Specifications
DESCRIPTION
• Metal construction with various nishes identied by sux
• 1/2" IPS connections
• Includes non-metal push-down waste assembly
OPERATION
• Lever style handles
• Maximum handle(s) rotation angle is 90° to full on
• Rotate hot side counterclockwise to open (clockwise to close)
• Rotate cold side clockwise to open (counterclockwise to close)
FLOW
• Water usage is limited to these maximum ow rates as indicated by the
corresponding product markings
°
1.2 gpm max (4.5L/min) at 60 psi
CARTRIDGE
• 1224 cartridge design
• Nonmetallic and stainless steel material
STANDARDS
• Third party certied to WaterSense®, ASME A112.18.1/CSA B125.1, and all
applicable requirements referenced therein including NSF 61/9 & 372
• Products marked with 1.2 gpm are compliant with California water
eciency regulations
• Complies with California Proposition 65 and with the Federal Safe Drinking
Water Act
• ADA
for lever handles
WARRANTY
• Lifetime limited warranty against leaks, drips and nish defects to the
original homeowner
• 10 year limited warranty when used in a multifamily installation
• 5 year limited warranty when used in a commercial installation
Visit www.moen.com/support for complete details and limitations
Lindor™
4" Lavatory Faucet
Models: 84506 series
NOTE: THIS FAUCET IS DESIGNED TO
BE INSTALLED THROUGH 3 HOLES,
1" MIN. DIA.
FOR MORE INFORMATION CALL: 1-800-BUY-MOEN
www.moen.com
CRITICAL DIMENSIONS
(DO NOT SCALE)
1/19
4-3/16"
(107mm)
5-3/16"
(132mm)
6-1/2"
(165mm)
4"
(102mm)
5-1/2"
(140mm)
4-11/16"
(119mm)
2-11/16"
(67mm)
6-1/2"
(165mm)
2-9/16"
(65mm)
1/4"(6mm) Min. Deck Thickness
1-3/16"(30mm) Max. Deck Thickness
-
1
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI