
Adjusting fan speed ........................................................................ 15
Setting o timer ................................................................................ 16
Sleep mode ......................................................................................... 17
Cleaning the air cleaner with humidication function ... 18
Trouble shooting .............................................................................. 25
Product specication ...................................................................... 26
Contents
AU170APSG_IB_E 33235A(3).indd 2 2011-09-01 �� 4:42:05
3
Safety precautions
Before using your air cleaner with humidication function, please read this manual thoroughly to ensure that you know how to
operate the extensive features and functions of your new appliance safely and eciently.
Important safety symbols and precautions:
WARNING
Hazards or unsafe practices that may result in severe personal injury or death.
CAUTION
Hazards or unsafe practices that may result in minor personal injury or property damage.
Follow directions.
Do NOT attempt.
Make sure the machine is grounded to prevent electric shock.
Unplug the power plug from the wall socket.
Do NOT disassemble.
FOR INSTALLATION
WARNING
Plug the power cord into a wall socket with the power specications of the product or higher and use the socket for this
appliance only. In addition, do not use an extension cord.
Sharing a wall socket with other appliances using a power strip or extending the power cord may result in electric shock or fire.
Do not use an electric transformer. It may result in electric shock or fire.
If the voltage/frequency/rated current condition is different, it may cause fire.
Do not install this appliance near a heater, inammable material. Do not install this appliance in a humid, oily or dusty
location, in a location exposed to direct sunlight and water (rain drops). Do not install this appliance in a location where
gas may leak.
This may result in electric shock or fire.
FOR INSTALLATION
CAUTION
This appliance should be positioned in such a way that it is accessible to the power plug.
Failure to do so may result in electric shock or fire due to electric leakage.
Install your appliance on a level and hard oor that can support its weight.
Failure to do so may result in abnormal vibrations, noise, or problems with the product.
Install the appliance allowing a space of 30cm around the appliance.
If you don’t allow the space for air intake, the humidification performance could be less efficient.
FOR POWER SUPPLY
WARNING
Remove all foreign substances such as dust or water from the power plug terminals and contact points using a dry cloth
on a regular basis.
Unplug the power plug and clean it with a dry cloth.
Failure to do so may result in electric shock or fire.
When the appliance or power plug or power cord is damaged, contact your nearest service center.
AU170APSG_IB_E 33235A(3).indd 3 2011-09-01 �� 4:42:05
4
Safety precautions
FOR POWER SUPPLY
WARNING
Plug the power plug into the wall socket rmly. Do not use a damaged power plug, damaged power cord or loose wall
socket.
This may result in electric shock or fire.
Do not pull the power cord, when unplugging the power plug.
Unplug the power plug by holding the plug.
Failure to do so may result in electric shock or fire.
Do not pull or excessively bend the power cord. Do not twist or tie the power cord. Do not hook the power cord over a
metal object, place a heavy object on the power cord, insert the power cord between objects, or push the power cord
into the space behind the appliance.
This may result in electric shock or fire.
FOR POWER SUPPLY
CAUTION
When not using the air cleaner with humidication function for a long period of time or during a thunder/lightning
storm, cut the power at the circuit breaker.
Failure to do so may result in electric shock or fire.
FOR OPERATION
WARNING
This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities,
or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children shculd be supervised to ensure that they do not play with the appliance.
If the appliance is ooded, please contact your nearest service center.
Failure to do so may result in electric shock or fire.
If the appliance generates a strange noise, a burning smell or smoke, unplug the power plug immediately and contact
your nearest service center.
Failure to do so may result in electric shock or fire.
In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately without touching the power plug. Do
not touch the appliance or power cord.
Do not use a ventilating fan.
A spark may result in an explosion or fire.
Do not unplug the power plug while it is operating.
Plugging the power plug into the wall outlet or turning the air conditioner on from the circuit breaker may cause a spark and
result in electric shock or fire.
When repairing the appliance, contact the service center.
Failure to do so may result in product malfunction, water leakage, electric shock, or fire.
Do not touch the power plug with wet hands.
This may result in electric shock.
After unpacking theair cleaner with humidication function, keep all packaging materials well out of the reach of
children, as packaging materials can be dangerous to children.
If a child places a bag over its head, it may result in suffocation.
Do not insert your ngers or foreign substances into the outlet when the air cleaner with humidication function is
operating.
Take special care that children do not injure themselves by inserting their fingers into the product.
Do not strike or pull the air cleaner with humidication function with excessive force.
This may result in fire, injury, or problems with the product.
Do not place objects near the appliance which children can use to step on the appliance.
Failure to do so may cause the product to fall down or the children could have an accident by falling off the appliance.
When repairing the appliance, contact the service center.
Failure to do so may result in product malfunction, water leakage, electric shock, or fire.
Do not detach the water bottle during the operation and do not put your hand into the air exhaust.
Failure to do so may result in electric shock and injury.
AU170APSG_IB_E 33235A(3).indd 4 2011-09-01 �� 4:42:05
5
FOR OPERATION
WARNING
Do not put metal or other foreign objects inside the appliance.
Failure to do so may result in electric shock and injury.
When water enters the power supply component, remove the power supply plug and then dry it completely before
using it again.
Failure to do so may result in electric shock and fire.
Do not shake and move the appliance while water is inserted in the water bottle and tray.
Failure to do so may result in water leak, electric shock and fire.
If any foreign substance such as water has entered the appliance, cut the power by unplugging the power plug and
turning the circuit breaker o and then contact your nearest service center.
Failure to do so may result in electric shock or fire.
Do not attempt to repair, disassemble, or modify the appliance yourself.
Do not use any fuse (such as cooper, steel wire, etc.)other than the standard fuse.
Failure to do so may result in electric shock, fire, problems with the product, or injury.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person
responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
FOR OPERATION
CAUTION
Use the appliance at least 2m away from other electronic appliances such as TV, Video and Audio.
Failure to do so may result in the deterioration of video quality and noise from other appliances.
Do not stand on top of the appliance or place objects (such as laundry, lighted candles, lighted cigarettes, dishes,
chemicals, metal objects, etc.) on the appliance.
This may result in electric shock, fire, problems with the product, or injury.
Do not operate the appliance with wet hands.
This may result in electric shock.
Do not spray volatile material such as insecticide onto the surface of the appliance.
As well as being harmful to humans, it may also result in electric shock, fire or problems with the product.
Do not tilt or overturn the appliance while it is plugged into the power supply.
Failure to do so may result in electric shock.
Do not use a damaged water bottle.
Failure to do so may result in electric shock and water leakage.
Do not put hot water (over 40°C) or polluted water (salt, detergent, chemicals) into the water bottle.
Failure to do so may result in product malfunction.
Do not install the appliance in a place where water might freeze.
Water lower than 6°C may result in product malfunction.
The correct water temperature for air cleaner with humidification function is between 16~30°C.
Do not put the appliance into the water.
Failure to do so may result in product malfunction.
Do not press the switch inside the groove at the bottom of the appliance with a nger or stick after detaching the front panel.
Failure to do so may result in product malfunction.
Do not drink the water in the tray.
Do not place the appliance close to the edge of the table.
FOR CLEANING
WARNING
Do not clean the appliance by spraying water directly onto it. Do not use benzene, thinner or alcohol to clean the
appliance.
This may result in discoloration, deformation, damage, electric shock or fire.
Before cleaning or performing maintenance, unplug the air conditioner from the wall socket and wait until the fan stops.
Failing to do so may result in electric shock or fire.
AU170APSG_IB_E 33235A(3).indd 5 2011-09-01 �� 4:42:05
6
Check before use
The correct temperature for the operation of air cleaner with humidication function
Indoor temperature: between 6°C~40°C
If you operate the appliance outside the standard temperature range, the appliance may not operate correctly.
Checking the following information in advance will enable you to use the air cleaner with humidication function more eectively.
Installation condition
Check the following installation requirement.
The installation area should be level, not sloping.
The area near the air intake and air exhaust should not be blocked.
The area should not be humid, nor have inammable material nearby.
The appliance should not intrude in the pathway of people.
The appliance should be installed near a power socket.
Check the power supply plug and socket
The power supply should be plugged into 220~240V socket only.
(When you plug the power supply into the socket, the appliance is switched
into the standby status of operation.)
When you are out or don’t use the appliance, unplug the power supply from the socket.
Using lter
The deodorization lter is packaged with vinyl, so remove the vinyl before using the lter.
To insert the lter, refer to the lter resetting in the cleaning and maintenance section.
Display current humidity
Display current humidity Indoor humidity
35% RH or less
36%~45% RH
46%~55% RH
56%~65% RH
66% RH or more
What is RH?
• RH stands for Relativity Humidity. The optimized indoor humidity is 50%~60%RH.
AU170APSG_IB_E 33235A(3).indd 6 2011-09-01 �� 4:42:05
7
1. While the air cleaner with humidication function is switched o, detach the
rear cover() and lift o() the water bottle by gripping the water bottle.
2. Turn the water bottle cap.
Turn the bottle cap in an anticlockwise direction.
Before opening the water bottle, press the port in the middle of the bottle cap,
which will release the vacuum and make the bottle cap easier to open.
3. Supply water for the water bottle.
Use tap water which shouldn’t be hotter than 40°C.
When lling the bottle, you should grip the water bottle.
4. Close the water bottle cap.
Turn the cap in a clockwise direction.
5. After putting the water bottle into the water bottle box(), t the rear cover().
Water supply
Use the tap water for the safe and long term use of air cleaner with humidication function.
①
②
Water
bottle
Rear
cover
Water
bottle
handle
Rear
cover
Water
bottle
Water
bottle
handle
Port
• When the appliance runs out of water during operation, ‘water supply’ LED will
be displayed.
• To start the humidication mode, allow about 1-5 minutes after lling the
water bottle with sucient water before the ‘water supply’ display goes o,
and then start the standard humidication mode.
• Use clean water.
•
Using reverse osmotic pressure ltered water or clean tap water is recommended.
•
Using tap water, with the chlorine element, can initially reduce bacteria breeding,
but it can form a lot of white powder around the disk or tray when the appliance
is used with tap water which has a high water hardness.
• If you assemble the water bottle incorrectly after supplying the water,
this may result in water leakage.
AU170APSG_IB_E 33235A(3).indd 7 2011-09-01 �� 4:42:06
8
Check before use
If you follow the correct maintenance information on your air cleaner with humidication function, you can use the appliance
safely and more eectively for a long time.
Information on the appliance
• The vapor of the evaporative air cleaner with humidication function is invisible.
- The vapor being evaporated is too ne to be seen.
• Only the moisture is evaporated. The dust and foreign substances are not evaporated.
• Breeze that is colder than surrounding air is generated during operation.
Other information
When operating the air cleaner with humidication function, you should use a lter.
The lter should be changed regularly.
If you use the air cleaner with humidication function without using the lter,
the purication will not be eective.
If the lter gets dirty, the purier performance will be less eective.
When the lter reset display is on or odor is generated, you should change the lter.
Maintenance
1. Clean the appliance after emptying the water in the water bottle and the appliance.
2. Remove the water from the appliance, water bottle, and purier lter completely.
Remove the water with a dry cloth or dry the appliance with cool breeze in the
shade.
3. When the appliance is not in use for a long time, replace it in the packing box and
keep it in a dry place out of the sun.
• If you leave water in the appliance for a long time, germs will breed
and the foreign substances in the water will be mixed with the
ambient air, which can cause product malfunctions such as corrosion
inside the air humid purier or blockage of the humidity exhaust.
AU170APSG_IB_E 33235A(3).indd 8 2011-09-01 �� 4:42:07
9
Check the name of the components
Air Cleaner with humidication function
Front panel
Attach and detach the
front panel to check a
disk, tray, and fan motor
Disk
Fan motor
Tray
Stores the water owing
into the air cleaner with
humidication function
Tray guide
Water bottle
Air intake
Sucks in the outdoor air
Rear cover
Open and close the rear
cover to check the water
bottle and dust lter
Dust lter
Filters the dust of the air
coming into the air intake
S-Plasma ion
Water adjustment
Adjusts the amount of
water supply or water
level in the air cleaner with
humidication function
Air outlet cover
Air outlet
Output of the humidity
or breeze
Display and button
control section
Tray rail
The connection part when
you put in or pull the tray
from the air cleaner with
humidication function
Dust collecting lter/
Deodorization lter
Odor sensor
Detects the odor
Detaching the front panel
Grip both sides of the upper part of the front panel and
pull the front panel toward you, then take the hangers
of the front panel from the grooves at the bottom of the
appliance to detach the front panel.
Attaching the front panel
Place the hangers of the front panel into the grooves on
each side of the bottom of the appliance and attach the
front panel.
The power supply will not come on unless the front
panel is attached correctly.
AU170APSG_IB_E 33235A(3).indd 9 2011-09-01 �� 4:42:07
10
Check the name of the components
Display and button control section
Buttons
Humidication display
Displays the current operation
Fan speed adjustment / Sleep mode display
Displays the fan speed adjustment and the
selection of the sleep mode
Water supply display
Displays when the
water level is low
O timer display
Displays the o time
for air cleaner with
humidication function
Current humidity display
Displays the current
ambient humidity
Button control section
Filter reset display
Current purication
level display
Displays the current air
purication level
S-Plasma ion display
Displays S-Plasma ion mode
Air cleaner with humidification function button Turn the air cleaner with humidification function On/Off
S-Plasma ion button Turn S-Plasma ion On/Off
Humidification button Select the desired humidification mode
Fan speed adjustment / Sleep button Select the fan speed or sleep mode
Off timer for with humidification function button Select the off time for air cleaner with humidification function
Displays the purication level
• The purication level is displayed through the odor sensor.
• Two minutes after turning on the appliance, the purication level will be displayed as ‘High’ since the sensor is
detecting the purication level in the air. Check the purication level after 2 minutes.
• Purication level
Low : Polluted, Medium : Normal, High : Puried
• When the air cleaner with humidication function is o, only the power button indicator will be on the display ;
when you start operating the appliance, the function and button you have selected will be displayed.
• The function is set when the indicator of the selected function is displayed and the beep sounds after pressing
the button.
AU170APSG_IB_E 33235A(3).indd 10 2011-09-01 �� 4:42:08
11
Standard mode
• When the current indoor humidity exceeds the standard humidity detection (55%), the standard mode will
stop and only the set fan speed of the breeze will be generated.
• When the current indoor humidity is lower than the standard humidity detection(55%), the fan speed of the
set standard mode works.
Adjust the indoor humidity for your preferred freshness by providing moisture for the dry indoor air in the winter.
When you turn on the air cleaner with humidification
function by pressing the [
] button, the ( ) standard
mode is automatically selected.
Selecting the S-Plasma ion
Each time you press the [ ] button, you can turn the Samsung Super Plasma ion on/o. (Refer to the page 15)
Selecting the operation
Each time you press the [ ] button, (Skin protection) (Flu prevention) (O humidication)
(Standard) modes are selected in rotation.
(O humidication) mode : When the air humid-purier is in O humidication mode, the display of standard/skin
protection/u prevention will also be o and at this time the purication function will be set
after stopping the humidication function.
Fan speed adjustment / Sleep mode
The fan speed at the initial stage of standard mode is set as (Low) and each time you press the [ ] button,
the fan sleep mode
(Medium) (High) (Sleep) (Low) is selected in rotation.
(Fan speed adjustment – Refer to the page 15, Sleep mode – Refer to the page 17.)
Setting the o timer
You can set o time for standard mode by pressing the [ ] button during operation. (Refer to the page 16.)
A feature of standard mode
User can adjust the fan speed of standard mode.
AU170APSG_IB_E 33235A(3).indd 11 2011-09-01 �� 4:42:08
12
Skin protection mode
Adjusts the indoor humidity so that your skin is not dry by automatically controlling the amount of humidity according to the
indoor temperature.
First, press the [ ] button and then press the
[
] button to select (Skin protection) mode.
Selecting the S-Plasma ion
Each time you press the [ ] button, you can turn the Samsung Super Plasma ion on/o. (Refer to page 15)
Selecting the operation
Each time you press [ ] button, (Flu prevention) (O humidication) (Standard) (Skin protection)
modes are selected in rotation.
Fan speed adjustment / Sleep mode
Fan speed is selected automatically and the sleep mode cannot be selected.
Setting the o timer
You can set the o time for skin protection operation by pressing the [ ] button during operation. (Refer to the page 16.)
A feature of skin protection mode
Skin protection mode maintains indoor humidity suitable for your skin hydration through the temperature/ humidity
detection sensor according to the standard humidity setting against the indoor temperature.
AU170APSG_IB_E 33235A(3).indd 12 2011-09-01 �� 4:42:09
13
Flu prevention mode
• The increase or decrease in the u virus survival rate is inuenced mostly by the surrounding temperature.
However, the u prevention mode is an auxiliary function, so it automatically sets the regular amount of
humidication to prevent your throat from being dry, which can reduce the possibility of getting u.
• When selecting u prevention mode, do not inhale the vapor produced by the air cleaner with humidication
function since the vapor is just the same as the vapor from other appliances.
• The temperature or detected humidity can vary according to the width of service space and installation
environment.
Adjusts the amount of humidication according to the indoor temperature to make an indoor environment in which the u
virus survival rate is minimized to reduce the possibility of getting u.
First, press the [ ] button and then press the
[
] button to select (Flu prevention) mode.
Selecting the S-Plasma ion
Each time you press the [ ] button, you can turn the Samsung Super Plasma ion on/o. (Refer to the page 15)
Selecting the operation
Each time you press the [ ] button, (O humidication) (Standard) (Skin protection)
(Flu prevention) modes are selected in rotation.
Fan speed adjustment / Sleep mode
Fan speed is selected automatically and the sleep mode cannot be selected.
Setting the o timer
You can set the o time for u prevention mode by pressing the [ ] button during operation. (Refer to the page 16.)
A feature of u prevention mode
Flu prevention mode reduces the u virus survival rate by supplying the correct amount of humidity suitable for the
current temperature through the temperature/humidity detection sensor according to the standard humidity setting
against the indoor temperature.
AU170APSG_IB_E 33235A(3).indd 13 2011-09-01 �� 4:42:09
14
Purier mode
Use the purier mode only in the summer time or in high humidity conditions.
When you turn on the air cleaner with humidification function
by pressing the [
] button, the standard mode is selected
automatically. At this time, press the [
] button to set the
purifier mode after selecting (Off humidification) mode.
Selecting the S-Plasma ion
Each time you press the [ ] button, you can turn the Samsung Super Plasma ion on/o. (Refer to the page 15)
Selecting the operation
Each time you press the [ ] button, (Skin protection) (Flu prevention) (O humidication)
(Standard) modes are selected in rotation.
(O humidication) mode : When the air humid-purier is in O humidication mode, the display of standard/skin
protection/u prevention will also be o and at this time the purication function will be set
after stopping the humidication function.
Fan speed adjustment / Sleep mode
Each time you press the [ ] button,
the fan speed or sleep mode is set in rotation as
(Medium) (High) (Sleep) (Low).
(Fan speed adjustment – Refer to page 15, Sleep mode – Refer to page 17.)
Setting the o timer
You can set o time for purifier mode by pressing the [ ] button during operation. (Refer to the page 16.)
• You can set the o time for purier mode by pressing the [ ] button during operation.
• The current humidity is displayed during the purier mode only.
• Even if the air humid purier runs short of water, you can still use the purier mode.
• Empty the water in the tray and the water bottle when the humidication mode is not in use.
AU170APSG_IB_E 33235A(3).indd 14 2011-09-01 �� 4:42:10
15
S-Plasma ion mode
Eliminate virus, fungus, and even active oxygen. The indoor air will be fresher by producing clean air.
Operating S-Plasma ion
• Even if the air humid purier runs short of water, you can still use the S-Plasma
ion mode.
• Empty the water in the tray and the water bottle when the humidication
mode is not in use.
• You can set the o time for S-Plasma ion mode by pressing the [
] button
during the operation. (Refer to the page 16.)
• The current humidity is also displayed during the Super plasma ion mode only.
• When you select the sleep mode, you cannot turn the Super plasma ion mode
on/o.
(The operation mode you set before selecting the sleep mode will operate.)
When the air cleaner with humidication function is on,
Press the [ ] button.
Each time you press the [ ] button, you can turn the Samsung Super Plasma ion on/o.
When the (O humidication) is operative,
Press the [
] button.
Each time you press the [ ] button, you can turn the Samsung Super Plasma ion on/o.
You can use the Super Plasma ion only.
Fan speed adjustment
Fan speed adjustment
Press [ ] button to select (Medium) (High) (Sleep) (Low).
Adjusting fan speed
You can adjust the fan speed in the standard mode or Super plasma ion mode.
Fan speed adjustment order
• You cannot use the fan speed adjustment function in the Skin protection / Flu
prevention mode.
• The initial operation of the standard / fan speed mode is automatically set as
'Low'.
When the standard mode or Super plasma ion mode are on.
Each time you press the [
] button, the fan speed is selected in rotation as
(Medium) (High) (Sleep) (Low).
When you set the o time for the stop humidication mode and the S-Plasma ion mode
at the same time, only the puried breeze will be generated.
AU170APSG_IB_E 33235A(3).indd 15 2011-09-01 �� 4:42:10
16
Setting o timer
Automatically turns o your air cleaner with humidication function at the desired time.
You can set the ‘o time’ in hourly units from 0H (continuously) ~ 9H (9hours).
O timer setting order
• When the set o time is passed, the air cleaner with humidication function
will be automatically turned o.
• After you set the o timer, if the power supply of the air humid purier fails or if
you set the o time as 0H by pressing the [
] button, the o timer function
will be canceled.
• When you set the o time, the remaining time will be displayed in hourly units
as the time goes by.
When the air cleaner with humidication function is on
Press the [
] button to set o time for the air cleaner with humidication function.
Each time you press the [ ] button, you can set the o time in hourly units from 0H
(continuously) ~ 9H (9hours).
If you don’t change the o time within 3 seconds of pressing the button, the current o
time on the display will be set.
AU170APSG_IB_E 33235A(3).indd 16 2011-09-01 �� 4:42:11
17
Sleep mode
You can have a deep and comfortable sleep with the sleep mode of your air humid purier.
First, press the [ ] button and then press the [ ] button
to select
(Sleep) mode.
Super plasma ion and standard mode
When selecting the (sleep) mode, the mode you set before the sleep mode will be maintained.
Selecting fan speed adjustment / Sleep mode
Each time you press the [ ] button the fan speed adjustment or sleep mode will be set in rotation as (Low)
(Medium) (High) (Sleep).
A feature of sleep mode
The fan speed in the sleep mode will be automatically set as (Low).
Setting the o timer
You can set o time for sleep mode by pressing the [ ] button during operation. (Refer to the page 16.)
• Even if the air humid purier runs out of water, the (water supply) alarm will not ring while in the sleep mode.
• The current humidity is not displayed in sleep mode.
• The display of the air humid purier will be less bright in sleep mode.
• After selecting the sleep mode, the [
] button, [ ] button, and [ ] button will not operate.
AU170APSG_IB_E 33235A(3).indd 17 2011-09-01 �� 4:42:11
18
Cleaning the air cleaner with humidication function
Cleaning the outer air cleaner with humidication function
Wet a towel with warm water, wring the towel tightly, and use to wipe the air cleaner
with humidication function clean.
1. Detach the front panel () and disassemble the air outlet cover by pulling it from
the air outlet cover box () while the air cleaner with humidication function is
switched o.
Pulling both upper sides of the front panel will detach the front panel.
2. Clean the cover with running water and dry it completely in the shade.
Rinse the air outlet cover with warm water containing a ph-neutral detergent
when there is too much dust on the cover.
3. After assembling the air outlet cover (), attach the front panel ().
After xing the air outlet cover into the air outlet cover box, push it inwards.
After putting the hangers on the front panel into the grooves on both bottom
sides of the appliance, attach the front panel.
The power supply will not come on unless the front panel is attached correctly.
Cleaning the air outlet cover
• Do not clean the display and button control section with alkaline detergent.
• Do not clean the surface of the air cleaner with humidication function with
sulfuric acid, hydrochloric acid liquids such as thinner, kerosene, and acetone.
Do not attach a sticker to the appliance since it will damage the surface of the
appliance.
When cleaning the appliance, you should unplug the power supply.
Front
panel
Air outlet cover
②
①
Air outlet cover
①
②
Groove for the hanger
Front
panel
AU170APSG_IB_E 33235A(3).indd 18 2011-09-01 �� 4:42:12
19
1. While the air cleaner with humidication function is switched o,
detach the rear cover () and lift o the water bottle from water
bottle box().
2. Turn the water bottle cap.
Turn the bottle cap in an anti clockwise direction.
Before opening the water bottle, press the port in the middle of the
bottle cap, to release the vacuum so the bottle cap can be opened
easily.
3. After cleaning the water bottle with running water, dry it completely
in the shade.
Clean the inside of the water bottle by using your hands.
4. Close the water bottle cap
Turn the bottle cap in a clockwise direction.
5. After replacing the water bottle into the water bottle box (), t the
rear cover().
Cleaning the water bottle
• When using the appliance for the rst few times, the operating time might be
delayed while the supply of water ows through. (Maximum 5minutes)
• Each time you supply water, check the condition of the water bottle and
clean it when it is dirty.
• Be careful of damage since the water bottle could be weakened by shock.
When the appliance gets damaged, do not use it as there is the danger of
water leakage. Contact a service center.
Water
bottle
Rear
cover
①
②
Water
bottle
Rear
cover
②
①
Water bottle cap
Purifier filter
Port
AU170APSG_IB_E 33235A(3).indd 19 2011-09-01 �� 4:42:12
20
Cleaning the air cleaner with humidication function
1. After detaching the purier lter from water bottle cap, put the lter
into the tap water and clean it by shaking slowly.
2. Fit the purier lter back into the water bottle cap.
1. Detach the rear cover (), and lift o the water bottle from water
bottle box () while the air cleaner with humidication function is
switched o.
2. After detaching the front panel, pull the tray toward you and lift o the
disk in the tray.
Pulling both upper sides of the front panel will detach the front panel.
Cleaning the purier lter (Positive ion lter)
Use the tap water for the safe and long term use of air cleaner with humidication function.
Cleaning the disk
When the appliance is not cleaned for a long time, sediment powder will form on the disk, so clean the disk frequently.
• Initial use : When you wash the lter for the rst few times, sometimes the water color can be dark red but will not
cause any harm to the human body.
• Water supply : When operating the appliance for the rst time after lling the water supply bottle, the initial operation
time can be delayed since it needs time for the water supply to ow through. (Maximum 5minutes)
• Replacement time : The replacement time for the purier lter can vary according to the elements of water and
service life. When white powder forms in the tray or disk, purchase a new lter and change.
• Maintenance : When the lter is not in use for a long time, detach the lter from the water bottle and keep the lter
in the vinyl package after drying it in the shade.
• Be careful of damage since the bottle water can be weakened by shock.
• Do not disassemble the purier lter, do not damage it, and do not make a hole in the lter net. The positive ion
resin will leak out of the lter.
• Do not drink the water ltered by a purier lter in the air cleaner with humidication function since it is not
edible water.
Water
bottle
Rear
cover
①
②
Tray
Disk
Front
panel
• The natural evaporative humidifying method produces moisture
only and impurities such as calcium dissolved in the water might
settle on the disk and tray. These are normal phenomenon of
using the evaporative humidifying method. Clean the appliance
more frequently according to the pollution level.
• Heavy impurities formed around the disk or tray may result in
diculty in cleaning, noise, and product malfunction.
AU170APSG_IB_E 33235A(3).indd 20 2011-09-01 �� 4:42:13
21
Water
bottle
Rear cover
②
①
Groove for screw
Fixed groove
for round
type screw
Screw
Screw
3. If the pollution level is low, clean the assembled disks with running
water. If the level of pollution is high, separate the disks before
cleaning them with running water.
(1) Unscrew the disks and separate the disk cover from the disks. Then
clean them with a wet soft cloth.
Turn the screws of the disks in an anti-clockwise direction to
disassemble the disks.
Rinse the disks with warm water containing a ph-neutral detergent
when there is too much dust on the disk.
(2) Fit each disk into the xed groove and attach the disk cover.
Consider the xed groove for round type screw as the center, and t
the disks into the grooves, matching up the other screw holes. Place
the screws in the six holes and turn the screws to assemble the disks.
Tighten the screws so they will not unfasten.
Clean the disks with running water.
4. Push the tray and the disk inwards with the disk xed into the tray
and then attach the front panel.
When putting the disk into the tray, x the disk into the disk holder
board.
After putting the hangers on the front panel into the grooves on
both bottom sides of the appliance, attach the front panel.
The power supply will not come on unless the front panel is attached
correctly.
5. After putting the water bottle into the water bottle box (
), t the
rear cover(
).
Disk
Front
panel
Tray
Groove for the hanger
Cleaning the disks after disassembling
Cleaning the disk without disassembling
• If there is white powder around the groove of the disk gear, noise
may be generated, so remove the white powder with a soft brush.
• Clean the disk every one or two months. However, the cleaning
period can vary according to the service time and environment.
If the appliance is installed in a place that is exposed to a lot of
dust, clean the appliance more frequently.
• If you clean the disk without disassembling, you should clean the
disk every two weeks.
AU170APSG_IB_E 33235A(3).indd 21 2011-09-01 �� 4:42:14
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
