Legrand Nuvo Control4 User guide

Brand: Legrand

Model: Nuvo Control4

Type: User guide

Integrating Player Portfolio

with

Requirements

1. Fully conﬁgured Player Portfolio

• Setup & functional via Nuvo Player app

2. Control4 Controller

• Recommend update to latest OS

3. Control4 Composer

• Recommend update to latest version

Conﬁgure Composer Project File:

1. Open Composer

2. Navigate to: System Design>Items>Search

• Select “Online/Certiﬁed Only”

• Type “nuvo” into the search parameter ﬁeld

3. Select - Any Room & Double-Click “Nuvo Virtual Matrix”

4. Navigate to: System Design>Items>Discovered

5. Launch the Nuvo Player App

• Navigate to: Settings>General>About

• Record the MAC Address of each zone

6. Select - A Speciﬁc Room to add a zone player to

7. Double-Click “Nuvo-Pxxxx” (with the MAC address for that zone)

• Rename Player & Endpoint (optional)

• Repeat steps 7 & 8 for all additional rooms/zones you wish to add

8. Navigate to: System Design>Room>Navigator>Listen>Modify

• Move ALL other zone players & endpoints to Hidden Devices

• Repeat for all additional room navigators

9. Navigate to: System Design>Room>Navigator>Watch>Modify

• Move ALL zone players & endpoints to Hidden Devices

• Repeat for all additional room navigators

10. Select - File>Refresh Navigators

v.062619

Integrating Player Portfolio

with

v.062619

Grouping:

To group zones via programming (i.e. adding a “Party” button on a UI that starts multiple zones in sync, you must ﬁrst

create a Media Scene.

Note: If a group is created from a User Interface and the “Master” zone is turned off the entire group will turn off.

Requirements:

The “Top 10” must be programmed in the Nuvo Player App

Creating a “Group” Media Scene:

1. Open Composer

2. Navigate to: Agents>Media Scenes

3. Add a Media Scene

4. [NAME] the New Scene (i.e. “Party”)

5. Select “Add Room”

6. Select the rooms you want included in the scene & click “OK”

7. Set the “Initial Volume” for each room

Activating the Media Scene [NAME] from a keypad:

1. Navigate to: Programming - Select Conﬁgurable Keypad

2. In the Programming Pane>Keypad Events>Events For: Select the button you want to program & select Single Tap

3. In the Actions Pane>Device Actions - Select the room you want to be the [MASTER]

4. In the Actions Pane>Device Actions>[MASTER] Actions>Select an Audio Device - Select he Nuvo Player for that

room from the dropdown list & Double-Click the “Action” to add it to the “Script”

5. In the Actions Pane>Device Actions>”Nuvo Player” Actions - Select Device Speciﬁc Command, Select “Slot 1-10

from the dropdown list & Double-Click the “Action” to add it to the “Script”

6. In the Actions Pane>Device Actions>Media Scenes Actions>Commands - Select Activate, Based on: [MASTER],

Media Scenes [NAME] & Double-Click the “Action” to add it to the “Script”

Deactivating the Media Scene [NAME]:

1. Navigate to: Programming - Select Conﬁgurable Keypad, Custom Buttons etc...

2. In the Programming Pane>Keypad Events>Events For: Select the button you want to program & select Double Tap

3. In the Actions Pane>Device Actions>[MASTER] Actions>Select “Commands” Pause & Double-Click the “Action” to

add it to the “Script”

4. In the Actions Pane>Device Actions>Media Scenes Actions>Commands - Select Deactivate & Double-Click the

“Action” to add it to the “Script”

Note: In the Nuvo Player App>Settings>General>Advanced you MUST turn on Auto Disband Inactive Groups & deﬁne the Auto

Disband Timeout.

Legrand Nuvo Control4 User guide

Legrand Nuvo Control4 User guide

Legrand Nuvo Control4 User guide

Related papers

Other documents