2. Highwood
  3. AD-CNA36-ACE
AD-CNA36-ACE

Highwood AD-CNA36-ACE Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Highwood AD-CNA36-ACE Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com.
PAGE 1 OF 2
INCLUDED TOOLS
5/32" HEX KEY
IMPORTANT!
DO NOT fully tighten the bolts until all
bolts are started. Once all bolts are inserted,
go back & tighten all the bolts.
Retain these instructions for future reference
HARDWARE
high
wood
NATURE'S CLOSEST RIVAL
Adirondack Collection
Hamilton Counter Deck Chair
Assembly Guide
1) Insert an A bolt into lower hole to on each side
attach Seat to Back. Make sure the back is fully upright.
Make bolts snug, but do not overtighten.
AD-CHCA2
10.13.16
A
x18
1/4"-20 x 1-3/4"
A
A
RIGHT LEG
SEAT
2) Attach Right Leg to
Seat using three A bolts.
Note: arm above back support
DETAIL A
SCALE 0.16 : 1
C
For information on Care and Cleaning or to register your
highwood product, please visit www.highwood-usa.com.
PAGE 2 OF 2
high
wood
NATURE'S CLOSEST RIVAL
Adirondack Collection
Hamilton Counter Deck Chair
Assembly Guide
AD-CHCA2
10.13.16
3) Attach Footrest to Right Leg using 4 A bolts.
4) Flip chair and lay on right side.
Repeat steps 2 and 3 for Left Leg.
5) Attach arms to the back using 2 A bolts.
6) Tighten all bolts. Enjoy your highwood chair!
A
Note: Footrest faces front of chair
RIGHT LEG
ARM
BACK
FOOTREST
A
Note: Two bolts insert here
/