IMPORTANT:

• ALLINSTALLATIONWORKSHOULDBEDONEBYACCREDITEDPROFESSIONAL.

• SHUTOFFPOWERSUPPLYATFUSEORCIRCUITBREAKER!

• USEONLYTHESPECIFIEDBULBS.DONOTEXCEEDTHEMAXIMUMWATTAGE!

For Customer Service, contact

the place of purchase.

AssemblyInstructions:1025-BA2, BA3, BA4 (Krysta)

CLEANING TIPS

Treat the xture gently! Regular cleaning will reduce the need for deep cleaning. For regular cleaning, turn off the light and wipe down the

D

FINISHING THE INSTALLATION

3.Placethexture’sbackplate(F)overmountingstrap(B)sothatthekeyholesinthetopofmountingstrap(A)lineupwiththeholesin

backplate(B).Threadscrews(F)intotheholes.

4.Installlightbulb(J-provided)inaccordancewiththexture’sspecications.Donotexceedthemaximumrecommendedwattage.

BulbNote:Useatissueorpapertoweltoholdthebulbandpushdownintothesocket.Oilsanddirtcancausethebulblifetoshorten.

1.Takethemountingstrapassemblyfromthepartsbag.Mountingstrap(B)containsthreadedholes.Lineuptheholesin

backplate(F)withtheholesinmountingstrap(B)andsecuremountingstrap(B)tothejunctionboxwithmountingscrews(D)anda

screwdriver.Tightenthescrewssecurely.

CONNECTING THE WIRES

2.Haveanassistantsupportthexture’sweightwhilecompletingthewiring.Refertothewiringdiagrambelowandattachthexture’s

wirestothepowersupplywiresfromthejunctionbox.ConnectHottoHot,NeutraltoNeutral,andGroundtoGround.Twisttheends

ofthewirepairstogether,andthentwistonawireconnector.Makesurealltwistsareinthesamedirection.Ifthereisnohouseground

wirecomingfromthejunctionbox,locategroundscrew(E)onthemountingbracket/mountingstrapandwrapthexture’sground

wirearoundthegroundscrew.Useascrewdrivertotightenthetopofgroundscrew(E)ontothewiresandintothemountingbracket/

mountingstrap.Tuckthewiresintothejunctionbox.