Zanussi ZGG646ITN User manual

ZGG 782 CT

Gas hob

Instruction

booklet

GB

2

Thank you for selecting our applianceThank you for selecting our appliance

Thank you for selecting our appliance

We wish you lots of enjoyment with your new appliance and we hope that

you will consider our brand again when purchasing household appliances.

Please read this user manual carefully and keep it throughout the product

life cycle as a reference document. The user manual should be passed on

to any future owner of the appliance.

3

Contents

Important Safety InformationImportant Safety Information

Important Safety Information

..................................................................................................................

.........................................................

44

4

Description of the Hob .......................................................................... 6

Instructions for the UserInstructions for the User

Instructions for the User

..................................................................................................................................

.................................................................

77

7

Operation ..............................................................................................8

Maintenance and Cleaning ................................................................. 10

Something Not Working? .................................................................... 12

Guarantee/Customer Service ............................................................. 27

European Guarantee ......................................................................... 29

Instructions for the InstallerInstructions for the Installer

Instructions for the Installer

................................................................................................................

........................................................

1313

13

Engineer technical data....................................................................... 13

Important safety requirements ............................................................ 15

Installation ............................................................................................ 16

Gas Connection ...................................................................................17

Building In ............................................................................................ 18

Building over a cupboard or drawer .................................................. 18

Building over a kitchen unit with door .................................................18

Fitting the Hob into the Worktop......................................................... 19

Electrical Connections.........................................................................20

Wiring diagram ...................................................................................21

Fault Finding ........................................................................................22

Commissioning.................................................................................... 25

Conversion from Natural Gas to LPG .................................................26

Guide to Use the instructionsGuide to Use the instructions

Guide to Use the instructions

The following symbols will be found in the text to guide you throughout the Instructions:

Safety Instructions

Step by step instructions for an operation

Hints and Tips

Environmental information

)

U

MANUFACTURER:

ELECTROLUX HOME PRODUCTS ITALY S.P.A.

Viale Bologna, 298 - 47100 Forlì - Italy

4

Important Safety Information

YY

Y

ou MUST rou MUST r

ou MUST r

ead these waread these war

ead these war

nings carnings car

nings car

efully beforefully befor

efully befor

e installing ore installing or

e installing or

using the hob. If you need assistance, contact our Customerusing the hob. If you need assistance, contact our Customer

using the hob. If you need assistance, contact our Customer

Care Department on 08705 727 727.Care Department on 08705 727 727.

Care Department on 08705 727 727.

II

I

nstallationnstallation

nstallation

z This appliance must be installed and serviced by a competent person as

stated in the Gas Safety (Installation and Use) Regulations Current Editions

and the IEE Wiring Regulations.

z For appliances installed in the Republic of Ireland please refer to NSAI-

Domestic Gas Installations I.S.813 Current Editions and the ETCI Rules for

Electrical Installations.

z Remove all packaging before using the hob.

z Ensure that the gas and electrical supply complies with the type stated on

the rating plate, located near the gas supply pipe.

z Do not attempt to modify the hob in any way.

People People

People

SafetySafety

Safety

z This hob is designed to be operated by adults. Do not allow children to play

near or with the hob.

z This appliance is not intended for use by children or other persons whose

physical, sensory or mental capabilities or lack of experience and knowledge

prevents them from using the appliance safely without supervision or instruction

by a responsible person to ensure that they can use the appliance safely.

z The hob gets hot when it is in use. Children should be kept away until it has

cooled.

z Children can also injure themselves by pulling pans or pots off the hob.

During UseDuring Use

During Use

z This hob is intended for domestic cooking only. It is not designed for

commercial or industrial purposes.

z This appliance is not connected to a combustion products evacuation device.

It must be installed and connected in accordance with current installation

regulations. Particular attention shall be given to the relevant requirements

regarding ventilation.

z When in use a gas cooking hob will produce heat and moisture in the room

in which it has been installed. Ensure there is a continuous air supply, keeping

air vents in good condition or installing a cooker hood with a venting hose.

z Ensure a good ventilation around the appliance. A poor air supply could cause

lack of oxygen.

5

z Ensure the control knobs are in the ‘OFF’ position when not in use.

z When using other electrical appliances, ensure the cable does not come

into contact with the hot surfaces of the cooking appliance.

z Unstable or misshapen pans should not be used on the hob as unstable

pans can cause an accident by tipping or spillage.

z Never leave the hob unattended when cooking with oil and fats.

z Never use plastic or aluminium foil dishes on the hob.

z Perishable food, plastic items and areosols may be affected by heat and

should not be stored above or below the hob unit.

z This appliance cannot be cleaned with steam or with a steam cleaning

machine.

ServiceService

Service

z This hob should only be repaired or serviced by an authorised Service

Engineer and only genuine approved spare parts should be used.

Environmental InformationEnvironmental Information

Environmental Information

z After installation, please dispose of the packaging with due regard to

safety and the environment.

z When disposing of an old appliance, make it unusable, by cutting off the

cable.

z The symbol on the product or on its packaging indicates that this

product may not be treated as household waste. Instead it shall be handed

over to the applicable collection point for the recycling of electrical and

electronic equipment. By ensuring this product is disposed of correctly,

you will help prevent potential negative consequences for the environment

and human health, which could otherwise be caused by inappropriate

waste handling of this product. For more detailed information about

recycling of this product, please contact your local city office, your

household waste disposal service or the shop where you purchased the

product.

z When using the hob for a long period time, the ventilation should be

improved, by opening a window or increasing the extractor speed.

z Do not use this hob if it is in contact with water. Do not operate the hob with

wet hands.

Keep this instruction book for future reference and ensure it isKeep this instruction book for future reference and ensure it is

Keep this instruction book for future reference and ensure it is

passed on to any new ownerpassed on to any new owner

passed on to any new owner

..

.

These instructions are only valid for countries whose identification symbols

are shown on the cover of this instruction booklet and on the appliance itself.

U

6

Description of the Hob

1.1.

1 . Semi-rapid Burners

2.2.

2 . Triple crown Burner

3.3.

3 . Auxiliary Burner

4.4.

4 . Control knobs

2

1

3

1

4

7

INSTINST

INST

ALLAALLA

ALLA

TIONTION

TION

Any gas installation must be carried out by a registeredAny gas installation must be carried out by a registered

Any gas installation must be carried out by a registered

competent person, and in accordance with existing rulescompetent person, and in accordance with existing rules

competent person, and in accordance with existing rules

and regulations.and regulations.

and regulations.

The relevant instructions are to be found in the second section of this

manual.

Please, ensure that, once the hob is installed, it is easily accessible for

the engineer in the event of a breakdown.

WHEN THE HOB IS FIRST INSTWHEN THE HOB IS FIRST INST

WHEN THE HOB IS FIRST INST

ALLEDALLED

ALLED

Once the hob has been installed, it is important to remove any protective

materials, which were put on in the factory.

The manufacturer will not accept liability, should the above instructions or

any of the other safety instructions incorporated in this book be ignored.

Instructions for the User

8

Lighting the burnersLighting the burners

Lighting the burners

For easier lighting, proceed beforeFor easier lighting, proceed before

For easier lighting, proceed before

putting a pan on the pan support.putting a pan on the pan support.

putting a pan on the pan support.

To light a burner:

z turn the relevant knob anti-clockwise to

maximum position (

), then push it down to

ignite the burner.

z After lighting the flame, keep the knob

pushed down for about

5 seconds5 seconds

5 seconds. This

will allow the "thermocouple" (Fig.1 letter

D) to be heated and the safety device to be

switched off, otherwise the gas supply

would be interrupted.

z Then, check the flame is regular and adjust

it as required.

z To put the flame out, turn the knob to the

symbol

“ ”.

If the burner does not ignite, turn the control

knob to zero, and try again.

If you cannot light the flame even after several

attempts, check the "cap" (Fig.1- lett.

AA

A) and

the"crown" (Fig.1- lett.

BB

B) are in the correct

position.

Operation

)

Do not keep the control knob pressed for more than 15 seconds.Do not keep the control knob pressed for more than 15 seconds.

Do not keep the control knob pressed for more than 15 seconds.

If the burner does not light even after 15 seconds, release theIf the burner does not light even after 15 seconds, release the

If the burner does not light even after 15 seconds, release the

control knob, turn it the “off” position and wait for at least onecontrol knob, turn it the “off” position and wait for at least one

control knob, turn it the “off” position and wait for at least one

minute before trying to light the burner again.minute before trying to light the burner again.

minute before trying to light the burner again.

AA

A - Burner cap

BB

B - Burner crown

CC

C - Ignition electrode

DD

D - Thermocouple

A

B

C

Triple crown burner

If the burner accidentally goes out, turn the control knob to theIf the burner accidentally goes out, turn the control knob to the

If the burner accidentally goes out, turn the control knob to the

“off” position and wait for at least 1 minute before trying to light“off” position and wait for at least 1 minute before trying to light

“off” position and wait for at least 1 minute before trying to light

the burner again.the burner again.

the burner again.

When switching on the mains, after installation or a power cut, it is quite

normal for the spark generator to be activated automatically.

In the absence of electricityIn the absence of electricity

In the absence of electricity, ignition can occur without the electrical

device; in this case, approach the burner with a flame, push the relevant

knob down and turn it anti-clockwise until it reaches the maximum position.

If the control knobs become difficult to turn, please contact your local

Service Force Centre.

A

B

D

C

D

Fig. 1

9

As soon as a liquid starts boiling, turn down the

flame so that it will barely keep the liquid

simmering.

Use only pans or pots with flat bottom.Use only pans or pots with flat bottom.

Use only pans or pots with flat bottom.

If you use a saucepan which is smallerIf you use a saucepan which is smaller

If you use a saucepan which is smaller

than the recommended size, the flamethan the recommended size, the flame

than the recommended size, the flame

will spread beyond the bottom of thewill spread beyond the bottom of the

will spread beyond the bottom of the

vessel, causing the handle to overheat.vessel, causing the handle to overheat.

vessel, causing the handle to overheat.

Carefully supervise cooking with

fat or oilfat or oil

fat or oil,

since these types of foodstuff can result in a

fire, if over-heated.

The stainless steel can become tarnished if excessivelyThe stainless steel can become tarnished if excessively

The stainless steel can become tarnished if excessively

heated. Therefore prolonged cooking with potstones,heated. Therefore prolonged cooking with potstones,

heated. Therefore prolonged cooking with potstones,

earthenware pans or cast-iron plates is inadvisable. Also,earthenware pans or cast-iron plates is inadvisable. Also,

earthenware pans or cast-iron plates is inadvisable. Also,

do not use aluminium foil to protect the top during use.do not use aluminium foil to protect the top during use.

do not use aluminium foil to protect the top during use.

Make sure pots do not protrude over the edges of the cooktopMake sure pots do not protrude over the edges of the cooktop

Make sure pots do not protrude over the edges of the cooktop

and that they are centrally positioned on the rings in order toand that they are centrally positioned on the rings in order to

and that they are centrally positioned on the rings in order to

obtain lower gas consumption.obtain lower gas consumption.

obtain lower gas consumption.

Do not place unstable or deformed pots on the rings: theyDo not place unstable or deformed pots on the rings: they

Do not place unstable or deformed pots on the rings: they

could tip over or spill their contents, causing accidents.could tip over or spill their contents, causing accidents.

could tip over or spill their contents, causing accidents.

Pots must not enter the control zone.Pots must not enter the control zone.

Pots must not enter the control zone.

Using the hob correctlyUsing the hob correctly

Using the hob correctly

To ensure maximum burner efficiency, it is strongly recommended that you

use only pots and pans with a

flat flat

flat bottom fitting the size of the burner used,

so that flame will not spread beyond the bottom of the vessel (see the table).

Burner minimum maximum

diameter diameter

Triple crown 180 mm 260 mm

Medium (semi-rapid) 120 mm 220 mm

Small (auxiliary) 80 mm 160 mm

Using the Wok StandUsing the Wok Stand

Using the Wok Stand

A wok stand is provided to enable you to use a round

bottomed wok on the hob. The wok stand must only be

used on the central burner, and should not be used with any

other type of wok or pan. When fitting the wok stand, ensure

the recesses in the frame fit securely onto the bars of the

pan supports, as shown in figure.

10

Before any maintenance or cleaning can be carried out, youBefore any maintenance or cleaning can be carried out, you

Before any maintenance or cleaning can be carried out, you

must DISCONNECT the hob frmust DISCONNECT the hob fr

must DISCONNECT the hob fr

om the electricity supplyom the electricity supply

om the electricity supply

..

.

The hob is best cleaned whilst it is still warm, as spillage canThe hob is best cleaned whilst it is still warm, as spillage can

The hob is best cleaned whilst it is still warm, as spillage can

be removed more easily than if it is left to cool.be removed more easily than if it is left to cool.

be removed more easily than if it is left to cool.

This appliance cannot be cleaned with steam or with a steamThis appliance cannot be cleaned with steam or with a steam

This appliance cannot be cleaned with steam or with a steam

cleaning machine.cleaning machine.

cleaning machine.

The Hob TThe Hob T

The Hob T

opop

op

Regularly wipe over the hob top using a soft cloth well wrung out in warm water to

which a little wasing up liquid has been added. Avoid the use of the following:

- household detergent and bleaches;

- impregnated pads unsuitable for non-stick saucepans;

- steel wool pads;

- bath/sink stain removers.

Should the hob top become heavily soiled, the following products are

recommended:

- For stainless steel hobs use a proprietary stainless steel cleaner.

- For other hobs use Hob Brite or Bar Keepers Friend.

Do not leave acid or alkaline substances (e.g. vinegarDo not leave acid or alkaline substances (e.g. vinegar

Do not leave acid or alkaline substances (e.g. vinegar

, salt,, salt,

, salt,

lemon juice, etc.) on the cooktop.lemon juice, etc.) on the cooktop.

lemon juice, etc.) on the cooktop.

If scratches or cracks are noticed on the glass top,If scratches or cracks are noticed on the glass top,

If scratches or cracks are noticed on the glass top,

immediately disconnect the appliance from the electricalimmediately disconnect the appliance from the electrical

immediately disconnect the appliance from the electrical

supplysupply

supply

, contact your local Service For, contact your local Service For

, contact your local Service For

ce Centrce Centr

ce Centr

e and avoide and avoid

e and avoid

using the appliance until it has been repaired.using the appliance until it has been repaired.

using the appliance until it has been repaired.

The The

The

Pan SupportsPan Supports

Pan Supports

If necessary remove stubborn stains using a paste cleaner.

Never use steel wool pads or acids.

After cleaning, make sure that the pan supports are correctly positioned.

Pay attention when replacing the pan supports in order toPay attention when replacing the pan supports in order to

Pay attention when replacing the pan supports in order to

avoid damaging the hob top.avoid damaging the hob top.

avoid damaging the hob top.

Maintenance and Cleaning

11

The BurnersThe Burners

The Burners

The burner caps and crowns can be removed for cleaning.

Wash the burners caps and crowns using hot soapy water, and remove

marks with a mild paste cleaner. A well moistened soap impregnated steel

wool pad can be used with caution, if the marks are particularly difficult to

remove.

After cleaning, be sure to wipe dry with a soft

cloth.

Frequently wash the "caps" and the "crowns"

with hot soapy water, carefully taking away

any built-up of food.

The cap and the crown of each burner are

secured with two screws. To separate the two

pieces, lift the cap, turn it upside down, then

undo the two fixing screws as shown in Fig. 2.

After a thorough cleaning, reassemble the two

parts and refit the cap in its correct position

on the burner.

The Ignition electrodeThe Ignition electrode

The Ignition electrode

The electric ignition is obtained through a ceramic "candle" and a metal

electrode (Fig.1 - lett. C). Keep these components well clean, to avoid

difficult lighting, and check that the burner crown holes (Fig.1 - lett. B) are

not obstructed.

FO 2265

Fig. 2

12

Something Not Working?

If the hob is not working correctly, please carry out the following checks

before contacting your local Service Force Centre.

SYMPTOM SYMPTOM

SYMPTOM

 There is no spark when

lighting the gas.

 The gas ring burns unevenly.

SOLUTIONSOLUTION

SOLUTION

 Check that the unit is plugged

in and the electrical supply is

switched on.

 Check that the RCCB has not

tripped (if fitted).

 Check the mains fuse has not

blown.

 Check the burner cap and

crown have been replaced

correctly, e.g. after cleaning.

 Check the main jet is not

blocked and the burner crown

is clear of food particles.

 Check the burner cap and

crown have been replaced

correctly, e.g. after cleaning.

If after all these checks, your hob still does not operate correctly, contact

your local Service Force Centre.

Please note that it will be necessary to provide proof of purchase for any in-

guarantee service calls.

In-guarantee customers should ensure that the above checks have been

made as the engineer will make a charge if the fault is not a mechanical or

electrical breakdown.

13

OVERALL DIMENSIONSOVERALL DIMENSIONS

OVERALL DIMENSIONS Width: 685 mm

Depth: 515 mm

CUT OUT DIMENSIONSCUT OUT DIMENSIONS

CUT OUT DIMENSIONS Width: 560 mm

Depth: 480 mm

SUPPLSUPPL

SUPPL

Y CONNECTIONSY CONNECTIONS

Y CONNECTIONS

Gas:Gas:

Gas:

R 1/2 inch (1/2 inch male) Rear right hand corner

Electric:Electric:

Electric:

230 V~ 50 Hz supply, 3 core flexible cable with

non rewireable plug fitted with a 3 amp cartridge fuse

HEAHEA

HEA

T INPUTT INPUT

T INPUT

Rear Left BurnerRear Left Burner

Rear Left Burner 2.0 kW (6826 BTU/HR)

(semi-rapid)(semi-rapid)

(semi-rapid)

Front Left BurnerFront Left Burner

Front Left Burner 2.0 kW (6826 BTU/HR)

(semi-rapid)(semi-rapid)

(semi-rapid)

Central BurnerCentral Burner

Central Burner 4.0 kW (13652 BTU/HR)

(triple crown)(triple crown)

(triple crown)

Rear Right BurnerRear Right Burner

Rear Right Burner 2.0 kW (6826 BTU/HR)

(semi-rapid)(semi-rapid)

(semi-rapid)

Front Right BurnerFront Right Burner

Front Right Burner 1.0 kW (3413 BTU/HR)

(auxiliary)(auxiliary)

(auxiliary)

APPLIANCE CLASSAPPLIANCE CLASS

APPLIANCE CLASS 3

APPLIANCE CAAPPLIANCE CA

APPLIANCE CA

TEGORTEGOR

TEGOR

YY

Y II2H3+

GAS SUPPLGAS SUPPL

GAS SUPPL

YY

Y Natural gas G20 (2H) 20 mbar

Instructions for the Installer

Engineer technical dataEngineer technical data

Engineer technical data

This appliance is manufactured according to the following EEC

directives:

2006/95 EEC - 93/68 EEC - 89/336 EEC - 90/396 EEC, current

edition.

14

BURNER Dia. Tap By-pass

1/100 mm

Auxiliary 28

Semi-rapid 32

Triple Crown 56

Aeration adjustment none

NORMAL REDUCED

NORMAL

POWER POWER

POWER

BURNER NATURAL GAS LPG

G20 (2H) - 20 mbar

(Butane/Propane) 30 mbar

kW kW g/h

inj. m

3

/h inj.

G30 G31

100/mm 100/mm

Auxiliary

burner 1,0 0,33 70 0,095 50 73 71

Semi-rapid

burner 1,9 0,45 96 0,181 71 138 136

Triple Crown

burner 3,8 1,20 146 0,362 98 276 271

15

Important safety requirements

This hob must be installed in accordance with the Gas Safety (Installation and Use)

Regulations (Current Edition) and the IEE Wiring Regulations (Current Edition).

For appliances installed in the Republic of Ireland please refer to NSAI- Domestic

Gas Installation I.S. 813 Current Editions and the ETCI Rules for Electrical Installations.

PrPr

Pr

ovision for Vovision for V

ovision for V

entilationentilation

entilation

Detailed recommendations are contained in the following British Standards Codes Of

Practice: B.S. 6172/ B.S. 5440, Par. 2 and B.S. 6891 Current Editions.

The hob should not be installed in a bed sitting room with a volume of less than 20 m

3

.

If it is installed in a room of volume less than 5 m

3

an air vent of effective area of 100

cm

2

is required. If it is installed in a room of volume between 5 m

3

and 10 m

3

an air vent

of effective area of 50 cm

2

is required, while if the volume exceeds 11 m

3

no air vent is

required.

However, if the room has a door which opens directly to the outside no air vent is

required even if the volume is between 5 m

3

and 11 m

3

.

If there are other fuel burning appliances in the same room, B.S. 5440 Part 2 Current

Edition, should be consulted to determine the requisite air vent requirements.

For appliances installed in the Republic of Ireland please refer to the NSAI- Domestic

Gas Installation I.S. 813 Current Editions Table Four.

LocationLocation

Location

The hob may be located in a kitchen, a

kitchen/diner or bed sitting room, but not

in a bathroom or shower room.

Ensure that there is a minimum distance

of 55 mm between the rear cut out edge

and the wall.

A minimum distance of 150 mm must be

left between the side edges of the cut out

and any adjacent cabinets or walls.

The minimum distance combustible

material can be fitted above the hob in

line with the edges of the hob is 400 mm

If it is fitted below 400 mm a space of 50

mm must be allowed from the edges of

the hob.

600 M

IN

.

Fig. 3

16

Installation

IMPORIMPOR

IMPOR

TT

T

ANTANT

ANT

This hob must be installed by a competent person to theThis hob must be installed by a competent person to the

This hob must be installed by a competent person to the

relevant Gas Standards.relevant Gas Standards.

relevant Gas Standards.

Any gas installation must be carried out by a registeredAny gas installation must be carried out by a registered

Any gas installation must be carried out by a registered

competent person.competent person.

competent person.

Please, ensure that, once the hob is installed, it is easily accessible for the

engineer in the event of a breakdown.

The manufacturer will not accept liability, should the above instructions or

any of the other safety instructions incorporated in this instruction booklet

be ignored.

The minimum distance combustible material or a cooker hood can be fitted above the

hob is 650 mm.

For appliances installed in the Republic of Ireland please refer to NSAI- Domestic

Gas Installation I.S 813 Current Edition Section 7- Permitted Locations of Appliance.

17

A) End of shaft with nut

B) Washer

C) Elbow

It is important to install the elbow corrIt is important to install the elbow corr

It is important to install the elbow corr

ectlyectly

ectly

, with the shoulder on, with the shoulder on

, with the shoulder on

the end of the thread, fitted to the hob connecting pipe.the end of the thread, fitted to the hob connecting pipe.

the end of the thread, fitted to the hob connecting pipe.

Failure to ensure the correct assembly will cause leakage of gas.Failure to ensure the correct assembly will cause leakage of gas.

Failure to ensure the correct assembly will cause leakage of gas.

Gas ConnectionGas Connection

Gas Connection

Connection to the gas supply should be with either rigid or semi-rigid pipe, i.e.

steel or copper.

The connection should be suitable for connecting to R 1/2 (1/2 BSP male thread).

When the final connection has been made, it is essential that a thorough leak test

is carried out on the hob and installation.

Ensure that the main connection pipe does not exert any strain on the hob.

On the end of the shaft, which includes the G 1/2" threaded elbow, adjustment

is fixed so that the washer is fitted between the components as shown in the

diagram. Screw the parts together without using excessive force.

18

2

BB

B

uilding over a kitchen unituilding over a kitchen unit

uilding over a kitchen unit

with doorwith door

with door

Proper arrangements must be taken in designing

the furniture unit, in order to avoid any contact

with the bottom of the hob which can be heated

when it is operated. The recommended solution

is shown in diagram 3.

The panel fitted under the hob ("a") should be

easily removable to allow easy access if

technical assistance is needed. The space

behind the kitchen unit ("b") can be used for

connections.

Dimensions are given in mm.

3

BB

B

uilding over a cupboard or draweruilding over a cupboard or drawer

uilding over a cupboard or drawer

If the hob is to be installed above a cupboard or drawer it will be necessary to fit a

heat resistant board below the base of the hob on the underside of the work surface.

It is also recommended to carry out the electrical connection to the hob as shown

in diagrams 1 and 2.

Building In

1

19

Fitting the Hob into the Worktop

Before fitting the hob into the cut out,

an adhesive seal must be fitted to the

underside outside edge of the hob.

It is essential that no gaps are left in

this seal in order to prevent spillage near

the hob seeping into the cabinet below.

1) Remove the pan supports, the burners

caps and crowns and turn the hob

upside down, taking care the ignition

candles are not damaged in this

operation.

2) Place the sealing gasket all around the

glass top edge as shown in Fig. 4.

3) Place the hob in the cut out, taking

care of its centring.

4) Fix the hob with the relevant fixing

clamps and screws(see Fig. 5). When

the screws have been tightened, the

excess seal can be removed.

sealing gasket

FO 2321

Fig. 5

FO 2320

Fig. 4

20

Electrical Connections

Any electrical work required to install this hob should beAny electrical work required to install this hob should be

Any electrical work required to install this hob should be

carried out by a qualified electrician or competent person,carried out by a qualified electrician or competent person,

carried out by a qualified electrician or competent person,

in accordance with the current regulations.in accordance with the current regulations.

in accordance with the current regulations.

THIS HOB MUST BE EARTHED.THIS HOB MUST BE EARTHED.

THIS HOB MUST BE EARTHED.

Electrical RequirementsElectrical Requirements

Electrical Requirements

Any permanent electrical installation must comply with the latest I.E.E.

Regulations and local Electricity Board regulations. For your own safety

this should be undertaken by a qualified electrician, e.g. your local Electricity

Board, or a contractor who is on the roll of the National Inspection Council

for Electrical Installation Contracting (NICEIC).

The manufacturer declines any liability should these safety

measures not be observed.

This hob is designed to be connected to a 230 V 50 Hz AC electrical supply.

Before switching on, make sure the electricity supply voltage is the same

as that indicated on the hob rating plate. The rating plate is located on the

bottom of the hob. A copy is attached on

the back cover of this book.

The hob is supplied with a 3 core flexible

supply cord incorporating a 3 amp plug

fitted. In the event of having to change the

fuse, a 3 amp ASTA approved (BS 1362)

fuse must be used.

Should the plug need to be replaced for

any reason, the wires in the mains lead are

coloured in accordance with the following

code:

Green and Yellow - Earth

Blue - Neutral

Brown - Live

1) Connect the green and yellow (earth) wire to the terminal in the

plug which is marked with the letter 'E' or the earth symbol

or coloured green and yellow.

2) Connect the blue (neutral) wire to the terminal in the plug which

is marked with the letter 'N' or coloured black.

FO 0390

)

Page is loading ...

Zanussi ZGG646ITN User manual

Related papers

Other documents