Delta T13020-SS Dimensions Guide

Type
Dimensions Guide

This manual is also suitable for

Submitted Model No.: _______________________________________________
Specific Features: __________________________________________________
STANDARD SPECIFICATIONS:
• Maintains a balanced pressure of hot and cold water even
when a valve is turned on or off elsewhere in the system.
• For use with MultiChoice
®
Universal rough valve body.
(R10000 Series)
• Back-to-back installation capability.
• Solid brass forged body.
• Temperature only controlled with metal lever handle.
• Field adjustable to limit handle rotation into hot water zone.
• 120° maximum handle rotation.
• All parts replaceable from the front of the valve.
Models with "LTS" suffix supplied with 7" long non-diverter
slip-on spout (RP36498).
• T13220-H2O uses RP46384.
• T13220-H2OT uses RP54752.
• DPE = 1" deeper escutcheon (RP21633).
• Models with "CER" use ceramic cartridge RP74236.
• Stem extension kit RP77991 can be ordered to allow for an
additional 1 3/4" wall thickness. RP77991 ships with
chrome escutcheon screws. For special finishes also order
RP12630 escutcheon screws in desired finish.
• Shower head max flow rate 1.5 gpm @ 80 psi,
5.7 L/min @ 550 kPa
• Shower head max flow rate 1.75 gpm @ 80 psi,
6.6 L/min @ 550 kPa
• Tub port max flow rate 8.6 gpm @ 60 psi
with R10000-UNBX
Note: Product will be marked with flow rate of specific
shower head.
T13220
7"
(178 mm)
Dia.
2 3/4"
(70 mm)
Face of plasterguard
should be flush with
finish wall line
Supply
8" (203 mm)
min.
18" (457 mm)
max.
2 1/2"
(64 mm)
7"
(177.8 mm)
4 3/4"
(121 mm)
RP36498 (Slip-On Metallic)
RP5833
2 5/8"
(66 mm)
2 3/4"
(70 mm)
RP38357
1.75 GPM
Touch-Clean
®
Shower Head
TUB AND SHOWER
FAUCET TRIM
Classic Bath Collection
Valve Only (T13020 Series)
Tub Only (T13120 Series)
Shower Only (T13220 Series)
Tub and Shower (T13420 Series)
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue
models, both without notice or obligation. Dimensions are for reference only. See current full-line price book or
www.deltafaucet.com for finish options and product availability.
DSP-B-T13020 Rev. R
T13120
T13120-LTS
T13220-SHC
T13220-
SHCCER
3 7/8"
(98 mm)
4 1/2"
(114 mm)
T13220-H
2
O
RP54752
1.5 GPM
H
2
O Shower Head
Designate proper finish suffix
RP48717
3 3/16"
(81 mm)
2 3/4"
(70 mm)
T13220-H
2
OT
RP21633
Deep Escutcheon
(Use if valve
is underflush.)
RP19809
Escutcheon
RP43381 1.75 GPM
Touch-Clean
®
Raincan Shower Head
4 3/4"
(121 mm)
4 7/8"
(124 mm)
Full Body
Spray
Massaging
Spray
RP46384
1.5 GPM
H
2
O Shower Head
3 1/4"
(83 mm)
4 3/4"
(121 mm)
COMPLIES WITH:
ASME A112.18.1 / CSA B125.1
ASSE 1016
Indicates compliance to
ICC/ANSI A117.1 - Valve control only
• EPA
WaterSense
®
- applies to T13220, T13220-
SHC, T13220-SHCCER, T13220-H2O, T13220-H2OT,
T13420-SHC, T13420-SHCCER, RP46384, RP43381,
RP38357, and RP54752 only
Soft Drench
Spray
Full Body
Spray
Full Body
Spray
Full Body
Spray
T13420-SHC
T13420-
SHCCER
T13020
T13020-DPE
FEATURES:
• 13 Series pressure balanced bath mixing valve trim
• "-H2O" models include H
2
Okinetic
®
Technology
shower head
RP77991 Available Extension Kit
Delta Faucet Company
55 E. 111th Street, Indianapolis, IN 46280
350 South Edgeware Road, St. Thomas, ON N5P 4L1
© 2019 Delta Faucet Company
WARRANTY
Parts and Finish - Lifetime limited warranty; or for
commercial purchasers, 10 years for multi-family
residential (apartments and condominiums) and
5 years for all other commercial uses, in each case
from the date of purchase.
Electronic Parts and Batteries (if applicable) - 5
years from the date of purchase; or for commercial
purchasers, 1 year from the date of purchase. No
warranty is provided on batteries.
SHOWER HEAD(S)
POMME(S) DE DOUCHE
CABEZA(S) DE REGADERA
  • Page 1 1

Delta T13020-SS Dimensions Guide

Type
Dimensions Guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI