Akai AK24FLEDG User manual

Brand: Akai

Model: AK24FLEDG

Category: LCD TVs

Type: User manual

This manual is also suitable for

AK22FLEDCG

21.5” (54.6cm) FHD LED LCD TV

with Built-in DVD Player

AK22FLEDCG

Instruction Manual

AFTER SALES SUPPORT

NZ: 0800 883 301

N13275

Contents

Important Safety Instructions 4

Usage conditions and restrictions 4

Electrical safety, power cord and plug 5

Position 5

Cleaning and maintenance 5

Assembly 7

Mounting Instructions 8

Connections and Functions 9

Remote Control 15

Installing the Batteries 17

Remote Control Operation 17

First Time Installation 18

Selecting an Input Source 19

Menu Operation in DTV Mode 20

Channel Menu 20

Picture Mode 24

Sound Mode 25

Time Settings 26

Lock Menu 27

Hotel Mode 28

Setup 29

Menu Operation in PC Mode 30

Menu Operation in Other Mode 31

PVR and Time Shift Operation 32

Media (Multimedia) Playback 36

Photo Menu 37

Music Menu 38

Movie Menu 39

Text Menu 40

EPG (Electronic Program Guide) 42

Built-in DVD Player Operation 43

Contents

Specications 49

Care and Maintenance 50

Responsible Disposal 50

FAQs 51

Important Safety Instructions

Read this manual thoroughly before rst use and keep it in a safe place for future reference,

along with the warranty card, purchase receipt and carton. The safety precautions enclosed

herein reduce the risk of re, electric shock and injury when correctly adhered to.

Usage conditions and restrictions

To prevent any injuries, the following safety precautions should be observed in the

installation, use, servicing and maintenance of equipment. Before operating this equipment,

please read this manual completely, and keep it nearby for future reference.

• Take notice of all the warnings.

• Do not use this TV near water.

• Clean only with a dry cloth.

• Do not block any of the ventilation openings.

• Install in accordance with the manufacturer’s instructions.

• Do not install near any heat sources such as radiators, heat registers, stoves, or other TV’s

(including ampliers) that produce heat.

• Do not alter the grounding type plug provided with the TV. A grounding type plug has two

blades and a third grounding prong. The third prong is provided for your safety. When the

provided plug does not t into your outlet, consult an electrician for replacement of the

obsolete outlet.

• Protect the power cord from being walked on or pinched particularly at plugs, convenience

receptacles, and the point where they exit from the TV.

• Only use the attachments/accessories specied by the manufacturer.

• Use only with a cart, stand, tripod, bracket, or table specied by the manufacturer, or sold

with the TV.

• Unplug this TV during lightning storms or when unused for long periods of time.

• The appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the appliance by a person responsible

for their safety.

• Young children should be supervised to ensure they do not play with the appliance.

• Refer all servicing to qualied service personnel. Servicing is required when the TV has been

damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled

or objects have fallen into the TV, the TV has been exposed to rain or moisture, does not

operate normally, or has been dropped.

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or

similarly qualied persons in order to avoid a hazard.

NOTE: The TV must not be exposed to dripping or splashing and no objects lled with

liquids, such as vases, shall be placed on the TV.

Important Safety Instructions (Cont.)

Position

• If a television is not positioned in a suciently stable location, it can be potentially

hazardous due to falling. Many injuries, particularly to children, can be avoided by taking

simple precautions such as:

• Securely attaching the TV to the wall mount fastened on the wall.

• Only using furniture that can safely support the television.

• Ensuring the television is not overhanging the edge of the supporting furniture.

• Educating children about the dangers of climbing on furniture to reach the TV controls.

• Not standing the TV on cloth or other materials placed between the television and

supporting furniture.

• Not placing the television on tall furniture (for example, cupboards or bookcases)

without anchoring both the furniture and the television to a suitable support.

• When deciding on where to put the TV set, make sure the place is:

• Well ventilated.

• Away from damp and cold.

• Protected from overheating and away from direct sunlight.

• Away from moisture drips or splashes.

• Protected from excessive dust.

• Do not install this equipment in a conned space such as a bookcase or similar unit.

• Do not put any objects lled with liquids, such as vases, on top of the TV set.

• Do not place any naked ame sources, such as lighted candles, on top of the TV set.

Cleaning and maintenance

• Dust the TV set by wiping the screen and cabinet with a soft, clean cloth.

Electrical safety, power cord and plug

• Before installing this TV set, make sure your outlet voltage corresponds to the voltage

stated on the appliance rating label.

• To reduce the risk of re or electric shock, do not expose this appliance to rain or moisture.

• Do not overload the power cord or power outlet.

• Do not let the cord hang over the edge of a table or counter, or touch any hot surface.

• Do not allow anything to rest on or roll over the power cord and signal cable.

• Protect the power cord and signal cable from being trampled.

• Do not expose the power cord and signal cable to moisture.

Important Safety Instructions (Cont.)

• Do not apply excessive force to the screen when cleaning.

• Do not clean the screen with water or chemical cleaners as this may damage the LED

screen surface.

• Do not dismantle this product by yourself, as this may cause damage. There are no user-

serviceable parts contained in the TV set.

• If your TV set has been damaged, contact the after sales support line for advice or take

it to a local service centre or for inspection or repair. No liability can be accepted for any

damage caused by non-compliance with these instructions or any other improper use or

mishandling of appliance.

TV with Class 1 construction shall be connected to a main socket outlet with a protective

earthing connection.

WARNING:

TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR AN ELECTRIC SHOCK HAZARD, DO

NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTIONS: • These servicing instructions are for use by qualied service personnel only. To

reduce the risk of electric shock, do not perform any servicing other than that

contained in the operating instructions unless you are qualied to do so.

• Any changes or modications not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equipment.

This symbol indicates that dangerous voltage constituting a risk of

electric shock is present within this unit.

This symbol indicates that there are important operating and

maintenance instructions in the documentation accompanying this unit.

CAUTION: TO PREVENT THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

Contents of carton:

1 x TV Set 1 x Instruction Manual 1 x Stand Base

1 x Remote Control 2 x AAA Batteries 2 x Screws (for stand)

1 x AC Adaptor

Assemble the stand

Your TV is packaged with the stand and the cabinet

separately. Before enjoying your TV, please take out

the stand and follow instructions below to assemble

the TV.

Step1

Place the TV faced down on a soft cloth or

cushion to prevent the panel from being

damaged.

Step2

Align the screw holds on the stand with the TV

bottom. Push the stand until the TV is fully seated

on the stand.

Note: Make sure the orientation of trapezoid head

on the stand is corresponding to the trapezoid

slot on the TV bottom.

Step3

Tighten the included screws with a screw drive.

Notes:

• Unplug the power adaptor rst when

installing or removing the TV stand.

• To avoid any damage to the TV, ask one or

more people for assistance when installing

or removing the TV stand.

Assembly

Contents of carton:

1 x TV Set 1 x Instruction manual 1 x Stand base

1 x Remote control 2 x AAA batteries 2 x Screws (for stand)

1 x AC Adaptor

Assemble the stand

Step 1

Place the TV faced down on a soft cloth or cushion to

prevent the panel from being damaged.

Step 2

Align the screw holes on stand and TV bottom and

then push the stand until the TV is fully seated on

the stand.

NOTE: Make sure the orientation of trapezoid head

on stand is corresponding to the trapezoid slot on TV

bottom.

Step 3

Tighten the included screws with a screw driver.

NOTES:

- Unplug the power adaptor first when installing or

removing the TV Stand.

- To avoid any damage to this TV, contact one or

more partner for assistance when installing or

removing the TV stand.

Press

Mounting Instructions

Notes:

• Contact a professional for assistance when wall mounting your TV. We are not responsible for

any damage to the product or injury to yourself, if you mount the TV on your own.

• Do not wall mount the TV while TV is turned on. It may cause personal injury due to electric

shock. Always unplug and disconnect the power source before mounting your TV.

• Use standard M4*10mm screws (4 pieces) to mount this TV.

Wall Mounting

This television set is equipped with holes on the back panel for use with wall mounting

baskets (not included). Please use the image below as a reference when buying wall

mounting baskets.

NOTE: The distance between the holes is 100 x 100mm in width and height.

Note: The screws in the package are for securing the TV stand only. If you are wall mounting the TV,

consult a qualied installer for further instructions on brackets support and wall support.

Assembly (Cont.)

Wall mounting

This television set is equipped with holes on the back panel for use with wall-mounting

brackets (not included). Please use the image below as a reference when buying

wall-mounting brackets.

NOTE: The distance between the holes is 100 x 100mm in width and height.

For wall-mounting, remove all three screws

to remove the entire stand assembly.

NOTE: The screws in the package are for securing the TV stand only. If you are

wall-mounting the TV, consult a qualified installer for further instructions on bracket

support and wall support.

For wall mounting, remove all three screws

to remove the entire stand assembly.

Connections and Functions

1. LED display screen.

2. Power indicator - In standby mode the

indicator light is red. When the TV is

switched on, the indicator light shows blue.

3. Remote control sensor.

4. Stand holder.

5. Disc Slot - To insert a disc according to the

silkscreen on the side of the slot.

6. - To play or pause playing (DVD)

7. - To open or close the disc compartment.

8. VOLUME +/- button - To increase/decrease

the volume level or move left/right.

9. CHANNEL +/- button - To select next/

previous channel or move up/down.

10. MENU button - To enter menu setting page.

11. SOURCE button - To select the input source.

12. POWER button - To turn the TV On/O.

Controls and Connections

1. LED display screen

2. Power indicator- In standby mode the

indicator shows red; when switching on

the unit the indicator shows blue.

3. Remote control sensor

4. Stand holder

5. Disc slot- To insert a disc according to

the silk screen on the side of this slot.

6. - To play or pause playing (DVD).

7. - To open or close the disc

compartment.

8. VOLUME +/- button- To

increase/decrease the volume level or

move left/right.

9. CHANNEL +/- button- To select

next/previous channel or move

up/down.

10. MENU button- To enter menu setting

page.

11. SOURCE button- To select the input

source.

12. POWER button- To turn the TV ON/OFF.

Back

View

Front

View

Side

View

Controls and Connections

1. LED display screen

2. Power indicator- In standby mode the

indicator shows red; when switching on

the unit the indicator shows blue.

3. Remote control sensor

4. Stand holder

5. Disc slot- To insert a disc according to

the silk screen on the side of this slot.

6. - To play or pause playing (DVD).

7. - To open or close the disc

compartment.

8. VOLUME +/- button- To

increase/decrease the volume level or

move left/right.

9. CHANNEL +/- button- To select

next/previous channel or move

up/down.

10. MENU button- To enter menu setting

page.

11. SOURCE button- To select the input

source.

12. POWER button- To turn the TV ON/OFF.

Back

View

Front

View

Side

View

1. Power Input: Connect the included power adaptor.

2. HDMI 1: Connect the HDMI output jack of DVD.

3. PC AUDIO: Connect the audio output jack of PC.

4. VGA: Connect the PC-RGB output jack of PC.

5. YPbPr (Component): Connect the YPbPr output jack of DVD

6. CVBS: Connect the Video output jack of DVD.

7. R/L: Connect the R/L audio output jack of DVD.

8. COAXIAL: Connect the SPDIF receiver.

9. RF: Connection the antenna

10. HDMI 2: Connect the HDMI output jack of DVD.

11. USB: Connect to portable USB storage device.

12. Earphone: Connect the earphone.

13. Built-in Speaker.

Controls and Connections (Cont.)

1. Power input: Connect the included power adaptor.

2. HDMI 1: Connect the HDMI output jack of DVD

3. PC AUDIO: Connect the Audio output jack of PC.

4. VGA: Connect the PC-RGB output jack of PC.

5. YPbPr (Componnet): Connect the YPbPr output jacks of DVD.

6. CVBS: Connect the Video output jack of DVD.

7. R/L: Connect the R/L audio output jack of DVD.

8. COAXIAL: Connect the SPDIF receiver.

9. RF: Connect the antenna.

10. HDMI 2: Connect the HDMI output jack of DVD.

11. USB: Connect the portable USB device.

12. EARPHONE: Connect the earphone.

13. Built-in Speakers

Back

View

Connections and Function (Cont.)

Connections and Functions (Cont.)

Power Cord Connection

- Connect the power cord correctly as shown.

- Press the POWER switch of your TV to switch the unit on. The power indicator on the front

panel lights up in blue.

Antennas Connection

To ensure good picture and sound, a TV antenna system needs to be installed. The antenna

system as shown can be sourced from TV equipment stores, which will provide service for

correct installation and connections. After installation, insert the 75-OHM antenna plug into

the antenna socket as shown.

Basic Installation

Power Connection

● Connect the power adaptor to power outlet correctly as shown below.

● Press the POWER switch on your TV or Remote Control to switch the unit on. The power

indicator on the front panel lights up in blue.

Antenna Connection

To ensure good picture and sound, a TV antenna system needs to be connected. The antenna

system as shown can be sourced from TV equipment stores, which will provide service for the

correct installation and connection. After installation, insert the 75-OHM antenna plug into the

antenna jack (RF) as shown below.

To power outlet

Basic Installation

Power Connection

● Connect the power adaptor to power outlet correctly as shown below.

● Press the POWER switch on your TV or Remote Control to switch the unit on. The power

indicator on the front panel lights up in blue.

Antenna Connection

To ensure good picture and sound, a TV antenna system needs to be connected. The antenna

system as shown can be sourced from TV equipment stores, which will provide service for the

correct installation and connection. After installation, insert the 75-OHM antenna plug into the

antenna jack (RF) as shown below.

To power outlet

Connections and Functions (Cont.)

Component (YPbPr) Connection

Connect the YPbPr output of the DVD or VCR to the YPbPr input on the set. The picture

quality is improved compared to connecting a regular VCR to the AC input. Connect the

Audio output of the DVD or VCR to the Audio input jacks on the set using the RCA cable.

Match the jacks colours: Y is green, Pb is blue, Pr is red. Audio left is white and Audio right in

red. Select Component input source using the SOURCE button on the remote control.

AV (CVBS) Connection

Connect the VIDEO and AUDIO output jack of the DVD or VCR to the AV IN jacks on the set

using the AV cable (Yellow [video], White and Red [left and right audio]). Select the AV input

source using the SOURCE button on the remote control.

Basic Installation (Cont.)

AV (CVBS) Connection

Connect the VIDEO and AUDIO output jack of the DVD or VCR to the AV IN jacks in the set using an

AV Cable (Yellow [video], White and Red [left & right audio]). Select the AV input source using the

SOURCE button on the remote control.

Component (YPbPr) Connection

Connect the YPbPr output of the DVD or VCR to the YPbPr input on the set. The picture quality is

improved compared to connecting a regular VCR to the AV input. Connect the Audio output of the

DVD or VCR to the Audio input jacks on the set using the RCA cable. Match the jack colours: Y is

green, Pb is blue, Pr is red, Audio left is white and Audio right is red, Select Component input

source using the SOURCE button on the remote control.

AV cable

(Not included)

YPbPr cable

(Not included)

AUDIO cable

(Not included)

Basic Installation (Cont.)

AV (CVBS) Connection

Connect the VIDEO and AUDIO output jack of the DVD or VCR to the AV IN jacks in the set using an

AV Cable (Yellow [video], White and Red [left & right audio]). Select the AV input source using the

SOURCE button on the remote control.

Component (YPbPr) Connection

Connect the YPbPr output of the DVD or VCR to the YPbPr input on the set. The picture quality is

improved compared to connecting a regular VCR to the AV input. Connect the Audio output of the

DVD or VCR to the Audio input jacks on the set using the RCA cable. Match the jack colours: Y is

green, Pb is blue, Pr is red, Audio left is white and Audio right is red, Select Component input

source using the SOURCE button on the remote control.

AV cable

(Not included)

YPbPr cable

(Not included)

AUDIO cable

(Not included)

Connections and Functions (Cont.)

VGA (PC) Connection

Connect the RGB output of the PC to the VGA jack on the set. Connect the AUDIO output of

the PC to the PC AUDIO jack on the set. Select the PC input source using the SOURCE button

the remote control.

HDMI Connection

HDMI is a digital connection for sending both Video and Sound signals through one cable.

HDMI supports 1080P video and multi channel digital audio. Connect HDMI output of DVD

or VCR to HDMI jack. Select related HDMI input source using the SOURCE button on the

remote control.

Basic Installation (Cont.)

VGA (PC) Connection

Connect the VGA output of the PC to the VGA jack on the set. Connect the AUDIO output of the PC

to the PC AUDIO jack on the set. Select the PC input source using the SOURCE button on the

remote control.

HDMI Connection

HDMI is a digital connection for sending both Video & Sound signals through the one cable. HDMI

supports 1080p Video and Multi-channel Digital Audio. Connect HDMI out of DVD or VCR to HDMI

jack. Select related HDMI input source using the SOURCE button on the remote control.

AUDIO cable

(Not included)

VGA cable

(Not included)

HDMI cable

(Not included)

Basic Installation (Cont.)

VGA (PC) Connection

Connect the VGA output of the PC to the VGA jack on the set. Connect the AUDIO output of the PC

to the PC AUDIO jack on the set. Select the PC input source using the SOURCE button on the

remote control.

HDMI Connection

HDMI is a digital connection for sending both Video & Sound signals through the one cable. HDMI

supports 1080p Video and Multi-channel Digital Audio. Connect HDMI out of DVD or VCR to HDMI

jack. Select related HDMI input source using the SOURCE button on the remote control.

AUDIO cable

(Not included)

VGA cable

(Not included)

HDMI cable

(Not included)

Connections and Functions (Cont.)

Coax Connection

Connect the Coaxial output of the TV to the Coaxial (SPDIF) input on the amplifier. Your

amplifier must have the corresponding decoding functions to decode the signal coming

from the TV.

USB (Media) Connection

Connect portable USB storage device for multimedia files playback. Select USB input source

using the SOURCE or MEDIA button on the remote control.

Earphone Connection

Connect your earphones for private listening.

Basic Installation (Cont.)

USB (Media) Connection

Connect portable USB storage device for multimedia files playback. Select USB input source using

the SOURCE or MEDIA button on the remote control.

EARPHONE Connection

Connect your Earphones for private listening.

COAXIAL OUT Connection

USB device

(Not included)

Earphone cable

(Not included)

Basic Installation (Cont.)

USB (Media) Connection

Connect portable USB storage device for multimedia files playback. Select USB input source using

the SOURCE or MEDIA button on the remote control.

EARPHONE Connection

Connect your Earphones for private listening.

COAXIAL OUT Connection

USB device

(Not included)

Earphone cable

(Not included)

Basic Installation (Cont.)

USB (Media) Connection

Connect portable USB storage device for multimedia files playback. Select USB input source using

the SOURCE or MEDIA button on the remote control.

EARPHONE Connection

Connect your Earphones for private listening.

COAXIAL OUT Connection

USB device

(Not included)

Earphone cable

(Not included)

Basic Installation (Cont.)

USB (Media) Connection

Connect portable USB storage device for multimedia files playback. Select USB input source using

the SOURCE or MEDIA button on the remote control.

EARPHONE Connection

Connect your Earphones for private listening.

COAXIAL OUT Connection

USB device

(Not included)

Earphone cable

(Not included)

Remote Control

The buttons on the remote control and similarly marked ones on the main unit perform

similar functions.

1 POWER

Set the unit in standby mode; press it again to

switch it on.

2 TV/RADIO (DTV)

Switch the unit between TV and Radio..

(DVD)

Load/eject an available disc.

3 RED button (TV)

GOTO (DVD)

Start playing from a certain point.

4 GREEN button (TV)

ANGLE (DVD)

Change the playing angle, if available.

5 BLUE button (TV)

A-B (DVD)

Repeat playing between A and B.

6 YELLOW button (TV)

REPEAT (DVD)

Change repeat mode.

7 FAV

Display the favorite channels list.

8 TEXT*

Display the available Teletext.

9 EPG (DTV)

Display electronic program guide.

D.MENU (DVD)

Display the main disc menu.

10 HOLD*

Hold the Teletext.

FREEZE

Hold the picture.

11 SUBTITLE

Enable/disable subtitles.

DTV MODE

1. POWER: Set the TV into standby mode, press it

again to switch it on.

2. TV/RADIO: Switch the unit between TV and Radio.

(DVD): Load / Eject a DVD disc.

3. Red Button / GOTO (DVD): Start playing from a

certain point.

4. GREEN button / ANGLE (DVD): Change the

playing angle, if available.

5. BLUE button / A-B (DVD): Repeat playing

between A and B.

6. YELLOW button / REPEAT (DVD): Change repeat

mode.

7. FAV: Display the favorite channel list.

8. TEXT: To display the teletext.

9. EPG (DTV): To display TV guide information.

D.MENU (DVD): Display the main disc menu.

10. HOLD: To hold the teletext. FREEZE: To hold the

picture.

11. SUBTITLE: To switch on subtitle, press it again to

turn off subtitle.

12. SIZE: To switch the teletext size.

Zoom (DVD): To shrink / enlarge the picture.

13. SUBPAGE: Enter the teletext sub-page.

14. ASPECT: Press this button repeatedly to select your

desired aspect ratio of the screen.

15. MEDIA: To enter MEDIA mode directly.

16. : To play or pause playing. To start time shift

directly in DTV mode.

17. : To move fast forward.

18. : To move fast backward.

19. (DTV) : Start recording when watching available

digital programs. D.SETUP (DVD): Call out the setup

menu.

20. : To stop playing.

21. : To play next chapter. INDEX (DTV): Display the

record list.

22. : To play previous chapter.

AK22FLEDCG

Remote Control (Cont.)

DTV MODE 23. MENU: To display the main menu. Press it again to

return to the previous menu.

24. AUDIO: Switch the available sound-track.

LANG (DVD): Switch the available sound-track

language.

25. OK: To confirm a selection.

26. / / / : Navigation buttons

27. SLEEP: To set sleep timer.

28. EXIT: To exit a menu.

TITLE (DVD): Display the title menu.

29. MUTE: To mute all sound.

30. VOL+/-: To increase/decrease the volume.

31. CH+/-: To select next/previous channel.

32. DISPLAY: To display information of the current

program.

33. NUMBER BUTTONS (0-9): To select TV channel

number.

34. -/--: Press this button to enter a program number for

multiple program channel such as 2-1,etc.

35. : Return to the previous channel viewed.

36. SOURCE: To select desired input source.

37. P-MODE: To switch the picture mode.

38. S-MODE: To switch the sound mode.

Teletext function

* Teletext is no longer available, nor is there any plan for

a replacement teletext service in New Zealand. For more

information, please visit the website of the New Zealand

channel providers. However, one teletext option, “closed

captions”, is still working on most New Zealand television

channels. This service allows you to activate subtitles

while watching normal television programs that provide

it.

Remote Control

The buttons on the remote control and similarly marked ones on the main unit perform

similar functions.

1 POWER

Set the unit in standby mode; press it again to

switch it on.

2 TV/RADIO (DTV)

Switch the unit between TV and Radio..

(DVD)

Load/eject an available disc.

3 RED button (TV)

GOTO (DVD)

Start playing from a certain point.

4 GREEN button (TV)

ANGLE (DVD)

Change the playing angle, if available.

5 BLUE button (TV)

A-B (DVD)

Repeat playing between A and B.

6 YELLOW button (TV)

REPEAT (DVD)

Change repeat mode.

7 FAV

Display the favorite channels list.

8 TEXT*

Display the available Teletext.

9 EPG (DTV)

Display electronic program guide.

D.MENU (DVD)

Display the main disc menu.

10 HOLD*

Hold the Teletext.

FREEZE

Hold the picture.

11 SUBTITLE

Enable/disable subtitles.

AK22FLEDCG

Installing the Batteries

Battery Installation

1. Open the cover at the back of the remote control unit completely.

2. Insert two 1.5V AAA batteries, ensuring the polarities (+/-) of the batteries are correctly

aligned and the batteries are properly pushed into place so they can power the remote

control.

3. Place the battery cover back.

Precautions when using batteries

• Do not use old and new batteries together.

• Do not use different types of battery (for example, Manganese and Alkaline batteries)

together.

• Note that there are chargeable and non-chargeable batteries. Do not attempt to charge

non-chargeable batteries.

• Do not drop, step on or otherwise impact the remote control. This may damage the

parts or lead to malfunction.

• Remove the batteries from the remote control unit if you do not intend to use the unit

for a long time.

• When disposing used batteries, follow any guidelines for recycling and disposal of

batteries that apply in your local area.

Remote Control Operation

The remote control should be operated within 5m and 30° to the left or the right of the IR

receiver at the front of the TV.

NOTES:

• The operating distance may vary according to the brightness of the room.

• Do not point bright light at remote control sensor.

• Do not place objects between the remote control and the remote control sensor.

• Do not use this remote control while simultaneously operating remote control of any

other equipment.

Installing the Batteries

1. Open the cover at the back of the remote control unit completely.

2. Insert two 1.5V AAA batteries, ensuring the polarities (+ / -) of the batteries are

correctly aligned and the batteries are properly pushed into place so they can power

the remote control unit.

3. Replace the battery cover.

Precautions when using batteries

● Do not use old and new batteries together.

● Do not use different types of battery (for example, Manganese and Alkaline batteries) together.

● Note that there are chargeable and non-chargeable batteries. Do not attempt to charge

non-chargeable batteries.

● Remove the batteries from the remote control unit if you do not intend to use the unit for a

long time.

● When disposing used batteries, follow any guidelines for recycling and disposal of batteries that

apply in your local area.

Using the Remote Control

The remote control should be operated within 20 feet (5m) and 30° to the left or the

right of the IR receiver at the front of the TV.

First Time Installation

If you are using the TV for the first time, below menu will appear on the screen after turning

on this TV:

OSD Language

Press / button to select this operation and press / button to select desired language.

Country

Press / button to select this operation and press / button to select your country.

Note: If you select other than New Zealand, the unit will not operate correctly for New

Zealand TV signals.

Tuning Setup

Press / button to select this operation and press / button to select tuning type:

DTV, ATV or ATV+DTV.

When above settings are complete, press OK button to start auto channel tuning and this

may take a few minutes.

Once the auto tuning is complete, your TV will show the first channel found.

First Time Installation

When you switch on the TV for the first time, the First Time Installation menu will be displayed on

the screen.

OSD Language

Press ▲/▼ button to select this option and press ◄/► button to select desired language.

Country

Press ▲/▼ button to select this option and press ◄/► button to select your country.

NOTE: If you select other than New Zealand, the unit will not operate correctly for New Zealand TV

signals.

Tuning Setup

Press ▲/▼ button to select this option and press ◄/► button to select tuning type: DTV, ATV, or

ATV+DTV.

When above settings are complete, press OK button to start auto channel tuning and this may

take a few minutes.

Once the auto tuning is complete, your TV will show the first channel found.

First Time Installation

When you switch on the TV for the first time, the First Time Installation menu will be displayed on

the screen.

OSD Language

Press ▲/▼ button to select this option and press ◄/► button to select desired language.

Country

Press ▲/▼ button to select this option and press ◄/► button to select your country.

NOTE: If you select other than New Zealand, the unit will not operate correctly for New Zealand TV

signals.

Tuning Setup

Press ▲/▼ button to select this option and press ◄/► button to select tuning type: DTV, ATV, or

ATV+DTV.

When above settings are complete, press OK button to start auto channel tuning and this may

take a few minutes.

Once the auto tuning is complete, your TV will show the first channel found.

Selecting an Input Source

You can select an input signal source by pressing the SOURCE button on the remote control

or control panel of your TV. The on screen display menu will show up like below image. Press

SOURCE button on the remote control or arrow buttons on the control panel of your TV, and

choose an input signal source.

You can choose the following input sources if you have your audio and video devices

connected to your TV.

When you switch on this TV for the first time, you need to select the language and the

country to search all the available programs in your area.

• Press SOURCE button to display the input source list.

• Press / button to select the input source you want to watch.

• Press OK button to enter the input source.

• Press EXIT button to quit.

On screen Display when you change the volume

1. When you press the VOL+ to increase the volume and VOL- to reduce the volume, the

diagram below shows on your screen for a few seconds.

2. The MUTE symbol will show on one of your screen corners when you press the MUTE

button, press the MUTE button again and the symbol will disappear.

3. You can put the sound on again either by pressing the MUTE button or the VOL+ button.

The diagram below shows the sound level.

Selecting and Input Source

You can select an input signal source by pressing the SOURCE button on the remote control or

control panel of your TV. The on screen display menu shows the diagram below on the your screen,

and you can either press the SOURCE button on the control panel or the arrows buttons on your

remote control to choose an input signal source.

You can choose from the following input sources if you have your audio and video devices

connected to your TV.

When you switch on this TV for the first time, you need to select the language and the

country to search all the available programs in your area.

● Press SOURCE button to display the input source list.

● Press ▲/▼ button to select the input source you want to watch.

● Press OK button to enter the input source.

● Press EXIT button to quit.

On Screen Display when you change the volume

1. When you press the VOL+ to increase the volume and VOL- to reduce the volume, the diagram

below shows on your screen for several seconds.

2. The MUTE symbol will show on one of your screen corners when you press the MUTE button,

press the MUTE button again and the symbol will disappear.

3. You can put the sound on again either by pressing the MUTE button or the VOL+ button. The

diagram below shows your sound level.

Selecting and Input Source

You can select an input signal source by pressing the SOURCE button on the remote control or

control panel of your TV. The on screen display menu shows the diagram below on the your screen,

and you can either press the SOURCE button on the control panel or the arrows buttons on your

remote control to choose an input signal source.

You can choose from the following input sources if you have your audio and video devices

connected to your TV.

When you switch on this TV for the first time, you need to select the language and the

country to search all the available programs in your area.

● Press SOURCE button to display the input source list.

● Press ▲/▼ button to select the input source you want to watch.

● Press OK button to enter the input source.

● Press EXIT button to quit.

On Screen Display when you change the volume

1. When you press the VOL+ to increase the volume and VOL- to reduce the volume, the diagram

below shows on your screen for several seconds.

2. The MUTE symbol will show on one of your screen corners when you press the MUTE button,

press the MUTE button again and the symbol will disappear.

3. You can put the sound on again either by pressing the MUTE button or the VOL+ button. The

diagram below shows your sound level.

Menu Operation in DTV Mode

Basic Menu Operations

1. Press the MENU button on the remote control, the on-screen menu will appear on the

screen.

2. Use / button to select your main option.

3. Use / button to highlight desired option of each item.

4. Press OK button to enter adjust page.

5. Use / / / button to adjust an option and press OK button to conrm it.

6. After nishing your adjustment, press MENU button to save it and go back to previous

menu page.

The main menu items are:

Menu Operations in DTV Mode

Basic Menu Operations

1. Press the MENU button on the remote control, the on-screen menu will appear on the screen.

2. Use ◄/► button to select your main option.

The main menu items are:

3. Use ▲/▼ button to highlight desire option of each item.

4. Press OK button to enter adjusting page.

5. Use ▲/▼/◄/► button to adjust an option and press OK button to confirm it.

6. After finishing your adjustment, press MENU button to save it and go back to previous menu

page.

Channel menu

Auto Tuning

Press ▲/▼ button to select this item and press OK button to enter it.

Channel Menu

Auto Tuning

Press / button to select this item and press OK button to enter it.

Menu Operations in DTV Mode

Basic Menu Operations

1. Press the MENU button on the remote control, the on-screen menu will appear on the screen.

2. Use ◄/► button to select your main option.

The main menu items are:

3. Use ▲/▼ button to highlight desire option of each item.

4. Press OK button to enter adjusting page.

5. Use ▲/▼/◄/► button to adjust an option and press OK button to confirm it.

6. After finishing your adjustment, press MENU button to save it and go back to previous menu

page.

Channel menu

Auto Tuning

Press ▲/▼ button to select this item and press OK button to enter it.

Page is loading ...

Akai AK24FLEDG User manual

Brand: Akai

Model: AK24FLEDG

Category: LCD TVs

Type: User manual

This manual is also suitable for

AK22FLEDCG

Download PDF

report

Akai AK24FLEDG User manual

This manual is also suitable for

Akai AK24FLEDG User manual

Related papers

Other documents