AZEK Trim ART10003096 Specification

Type
Specification

This manual is also suitable for

TRIM MOULDING
TRIM MOULDING
03
AZEK.com
02
We know you take great pride in your home.
We know you want nothing but the best. AZEK
Building Products are engineered to withstand
the test of time, and designed to last beautifully.
AZEK Trim and Moulding offer the highest
performing wood replacement line of PVC
products available in the market. We understand
quality, longevity and durability, so we designed
our trim and moulding products to not split,
crack or rot...allowing you to spend more time
enjoying life’s ner things instead of worrying
about maintenance.
Whether you are relaxing in your outdoor haven,
or entertaining party guests, you can rest as-
sured knowing that AZEK Building Products will
take your home to a whole new level of
elegance and sophistication.
TRIM
05
AZEK.com
04
AZEK Trim, offers an
unequaled combination
of uniformity, durability,
workability and beauty.
AZEK Trim is available in
trim, sheets, cornerboards
and beadboard, as well as
other unique trim products
that help solve common
construction challenges.
AZEK TRIM —
#1 BRAND IN TRIM
Look & Feel of Real Wood
Durable & Long Lasting
Low Maintenance
Can be Worked Similar to
Wood - Even Mitered,
Routed & Turned on a Lathe
Can be Heat Formed for
Eye-Catching Curves
25 Year Warranty
Building Code Report
(ESR-1074)
AZEK Trim...
Best-in-Class
06
Most AZEK Trim products are available in either the
Traditional or Frontier nish.
TRADITIONAL
Natural, semi-matte white surface
Available in board, cornerboard, beadboard, AZEK to Mill, sheets,
Finish Grade Trim, Universal Skirt Board, Integrated Drip Edge and Column Wrap
FRONTIER
Rustic Texture
Reversible - Traditional on one side and Frontier on the other
Available in board, cornerboard, Integrated Drip Edge, and Universal Skirt Board
07
Beauty
Semi-matte White Finish
White Color Throughout Prole
Maintains Its Color Without Protection
Readily Accepts Paints
Durability
Never Requires Paint for Protection
Will Not Rot, Cup, Split, Twist or Warp
Moisture and Insect Resistant
Suitable for Ground/Masonry Contact
25-Year Limited Warranty
Workability
Use Standard Woodworking Tools
Can be Milled, Shaped and Moulded
Can be Heat Formed for Curved Applications
Fasten Close to Edge Without Splits
Can Rout or Cut without “Chip Outs”
Uniformity
Consistent Density
Square Edges
No Waste, Every Inch Usable
AZEK.com
WHY IS AZEK TRIM
THE #1 BRAND OF TRIM?
Over 25 years of cellular pvc
manufacturing experience.
State-of-the-art manufacturing
facilities.
Condence of a Building Code
Report ESR-1074.
Maintains a “like new” appearance
even in the harshest of weather
conditions.
Made in America, AZEK Trim uses
high quality ingredients to create
boards you'll be proud to have on
your home.
5/8 x Thickness
Actual Lengths
5/8" x 3 1/2" 12' and 18'
5/8" x 5 1/2" 12' and 18'
5/8" x 7 1/4" 12' and 18'
5/8" x 9 1/4" 12' and 18'
5/8" x 11 1/4" 12' and 18'
5/8" x 15 1/4" 12' and 18'
4/4 x Thickness
Nominal Actual Lengths
1 x 2 3/4" x 1 1/2" 18'
1 x 4 3/4" x 3 1/2" 12' and 18'
1 x 5 3/4" x 4 1/2" 12' and 18'
1 x 6 3/4" x 5 1/2" 12' and 18'
1 x 8 3/4" x 7 1/4" 12' and 18'
1 x 10 3/4" x 9 1/4" 12' and 18'
1 x 12 3/4" x 11 1/4" 12' and 18'
1 x 16 3/4" x 15 1/4" 12' and 18'
5/4 x Thickness
Nominal Actual Lengths
5/4 x 4 1" x 3 1/2" 12', 18', and 20'
5/4 x 5 1" x 4 1/2" 12', 18', and 20'
5/4 x 6 1" x 5 1/2" 12', 18', and 20'
5/4 x 8 1" x 7 1/4" 12', 18', and 20'
5/4 x 10 1" x 9 1/4" 12', 18', and 20'
5/4 x 12 1" x 11 1/4" 12', 18', and 20'
5/4 x 16 1" x 15 1/4" 12', 18', and 20'
6/4 x Thickness (Frontier Only)
Nominal Actual Lengths
6/4 x 4 1 1/4" x 3 1/2" 20'
6/4 x 6 1 1/4" x 5 1/2" 20'
6/4 x 8 1 1/4" x 7 1/4" 20'
6/4 x 10 1 1/4" x 9 1/4" 20'
6/4 x 12 1 1/4" x 11 1/4" 20'
Finish Grade Trim*
Nominal Actual Lengths
6/4 x 4 1 1/4" x 4" 18'
6/4 x 6 1 1/4” x 6” 18’
3" x 3" (Miter Key Corner Reinforcement)
09
08
AZEK
Finish Grade Trim
*
(Traditional Only)
Two-piece trim system installs
quickly and easily, saving
time and labor costs while
providing a beautiful, smooth,
fastener-free trim surface. No
need to ll, paint and sand nail holes. Perfect for door
and window surrounds, but could be used in nearly any
trim application.
Base plate can be quickly and securely face nailed.
Then the cover trim ts neatly over the base trim and
includes a nailing ange to eliminate visible fasteners.
* Patent Pending
†Traditional only
Universal Skirt Board*
Nominal Actual Lengths
5/4 x 6 1" x 5 1/2" 18'
5/4 x 8 1” x 7 1/4” 18’
5/4 x 10 1” x 9 1/4” 18’
AZEK Universal
Skirt Board
*
Providing the perfect
transition between the siding
and trim, as well as assisting in
water management, the two
piece Universal Skirt Board
includes a reversible trimboard
that is routed to accept a proprietary
universal siding interface.
Unlike other skirtboards, AZEK Universal Skirt Board
will work equally well with a variety of siding products
including ber cement, vinyl, cedar shingles or wood.
The AZEK Universal Skirt Board reduces labor, saves
installation time and costs, and replaces the need for
starter strips. It is perfect for use where water tables are
not needed or desired.
1
1
2" nailing ange length
1
4" drip edge overhang
AZEK Trim
(Traditional & Frontier)
Trim that is easy to work with
and offers long lasting
durability, AZEK Trim is the
perfect replacement for wood
in all non-stress and non-load
bearing applications. It can be
easily milled, routed, and heat
formed for custom looks. AZEK Trim doesn’t require
paint for protection, but can be easily painted for
aesthetics.
25-Year
Limited Warranty
AZEK’s Warranty
Perfect for ground contact applications
Impervious to moisture and insects
Does not require paint for protection
Can be heat formed for unique designs
Building code listing ESR-1074
With the AZEK Edge
Precise, sealed edges on all 4 sides (S4S)
Stays cleaner in the lumberyard and job site
Tight board tolerances
Easier to clean if it does get dirty
With unparalleled quality, AZEK Trim products
are backed by a proven track record of
performance that tops all competitors. For a
trim product that will offer years of lasting
good looks, choose AZEK Trim.
AZEK Sheet
Actual Lengths
3/8" x 4'* 8' and 10'
1/2” x 4'* 8’ and 10’
5/8” x 4’ 8’, 10’ and 18'
3/4” x 4’ 8’, 10’, 12' and 18'
1” x 4’ 8’, 10’, 12’ and 20’
10
AZEK Sheet
(Traditional)
Perfect for bay windows,
dormers and raised panels.
Applications over 16" wide
are easy.
AZEK Adhesive
Container Size
4 oz. 32 oz.
8 oz. 128 oz.
16 oz. 5 Gal. (640 oz.)
AZEK Adhesive
Water-based, non-toxic, easy
to clean-up adhesive that is
perfect for AZEK to AZEK
adhesion. Glued joints will
never open.
* 3/8" and 1/2" sheet product is not intended to be ripped
into trim pieces. These proles must be glued to a
substrate and mechanically fastened. Contact your
AZEK Territory Sales Manager with questions.
AZEK Rabbeted
Cornerboard and Trim
(Traditional and Frontier)
With rabbeted edges, the
one-piece AZEK Rabbeted
Cornerboard is designed to ease
siding installation and deliver a
crisp, clean trim facade. AZEK
Rabbeted Trim also eases installation for a clean nish.
Rabbeted Cornerboard
Nominal Actual Lengths
5/4 x 4 1" x 3 1/2" 10' and 20'
5/4 x 6 1” x 5 1/2” 10’ and 20’
5/4 x 8 1” x 7 1/4” 10’ and 20’
(Traditional Only)
Rabbeted Trim
Nominal Actual Lengths
5/4 x 4 1” x 3 1/2” 18'
5/4 x 6 1” x 5 1/2” 18’
5/4 x 8 1” x 7 1/4” 18’
AZEK Trim and AZEK Mouldings should be installed using the same
good building principles used to install wood or composite trim and
mouldings and in accordance with the local building codes and estab-
lished installation guidelines. AZEK Building Products Inc. claims no
liability or responsibility for the improper installation of this product.
AZEK Trim and AZEK Moulding may not be suitable for every application
and it is the sole responsibility of the installer to be sure that AZEK Trim and
Mouldings are t for the intended use. Since all installations are unique, it is
also the installer’s responsibility to determine specic requirements in re-
gards to each trim application. AZEK Building Products recommends that all
applications be reviewed by a licensed architect, engineer or local building
ofcial before installation.
Technical information and AZEK Trim and Moulding Installation Guide-
lines are available online at www.AZEK.com or from your local AZEK
Dealer. If you have any questions or need assistance, please call
AZEK Customer Service at 877-ASK-AZEK (877-275-2935) or visit
www.AZEK.com.
* Patent Pending
†Traditional only
AZEK Cornerboard
(Traditional and Frontier)
With a seam that will not open,
AZEK Cornerboards offer time
savings during installation
while providing an upscale
look. Available in Traditional
and rustic Frontier in 10'
and 20' to complement any
housing exterior.
5/4 x Thickness
Nominal Actual Lengths
5/4 x 4 1" x 3 1/2" 10' and 20'
5/4 x 6 1" x 5 1/2" 10’ and 20’
6/4 x Thickness
Nominal Actual Lengths
6/4 x 4 1 1/4" x 3 1/2" 10'
6/4 x 6 1 1/4" x 5 1/2" 10'
AZEK Column Wrap
Easy to install, 3-Plus-1 column
wrap prole saves time and
installation costs. Three
connected panels and a fourth
“locking” panel t easily
around a structural support
with press t seams and nicely
nished corners. AZEK Column
Wrap is available in the Traditional nish.
Column Wrap
Nominal Actual Lengths
4 x 4 3 3/4" x 3 3/4" 10'
6 x 6 5 3/4” x 5 3/4” 10’
8 x 8 7 3/4” x 7 3/4” 10’
AZEK to Mill (ATM)
Perfect for use as a fabrication
component due to its thicker
prole. The consistent density
and solid color offer a superior
product for milling operations.
AZEK to Mill (ATM)
Actual Lengths
1 1/4" x 9 1/4" 18'
1 1/4” x 48” 8’
Beadboard
Nominal Actual Lengths
5/8 x 4 5/8" x 3 1/2" 18'
1/2 x 6 1/2” x 5 1/2” 18’
AZEK Beadboard
Reversible Beadboard prole
with edge/center bead on one
side and v-groove on the other
side. This design offers
exibility when planning your
project. Perfect for
wainscoting and porch ceiling.
1/2" Beadboard has a nailing
ange for easier installation.
AZEK Integrated
Drip Edge
*
Trim product designed to
assist with water management
efforts around window and
door surrounds. The two
piece product, which includes
a reversible trimboard, is
routed to accept a drip edge designed to help channel
water away from the window or door surround. For
easy installation, the drip edge has an integrated nailing
ange to reduce labor and installation costs.
1
1
4" nailing ange
1
8" drip edge overhang
Integrated Drip Edge*
Nominal Actual Lengths
5/4 x 4 1" x 3 1/2" 18'
5/4 x 6 1” x 5 1/2” 18’
11
All photos contained in this brochure are for display purposes only and not
for the purpose of validating the suitability or safety of any particular in-
stallation or application of the product. Always consult AZEK’s Installation
Instructions as well as local building codes to ensure proper installation.
12
MOULDING
13
AZEK.com
AZEK Mouldings are
available in many of the
most popular moulding
proles. AZEK products are
known for longevity and
durability and won’t split,
crack or rot. They can be
installed using traditional
tools and fasteners and,
for custom applications,
most AZEK Moulding prod-
ucts can be heat formed to
create eye-catching curved
moulding details.
AZEK
MOULDING —
THE PERFECT
COMPLEMENT
TO AZEK TRIM
Durable & Long Lasting
Moisture Resistant
Insect Resistant
Available in Most
Popular Proles
Low Maintenance
Perfect for Ground
Contact Applications
25 Year Warranty
Does Not Require Paint
for Protection
AZEK Moulding
14
Same color, look and feel as AZEK Trim
Crisp, authentic architectural details
Increases stability/predictability and
minimizes expansion/contraction
when fastening
No painting required, yet easy to paint if a
custom color is desired
UV protection inside and out
Uniform material minimizes chip outs on
cut lengths
One warranty covers all products
No cupping, rotting or splitting
Most can be heat formed to create curved
moulding details
Installed with similar tried-and-true installation
methods as traditional wood mouldings
Standard AZEK Installation Guidelines will
apply to AZEK Mouldings
Use AZEK Adhesive for "welding" AZEK to
AZEK surfaces and eliminate joints
15
THE AZEK DIFFERENCE...
The best looking, highest
performing wood replacement line
of mouldings available in the
market - AZEK Moulding. You will
be proud to show off your
beautifully designed space now,
and for years to come.
17
CASING PROFILES
Casing proles are decorative mouldings
typically used ush against a wall, door or
window to create surrounds.
Adams Casing
AZM-97
1
1
/
16"
3
1
/
2"
17
/
32"
Back Band
AZM-6931
3
/
4"
1
11
/
32"
1
3
/
16"
Rake Moulding
AZM-287
1
1
/
16"
2"
Brick Mould
AZM-180
1
1
/
4"
2"
Base Cap
AZM-164
1
1
/
8"
11
/
16"
Square Prole
AZM-236
1
1
/
2"
1
1
/
2"
Shingle Mould
AZM-210
11
/
16"
1
5
/
8"
Band Moulding
AZM-217
11
/
16"
1
5
/
8"
Garage Door Thermostop
AZM-6936
3
/
8"
2"
Fluted / Reeded
AZM-606
5
1
/
2"
15
/
16"
Crosshead Pediment
AZM-6216
7
1
/
8"
1
"
2
13
/
32"
Wainscot Cap
AZM-284
1"
1
/
2"
2
1
/
4"
Colonial
Base Cap
AZM-163
5
1
/
4"
3
/
4"
AZEK.com
16
CROWN PROFILES
Crown moulding proles are typically decorative
mouldings designed for use along the intersection of
a wall and ceiling. May be combined with other mould-
ings to create a “built-up” prole.
4" Crown
AZM-49
3
5
/
8"
9
/
16
"
3" Crown
AZM-52
2
3
/
4"
9
/
16
"
6" Crown
AZM-45
5
1
/
4"
11
/
16
"
5" Crown
AZM-47
4
5
/
8"
11
/
16
"
Rams Crown
AZM-6934
1
13
/
32"
2
1
/
16"
DETAIL & SILL/DRIP
PROFILES
Drip Cap is typically used as a water
table or brick ledge for separation
and water shed against two differ-
ing material types. Sill proles shed
water and offer architectural detail.
Scotia
AZM-93
3
/
4"
3
/
4"
Quarter Round
AZM-105
3
/
4"
3
/
4"
Drip Cap
AZM-197
11
/
16"
1
5
/
8"
Water Table
AZM-6935
2
3
/
4"
2"
1
3
/
4"
2
1
/
32"
Historic Sill
AZM-6930
Sub Sill Nose
AZM-6933
1
17
/
32"
1
1
/
2"
1
3
/
8"
©2013 AZEK Building Products
8" Crown
AZM-43
7
1
/
2"
1
"
3
1
/2" Bed
Moulding
AZM-28
Cove Moulding
AZM-80
4
1
/
4"
3
/
4
"
Bed Moulding
AZM-75
1
3
/
4"
1
3
/
4"
9
/
16"
3
1
/
2"
13
/
16
"
Imperial
Rake
Crown
AZM-6937
2
3
/
4"
1
3
/
8"
UNIFORMITY
Consistent Density
Square Edges
No Voids
No waste, every inch usable
Premium lengths, no upcharge
Contains no known carcinogens
DURABILITY
Never Requires Paint for Protection
Will not rot, cup, split, twist or warp
Impervious to Moisture and Insects
Suitable for Ground/Masonry Contact
25 Year Warranty
Handles easily without breakage
WORKABILITY
Use Standard Woodworking Tools
Can be Safely Milled, Shaped, and Molded*
Can be Thermoformed
Fasten Close to Edge Without Splits
Can Rout or Cut without “chip outs”
Never requires painting to retain warranty
BEAUTY
Semi-matte White Finish
White Color Throughout Prole
Maintains Original Color Without Protection
Readily Accepts Paints and Stains
Complements all Housing Exteriors
Can be crafted for unique applications
EXTRAS
Experienced “Direct” Sales Force
National PR and Ad Campaign
Dealer Referral System
Dealer Training Program
Available in Trimboards, Sheets,
Cornerboard, and Beadboard
Special solution proles available
Fiber
Cement
Trim
Poly-Ash
Trim
Vinyl/
Aluminum
Coil Wrap
Engineered/
Hardboard
Trim
AZEK
®
Trim
Wood
Trim
All products meet criteria Some products meet criteria
* Without the need for
special safety equipment.
Our Family of Products
AZEK DECK
AZEK TRIM
& MOULDING
AZEK RAIL
AZEK PORCH
AZEK PAVERS
TIMBERTECH DECK
TIMBERTECH FASTENING
TIMBERTECH LIGHTING
TIMBERTECH RAIL
18
DISCOVER THE AZEK DIFFERENCE
MAKE YOUR LASTING IMPRESSION
AZEK BUILDING PRODUCTS
WITH
AND
19
AZEK Building Products, Inc.
888 North Keyser Avenue • Scranton, PA 18504
www.AZEK.com • (877) ASK-AZEK
(877) 275-2935
Thank you for considering AZEK Trim and AZEK
Moulding. Before purchasing, please visit
www.AZEK.com for detailed installation and
product use information.
LIT-ATM 06/14
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11

AZEK Trim ART10003096 Specification

Type
Specification
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI