Toro Snow Tire Kit, GrandStand Mower Installation guide

FormNo.3437-992RevA

SnowTireKit

GrandStand

Mower

ModelNo.140-4310

InstallationInstructions

Installation

PreparingtheMachine

1.Parkthemachineonalevelsurface,disengagethePTO,andengagetheparkingbrake.

2.Shutofftheengine,removethekey,andwaitforallmovingpartstostopbeforeleavingtheoperating

position.

3.Raisetherearofthemachinesothatthewheelsareofftheground.Supportthemachineusingjack

stands.

Note:Usejackstandsratedforyourmachine.RefertotheOperator’sManualforyourmachineto

determinetheweight.

WARNING

Mechanicalorhydraulicjacksmayfailtosupportthemachineandcauseseriousinjury.

Usejackstandswhensupportingthemachine.

InstallingtheTires

1.Removethe2existingtires.

2.Installthe2snowtiresusingtheexistinglugnutsthatyouremoved.

3.Torquethelugnutsto115to142N∙m(85to105ft-lb).

4.Ensurethatairpressureinthetiresis83to97kPa(12to14psi).

Note:Dependingonconditions,loweringtirepressurecanincreasetraction.

g314322

Figure1

1.Snowtire2.Lugnut(4)

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.Toro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3437-992*A