Trendnet TI-F11SFP Quick Installation Guide

TI-F11SFP
Trendnet
Brand
Trendnet
Model
TI-F11SFP
Category
Network transceiver modules
Type
Quick Installation Guide

This manual is also suitable for

Trendnet TI-F11SFP is a media converter that can be used to connect a network device to a fiber optic cable. It supports both 10/100Mbps and 1000Mbps speeds and can be used with either SFP or GBIC modules. The TI-F11SFP can be mounted on a wall, set on a desk, or attached to a DIN rail, making it versatile for a variety of installation scenarios. Additionally, it features DIP switches that allow for configuration of speed, SFP mode, and Link Fault Pass Through (LFP).

Trendnet TI-F11SFP is a media converter that can be used to connect a network device to a fiber optic cable. It supports both 10/100Mbps and 1000Mbps speeds and can be used with either SFP or GBIC modules. The TI-F11SFP can be mounted on a wall, set on a desk, or attached to a DIN rail, making it versatile for a variety of installation scenarios. Additionally, it features DIP switches that allow for configuration of speed, SFP mode, and Link Fault Pass Through (LFP).

TI-F11SFP
Quick Installation Guide
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
PORTUGUÊS
1. Interruptor DIP
Ligado: 100M
Desligado: 1000M
Velocidade
Ligado: Desligado
Desligado: Auto
SFP
Modo switch / Conversor
LFP (Link Fault Pass through)
Ligado: Con.
Desligado: SW
Ligado: LFP
Desligado: Desligado
5
4. Informação adicional
1
2
DESLIGADO
3
4
LIGADO
Page is loading ...
Certifications
This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful
interference.
(2) This device must accept any
interference received. Including
interference that may cause undesired
operation.
Waste electrical an electronic products
must not be disposed of with household
waste. Please recycle where facilities
exist. Check with your Local Authority or
Retailer for recycling advice.
TRENDnet
20675 Manhattan Place, Torrance, CA 90501. USA
Copyright © 2015. All Rights Reserved. TRENDnet.
TI-F11SFP (V1) /08.12.2015
Note
The Manufacturer is not responsible for any
radio or TV interference caused by
unauthorized modifications to this equipment.
Such modifications could void the user’s
authority to operate the equipment.
Advertencia
En todos nuestros equipos se mencionan
claramente las caracteristicas del adaptador de
alimentacón necesario para su funcionamiento.
El uso de un adaptador distinto al mencionado
puede producir daños fisicos y/o daños al
equipo conectado. El adaptador de
alimentación debe operar con voltaje y
frecuencia de la energia electrica domiciliaria
exitente en el pais o zona de instalación.
Applies to PoE Products Only: This product is
to be connected only to PoE networks without
routing to the outside plant.
Product Warranty Registration
Please take a moment to register your
product online. Go to TRENDnet’s website at:
http://www.trendnet.com/register
Technical Support
If you have any questions regarding the product
installation, please contact our Technical Support.
Toll free US/Canada: 1-866-845-3673
Regional phone numbers available
at www.trendnet.com/support
Обмежена гарантія
TRENDnet надає гарантію на свою продукцію щодо відсутності дефектів матеріалів та
роботи за умови її належного використання та обслуговування. Конкретні гарантійні
періоди перелічені на сторінці кожного виробу на сайті компанії TRENDnet.
TI-F11SFP
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Trendnet TI-F11SFP Quick Installation Guide

TI-F11SFP
Trendnet
Brand
Trendnet
Model
TI-F11SFP
Category
Network transceiver modules
Type
Quick Installation Guide
This manual is also suitable for

Trendnet TI-F11SFP is a media converter that can be used to connect a network device to a fiber optic cable. It supports both 10/100Mbps and 1000Mbps speeds and can be used with either SFP or GBIC modules. The TI-F11SFP can be mounted on a wall, set on a desk, or attached to a DIN rail, making it versatile for a variety of installation scenarios. Additionally, it features DIP switches that allow for configuration of speed, SFP mode, and Link Fault Pass Through (LFP).

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents