Akai AK22FLEDCG User manual

Category
LCD TVs
Type
User manual

This manual is also suitable for

21.5” (54.6cm) FHD LED LCD TV
with Built-in DVD Player
AK22FLEDCG
Instruction Manual
AFTER SALES SUPPORT
NZ: 0800 883 301
N13275
2
Contents
Important Safety Instructions 4
Usage conditions and restrictions 4
Electrical safety, power cord and plug 5
Position 5
Cleaning and maintenance 5
Assembly 7
Mounting Instructions 8
Connections and Functions 9
Remote Control 15
Installing the Batteries 17
Remote Control Operation 17
First Time Installation 18
Selecting an Input Source 19
Menu Operation in DTV Mode 20
Channel Menu 20
Picture Mode 24
Sound Mode 25
Time Settings 26
Lock Menu 27
Hotel Mode 28
Setup 29
Menu Operation in PC Mode 30
Menu Operation in Other Mode 31
PVR and Time Shift Operation 32
Media (Multimedia) Playback 36
Photo Menu 37
Music Menu 38
Movie Menu 39
Text Menu 40
EPG (Electronic Program Guide) 42
Built-in DVD Player Operation 43
3
Contents
Specications 49
Care and Maintenance 50
Responsible Disposal 50
FAQs 51
4
Important Safety Instructions
Read this manual thoroughly before rst use and keep it in a safe place for future reference,
along with the warranty card, purchase receipt and carton. The safety precautions enclosed
herein reduce the risk of re, electric shock and injury when correctly adhered to.
Usage conditions and restrictions
To prevent any injuries, the following safety precautions should be observed in the
installation, use, servicing and maintenance of equipment. Before operating this equipment,
please read this manual completely, and keep it nearby for future reference.
Take notice of all the warnings.
• Do not use this TV near water.
• Clean only with a dry cloth.
Do not block any of the ventilation openings.
• Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other TVs
(including ampliers) that produce heat.
Do not alter the grounding type plug provided with the TV. A grounding type plug has two
blades and a third grounding prong. The third prong is provided for your safety. When the
provided plug does not t into your outlet, consult an electrician for replacement of the
obsolete outlet.
Protect the power cord from being walked on or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the TV.
Only use the attachments/accessories specied by the manufacturer.
Use only with a cart, stand, tripod, bracket, or table specied by the manufacturer, or sold
with the TV.
Unplug this TV during lightning storms or when unused for long periods of time.
The appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible
for their safety.
Young children should be supervised to ensure they do not play with the appliance.
Refer all servicing to qualied service personnel. Servicing is required when the TV has been
damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled
or objects have fallen into the TV, the TV has been exposed to rain or moisture, does not
operate normally, or has been dropped.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or
similarly qualied persons in order to avoid a hazard.
NOTE: The TV must not be exposed to dripping or splashing and no objects lled with
liquids, such as vases, shall be placed on the TV.
5
Important Safety Instructions (Cont.)
Position
If a television is not positioned in a suciently stable location, it can be potentially
hazardous due to falling. Many injuries, particularly to children, can be avoided by taking
simple precautions such as:
Securely attaching the TV to the wall mount fastened on the wall.
Only using furniture that can safely support the television.
Ensuring the television is not overhanging the edge of the supporting furniture.
Educating children about the dangers of climbing on furniture to reach the TV controls.
Not standing the TV on cloth or other materials placed between the television and
supporting furniture.
Not placing the television on tall furniture (for example, cupboards or bookcases)
without anchoring both the furniture and the television to a suitable support.
When deciding on where to put the TV set, make sure the place is:
Well ventilated.
Away from damp and cold.
Protected from overheating and away from direct sunlight.
Away from moisture drips or splashes.
Protected from excessive dust.
Do not install this equipment in a conned space such as a bookcase or similar unit.
Do not put any objects lled with liquids, such as vases, on top of the TV set.
Do not place any naked ame sources, such as lighted candles, on top of the TV set.
Cleaning and maintenance
Dust the TV set by wiping the screen and cabinet with a soft, clean cloth.
Electrical safety, power cord and plug
Before installing this TV set, make sure your outlet voltage corresponds to the voltage
stated on the appliance rating label.
To reduce the risk of re or electric shock, do not expose this appliance to rain or moisture.
Do not overload the power cord or power outlet.
Do not let the cord hang over the edge of a table or counter, or touch any hot surface.
Do not allow anything to rest on or roll over the power cord and signal cable.
Protect the power cord and signal cable from being trampled.
Do not expose the power cord and signal cable to moisture.
6
Important Safety Instructions (Cont.)
Do not apply excessive force to the screen when cleaning.
Do not clean the screen with water or chemical cleaners as this may damage the LED
screen surface.
Do not dismantle this product by yourself, as this may cause damage. There are no user-
serviceable parts contained in the TV set.
If your TV set has been damaged, contact the after sales support line for advice or take
it to a local service centre or for inspection or repair. No liability can be accepted for any
damage caused by non-compliance with these instructions or any other improper use or
mishandling of appliance.
TV with Class 1 construction shall be connected to a main socket outlet with a protective
earthing connection.
WARNING:
TO PREVENT DAMAGE WHICH MAY RESULT IN FIRE OR AN ELECTRIC SHOCK HAZARD, DO
NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTIONS: These servicing instructions are for use by qualied service personnel only. To
reduce the risk of electric shock, do not perform any servicing other than that
contained in the operating instructions unless you are qualied to do so.
Any changes or modications not expressly approved by the party
responsible for compliance could void the users authority to operate the
equipment.
This symbol indicates that dangerous voltage constituting a risk of
electric shock is present within this unit.
This symbol indicates that there are important operating and
maintenance instructions in the documentation accompanying this unit.
CAUTION: TO PREVENT THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
7
Contents of carton:
1 x TV Set 1 x Instruction Manual 1 x Stand Base
1 x Remote Control 2 x AAA Batteries 2 x Screws (for stand)
1 x AC Adaptor
Assemble the stand
Your TV is packaged with the stand and the cabinet
separately. Before enjoying your TV, please take out
the stand and follow instructions below to assemble
the TV.
Step1
Place the TV faced down on a soft cloth or
cushion to prevent the panel from being
damaged.
Step2
Align the screw holds on the stand with the TV
bottom. Push the stand until the TV is fully seated
on the stand.
Note: Make sure the orientation of trapezoid head
on the stand is corresponding to the trapezoid
slot on the TV bottom.
Step3
Tighten the included screws with a screw drive.
Notes:
Unplug the power adaptor rst when
installing or removing the TV stand.
To avoid any damage to the TV, ask one or
more people for assistance when installing
or removing the TV stand.
Assembly
Assembly
Contents of carton:
1 x TV Set 1 x Instruction manual 1 x Stand base
1 x Remote control 2 x AAA batteries 2 x Screws (for stand)
1 x AC Adaptor
Assemble the stand
Step 1
Place the TV faced down on a soft cloth or cushion to
prevent the panel from being damaged.
Step 2
Align the screw holes on stand and TV bottom and
then push the stand until the TV is fully seated on
the stand.
NOTE: Make sure the orientation of trapezoid head
on stand is corresponding to the trapezoid slot on TV
bottom.
Step 3
Tighten the included screws with a screw driver.
NOTES:
- Unplug the power adaptor first when installing or
removing the TV Stand.
- To avoid any damage to this TV, contact one or
more partner for assistance when installing or
removing the TV stand.
6
Press
8
Mounting Instructions
Notes:
Contact a professional for assistance when wall mounting your TV. We are not responsible for
any damage to the product or injury to yourself, if you mount the TV on your own.
Do not wall mount the TV while TV is turned on. It may cause personal injury due to electric
shock. Always unplug and disconnect the power source before mounting your TV.
Use standard M4*10mm screws (4 pieces) to mount this TV.
Wall Mounting
This television set is equipped with holes on the back panel for use with wall mounting
baskets (not included). Please use the image below as a reference when buying wall
mounting baskets.
NOTE: The distance between the holes is 100 x 100mm in width and height.
Note: The screws in the package are for securing the TV stand only. If you are wall mounting the TV,
consult a qualied installer for further instructions on brackets support and wall support.
Assembly (Cont.)
Wall mounting
This television set is equipped with holes on the back panel for use with wall-mounting
brackets (not included). Please use the image below as a reference when buying
wall-mounting brackets.
NOTE: The distance between the holes is 100 x 100mm in width and height.
For wall-mounting, remove all three screws
to remove the entire stand assembly.
NOTE: The screws in the package are for securing the TV stand only. If you are
wall-mounting the TV, consult a qualified installer for further instructions on bracket
support and wall support.
7
For wall mounting, remove all three screws
to remove the entire stand assembly.
9
Connections and Functions
1. LED display screen.
2. Power indicator - In standby mode the
indicator light is red. When the TV is
switched on, the indicator light shows blue.
3. Remote control sensor.
4. Stand holder.
5. Disc Slot - To insert a disc according to the
silkscreen on the side of the slot.
6. - To play or pause playing (DVD)
7. - To open or close the disc compartment.
8. VOLUME +/- button - To increase/decrease
the volume level or move left/right.
9. CHANNEL +/- button - To select next/
previous channel or move up/down.
10. MENU button - To enter menu setting page.
11. SOURCE button - To select the input source.
12. POWER button - To turn the TV On/O.
Controls and Connections
1. LED display screen
2. Power indicator- In standby mode the
indicator shows red; when switching on
the unit the indicator shows blue.
3. Remote control sensor
4. Stand holder
5. Disc slot- To insert a disc according to
the silk screen on the side of this slot.
6. - To play or pause playing (DVD).
7. - To open or close the disc
compartment.
8. VOLUME +/- button- To
increase/decrease the volume level or
move left/right.
9. CHANNEL +/- button- To select
next/previous channel or move
up/down.
10. MENU button- To enter menu setting
page.
11. SOURCE button- To select the input
source.
12. POWER button- To turn the TV ON/OFF.
8
View
Front
View
Side
View
Controls and Connections
1. LED display screen
2. Power indicator- In standby mode the
indicator shows red; when switching on
the unit the indicator shows blue.
3. Remote control sensor
4. Stand holder
5. Disc slot- To insert a disc according to
the silk screen on the side of this slot.
6. - To play or pause playing (DVD).
7. - To open or close the disc
compartment.
8. VOLUME +/- button- To
increase/decrease the volume level or
move left/right.
9. CHANNEL +/- button- To select
next/previous channel or move
up/down.
10. MENU button- To enter menu setting
page.
11. SOURCE button- To select the input
source.
12. POWER button- To turn the TV ON/OFF.
8
Back
View
Front
View
Side
View
10
1. Power Input: Connect the included power adaptor.
2. HDMI 1: Connect the HDMI output jack of DVD.
3. PC AUDIO: Connect the audio output jack of PC.
4. VGA: Connect the PC-RGB output jack of PC.
5. YPbPr (Component): Connect the YPbPr output jack of DVD
6. CVBS: Connect the Video output jack of DVD.
7. R/L: Connect the R/L audio output jack of DVD.
8. COAXIAL: Connect the SPDIF receiver.
9. RF: Connection the antenna
10. HDMI 2: Connect the HDMI output jack of DVD.
11. USB: Connect to portable USB storage device.
12. Earphone: Connect the earphone.
13. Built-in Speaker.
Controls and Connections (Cont.)
1. Power input: Connect the included power adaptor.
2. HDMI 1: Connect the HDMI output jack of DVD
3. PC AUDIO: Connect the Audio output jack of PC.
4. VGA: Connect the PC-RGB output jack of PC.
5. YPbPr (Componnet): Connect the YPbPr output jacks of DVD.
6. CVBS: Connect the Video output jack of DVD.
7. R/L: Connect the R/L audio output jack of DVD.
8. COAXIAL: Connect the SPDIF receiver.
9. RF: Connect the antenna.
10. HDMI 2: Connect the HDMI output jack of DVD.
11. USB: Connect the portable USB device.
12. EARPHONE: Connect the earphone.
13. Built-in Speakers
9
Back
View
Connections and Function (Cont.)
12
11
10
9
8
11
Connections and Functions (Cont.)
Power Cord Connection
- Connect the power cord correctly as shown.
- Press the POWER switch of your TV to switch the unit on. The power indicator on the front
panel lights up in blue.
Antennas Connection
To ensure good picture and sound, a TV antenna system needs to be installed. The antenna
system as shown can be sourced from TV equipment stores, which will provide service for
correct installation and connections. After installation, insert the 75-OHM antenna plug into
the antenna socket as shown.
Basic Installation
Power Connection
Connect the power adaptor to power outlet correctly as shown below.
Press the POWER switch on your TV or Remote Control to switch the unit on. The power
indicator on the front panel lights up in blue.
Antenna Connection
To ensure good picture and sound, a TV antenna system needs to be connected. The antenna
system as shown can be sourced from TV equipment stores, which will provide service for the
correct installation and connection. After installation, insert the 75-OHM antenna plug into the
antenna jack (RF) as shown below.
14
To power outlet
Basic Installation
Power Connection
Connect the power adaptor to power outlet correctly as shown below.
Press the POWER switch on your TV or Remote Control to switch the unit on. The power
indicator on the front panel lights up in blue.
Antenna Connection
To ensure good picture and sound, a TV antenna system needs to be connected. The antenna
system as shown can be sourced from TV equipment stores, which will provide service for the
correct installation and connection. After installation, insert the 75-OHM antenna plug into the
antenna jack (RF) as shown below.
14
To power outlet
12
Connections and Functions (Cont.)
Component (YPbPr) Connection
Connect the YPbPr output of the DVD or VCR to the YPbPr input on the set. The picture
quality is improved compared to connecting a regular VCR to the AC input. Connect the
Audio output of the DVD or VCR to the Audio input jacks on the set using the RCA cable.
Match the jacks colours: Y is green, Pb is blue, Pr is red. Audio left is white and Audio right in
red. Select Component input source using the SOURCE button on the remote control.
AV (CVBS) Connection
Connect the VIDEO and AUDIO output jack of the DVD or VCR to the AV IN jacks on the set
using the AV cable (Yellow [video], White and Red [left and right audio]). Select the AV input
source using the SOURCE button on the remote control.
Basic Installation (Cont.)
AV (CVBS) Connection
Connect the VIDEO and AUDIO output jack of the DVD or VCR to the AV IN jacks in the set using an
AV Cable (Yellow [video], White and Red [left & right audio]). Select the AV input source using the
SOURCE button on the remote control.
Component (YPbPr) Connection
Connect the YPbPr output of the DVD or VCR to the YPbPr input on the set. The picture quality is
improved compared to connecting a regular VCR to the AV input. Connect the Audio output of the
DVD or VCR to the Audio input jacks on the set using the RCA cable. Match the jack colours: Y is
green, Pb is blue, Pr is red, Audio left is white and Audio right is red, Select Component input
source using the SOURCE button on the remote control.
15
AV cable
(Not included)
YPbPr cable
(Not included)
AUDIO cable
(Not included)
Basic Installation (Cont.)
AV (CVBS) Connection
Connect the VIDEO and AUDIO output jack of the DVD or VCR to the AV IN jacks in the set using an
AV Cable (Yellow [video], White and Red [left & right audio]). Select the AV input source using the
SOURCE button on the remote control.
Component (YPbPr) Connection
Connect the YPbPr output of the DVD or VCR to the YPbPr input on the set. The picture quality is
improved compared to connecting a regular VCR to the AV input. Connect the Audio output of the
DVD or VCR to the Audio input jacks on the set using the RCA cable. Match the jack colours: Y is
green, Pb is blue, Pr is red, Audio left is white and Audio right is red, Select Component input
source using the SOURCE button on the remote control.
15
AV cable
(Not included)
YPbPr cable
(Not included)
AUDIO cable
(Not included)
13
Connections and Functions (Cont.)
VGA (PC) Connection
Connect the RGB output of the PC to the VGA jack on the set. Connect the AUDIO output of
the PC to the PC AUDIO jack on the set. Select the PC input source using the SOURCE button
the remote control.
HDMI Connection
HDMI is a digital connection for sending both Video and Sound signals through one cable.
HDMI supports 1080P video and multi channel digital audio. Connect HDMI output of DVD
or VCR to HDMI jack. Select related HDMI input source using the SOURCE button on the
remote control.
Basic Installation (Cont.)
VGA (PC) Connection
Connect the VGA output of the PC to the VGA jack on the set. Connect the AUDIO output of the PC
to the PC AUDIO jack on the set. Select the PC input source using the SOURCE button on the
remote control.
HDMI Connection
HDMI is a digital connection for sending both Video & Sound signals through the one cable. HDMI
supports 1080p Video and Multi-channel Digital Audio. Connect HDMI out of DVD or VCR to HDMI
jack. Select related HDMI input source using the SOURCE button on the remote control.
16
AUDIO cable
(Not included)
VGA cable
(Not included)
HDMI cable
(Not included)
Basic Installation (Cont.)
VGA (PC) Connection
Connect the VGA output of the PC to the VGA jack on the set. Connect the AUDIO output of the PC
to the PC AUDIO jack on the set. Select the PC input source using the SOURCE button on the
remote control.
HDMI Connection
HDMI is a digital connection for sending both Video & Sound signals through the one cable. HDMI
supports 1080p Video and Multi-channel Digital Audio. Connect HDMI out of DVD or VCR to HDMI
jack. Select related HDMI input source using the SOURCE button on the remote control.
16
AUDIO cable
(Not included)
VGA cable
(Not included)
HDMI cable
(Not included)
14
Connections and Functions (Cont.)
Coax Connection
Connect the Coaxial output of the TV to the Coaxial (SPDIF) input on the amplifier. Your
amplifier must have the corresponding decoding functions to decode the signal coming
from the TV.
USB (Media) Connection
Connect portable USB storage device for multimedia files playback. Select USB input source
using the SOURCE or MEDIA button on the remote control.
Earphone Connection
Connect your earphones for private listening.
Basic Installation (Cont.)
USB (Media) Connection
Connect portable USB storage device for multimedia files playback. Select USB input source using
the SOURCE or MEDIA button on the remote control.
EARPHONE Connection
Connect your Earphones for private listening.
COAXIAL OUT Connection
17
USB device
(Not included)
Earphone cable
(Not included)
Basic Installation (Cont.)
USB (Media) Connection
Connect portable USB storage device for multimedia files playback. Select USB input source using
the SOURCE or MEDIA button on the remote control.
EARPHONE Connection
Connect your Earphones for private listening.
COAXIAL OUT Connection
17
USB device
(Not included)
Earphone cable
(Not included)
Basic Installation (Cont.)
USB (Media) Connection
Connect portable USB storage device for multimedia files playback. Select USB input source using
the SOURCE or MEDIA button on the remote control.
EARPHONE Connection
Connect your Earphones for private listening.
COAXIAL OUT Connection
17
USB device
(Not included)
Earphone cable
(Not included)
Basic Installation (Cont.)
USB (Media) Connection
Connect portable USB storage device for multimedia files playback. Select USB input source using
the SOURCE or MEDIA button on the remote control.
EARPHONE Connection
Connect your Earphones for private listening.
COAXIAL OUT Connection
17
USB device
(Not included)
Earphone cable
(Not included)
15
Remote Control
Remote Control
The buttons on the remote control and similarly marked ones on the main unit perform
similar functions.
1 POWER
Set the unit in standby mode; press it again to
switch it on.
2 TV/RADIO (DTV)
Switch the unit between TV and Radio..
(DVD)
Load/eject an available disc.
3 RED button (TV)
GOTO (DVD)
Start playing from a certain point.
4 GREEN button (TV)
ANGLE (DVD)
Change the playing angle, if available.
5 BLUE button (TV)
A-B (DVD)
Repeat playing between A and B.
6 YELLOW button (TV)
REPEAT (DVD)
Change repeat mode.
7 FAV
Display the favorite channels list.
8 TEXT*
Display the available Teletext.
9 EPG (DTV)
Display electronic program guide.
D.MENU (DVD)
Display the main disc menu.
10 HOLD*
Hold the Teletext.
FREEZE
Hold the picture.
11 SUBTITLE
Enable/disable subtitles.
10
DTV MODE
1. POWER: Set the TV into standby mode, press it
again to switch it on.
2. TV/RADIO: Switch the unit between TV and Radio.
(DVD): Load / Eject a DVD disc.
3. Red Button / GOTO (DVD): Start playing from a
certain point.
4. GREEN button / ANGLE (DVD): Change the
playing angle, if available.
5. BLUE button / A-B (DVD): Repeat playing
between A and B.
6. YELLOW button / REPEAT (DVD): Change repeat
mode.
7. FAV: Display the favorite channel list.
8. TEXT: To display the teletext.
9. EPG (DTV): To display TV guide information.
D.MENU (DVD): Display the main disc menu.
10. HOLD: To hold the teletext. FREEZE: To hold the
picture.
11. SUBTITLE: To switch on subtitle, press it again to
turn off subtitle.
12. SIZE: To switch the teletext size.
Zoom (DVD): To shrink / enlarge the picture.
13. SUBPAGE: Enter the teletext sub-page.
14. ASPECT: Press this button repeatedly to select your
desired aspect ratio of the screen.
15. MEDIA: To enter MEDIA mode directly.
16. : To play or pause playing. To start time shift
directly in DTV mode.
17. : To move fast forward.
18. : To move fast backward.
19. (DTV) : Start recording when watching available
digital programs. D.SETUP (DVD): Call out the setup
menu.
20. : To stop playing.
21. : To play next chapter. INDEX (DTV): Display the
record list.
22. : To play previous chapter.
AK22FLEDCG
16
Remote Control (Cont.)
DTV MODE 23. MENU: To display the main menu. Press it again to
return to the previous menu.
24. AUDIO: Switch the available sound-track.
LANG (DVD): Switch the available sound-track
language.
25. OK: To confirm a selection.
26. / / / : Navigation buttons
27. SLEEP: To set sleep timer.
28. EXIT: To exit a menu.
TITLE (DVD): Display the title menu.
29. MUTE: To mute all sound.
30. VOL+/-: To increase/decrease the volume.
31. CH+/-: To select next/previous channel.
32. DISPLAY: To display information of the current
program.
33. NUMBER BUTTONS (0-9): To select TV channel
number.
34. -/--: Press this button to enter a program number for
multiple program channel such as 2-1,etc.
35. : Return to the previous channel viewed.
36. SOURCE: To select desired input source.
37. P-MODE: To switch the picture mode.
38. S-MODE: To switch the sound mode.
Teletext function
* Teletext is no longer available, nor is there any plan for
a replacement teletext service in New Zealand. For more
information, please visit the website of the New Zealand
channel providers. However, one teletext option, closed
captions”, is still working on most New Zealand television
channels. This service allows you to activate subtitles
while watching normal television programs that provide
it.
Remote Control
The buttons on the remote control and similarly marked ones on the main unit perform
similar functions.
1 POWER
Set the unit in standby mode; press it again to
switch it on.
2 TV/RADIO (DTV)
Switch the unit between TV and Radio..
(DVD)
Load/eject an available disc.
3 RED button (TV)
GOTO (DVD)
Start playing from a certain point.
4 GREEN button (TV)
ANGLE (DVD)
Change the playing angle, if available.
5 BLUE button (TV)
A-B (DVD)
Repeat playing between A and B.
6 YELLOW button (TV)
REPEAT (DVD)
Change repeat mode.
7 FAV
Display the favorite channels list.
8 TEXT*
Display the available Teletext.
9 EPG (DTV)
Display electronic program guide.
D.MENU (DVD)
Display the main disc menu.
10 HOLD*
Hold the Teletext.
FREEZE
Hold the picture.
11 SUBTITLE
Enable/disable subtitles.
10
AK22FLEDCG
17
Installing the Batteries
Battery Installation
1. Open the cover at the back of the remote control unit completely.
2. Insert two 1.5V AAA batteries, ensuring the polarities (+/-) of the batteries are correctly
aligned and the batteries are properly pushed into place so they can power the remote
control.
3. Place the battery cover back.
Precautions when using batteries
Do not use old and new batteries together.
Do not use different types of battery (for example, Manganese and Alkaline batteries)
together.
Note that there are chargeable and non-chargeable batteries. Do not attempt to charge
non-chargeable batteries.
Do not drop, step on or otherwise impact the remote control. This may damage the
parts or lead to malfunction.
Remove the batteries from the remote control unit if you do not intend to use the unit
for a long time.
When disposing used batteries, follow any guidelines for recycling and disposal of
batteries that apply in your local area.
Remote Control Operation
The remote control should be operated within 5m and 30° to the left or the right of the IR
receiver at the front of the TV.
NOTES:
The operating distance may vary according to the brightness of the room.
Do not point bright light at remote control sensor.
Do not place objects between the remote control and the remote control sensor.
Do not use this remote control while simultaneously operating remote control of any
other equipment.
Installing the Batteries
1. Open the cover at the back of the remote control unit completely.
2. Insert two 1.5V AAA batteries, ensuring the polarities (+ / -) of the batteries are
correctly aligned and the batteries are properly pushed into place so they can power
the remote control unit.
3. Replace the battery cover.
Precautions when using batteries
Do not use old and new batteries together.
Do not use different types of battery (for example, Manganese and Alkaline batteries) together.
Note that there are chargeable and non-chargeable batteries. Do not attempt to charge
non-chargeable batteries.
Remove the batteries from the remote control unit if you do not intend to use the unit for a
long time.
When disposing used batteries, follow any guidelines for recycling and disposal of batteries that
apply in your local area.
Using the Remote Control
The remote control should be operated within 20 feet (5m) and 30° to the left or the
right of the IR receiver at the front of the TV.
13
18
First Time Installation
If you are using the TV for the first time, below menu will appear on the screen after turning
on this TV:
OSD Language
Press / button to select this operation and press / button to select desired language.
Country
Press / button to select this operation and press / button to select your country.
Note: If you select other than New Zealand, the unit will not operate correctly for New
Zealand TV signals.
Tuning Setup
Press / button to select this operation and press / button to select tuning type:
DTV, ATV or ATV+DTV.
When above settings are complete, press OK button to start auto channel tuning and this
may take a few minutes.
Once the auto tuning is complete, your TV will show the first channel found.
First Time Installation
When you switch on the TV for the first time, the First Time Installation menu will be displayed on
the screen.
OSD Language
Press ▲/▼ button to select this option and press /button to select desired language.
Country
Press ▲/▼ button to select this option and press /button to select your country.
NOTE: If you select other than New Zealand, the unit will not operate correctly for New Zealand TV
signals.
Tuning Setup
Press ▲/▼ button to select this option and press /button to select tuning type: DTV, ATV, or
ATV+DTV.
When above settings are complete, press OK button to start auto channel tuning and this may
take a few minutes.
Once the auto tuning is complete, your TV will show the first channel found.
18
First Time Installation
When you switch on the TV for the first time, the First Time Installation menu will be displayed on
the screen.
OSD Language
Press ▲/▼ button to select this option and press /button to select desired language.
Country
Press ▲/▼ button to select this option and press /button to select your country.
NOTE: If you select other than New Zealand, the unit will not operate correctly for New Zealand TV
signals.
Tuning Setup
Press ▲/▼ button to select this option and press /button to select tuning type: DTV, ATV, or
ATV+DTV.
When above settings are complete, press OK button to start auto channel tuning and this may
take a few minutes.
Once the auto tuning is complete, your TV will show the first channel found.
18
19
Selecting an Input Source
You can select an input signal source by pressing the SOURCE button on the remote control
or control panel of your TV. The on screen display menu will show up like below image. Press
SOURCE button on the remote control or arrow buttons on the control panel of your TV, and
choose an input signal source.
You can choose the following input sources if you have your audio and video devices
connected to your TV.
When you switch on this TV for the first time, you need to select the language and the
country to search all the available programs in your area.
Press SOURCE button to display the input source list.
Press / button to select the input source you want to watch.
Press OK button to enter the input source.
Press EXIT button to quit.
On screen Display when you change the volume
1. When you press the VOL+ to increase the volume and VOL- to reduce the volume, the
diagram below shows on your screen for a few seconds.
2. The MUTE symbol will show on one of your screen corners when you press the MUTE
button, press the MUTE button again and the symbol will disappear.
3. You can put the sound on again either by pressing the MUTE button or the VOL+ button.
The diagram below shows the sound level.
Selecting and Input Source
You can select an input signal source by pressing the SOURCE button on the remote control or
control panel of your TV. The on screen display menu shows the diagram below on the your screen,
and you can either press the SOURCE button on the control panel or the arrows buttons on your
remote control to choose an input signal source.
You can choose from the following input sources if you have your audio and video devices
connected to your TV.
When you switch on this TV for the first time, you need to select the language and the
country to search all the available programs in your area.
Press SOURCE button to display the input source list.
Press ▲/▼ button to select the input source you want to watch.
Press OK button to enter the input source.
Press EXIT button to quit.
On Screen Display when you change the volume
1. When you press the VOL+ to increase the volume and VOL- to reduce the volume, the diagram
below shows on your screen for several seconds.
2. The MUTE symbol will show on one of your screen corners when you press the MUTE button,
press the MUTE button again and the symbol will disappear.
3. You can put the sound on again either by pressing the MUTE button or the VOL+ button. The
diagram below shows your sound level.
19
Selecting and Input Source
You can select an input signal source by pressing the SOURCE button on the remote control or
control panel of your TV. The on screen display menu shows the diagram below on the your screen,
and you can either press the SOURCE button on the control panel or the arrows buttons on your
remote control to choose an input signal source.
You can choose from the following input sources if you have your audio and video devices
connected to your TV.
When you switch on this TV for the first time, you need to select the language and the
country to search all the available programs in your area.
Press SOURCE button to display the input source list.
Press ▲/▼ button to select the input source you want to watch.
Press OK button to enter the input source.
Press EXIT button to quit.
On Screen Display when you change the volume
1. When you press the VOL+ to increase the volume and VOL- to reduce the volume, the diagram
below shows on your screen for several seconds.
2. The MUTE symbol will show on one of your screen corners when you press the MUTE button,
press the MUTE button again and the symbol will disappear.
3. You can put the sound on again either by pressing the MUTE button or the VOL+ button. The
diagram below shows your sound level.
19
20
Menu Operation in DTV Mode
Basic Menu Operations
1. Press the MENU button on the remote control, the on-screen menu will appear on the
screen.
2. Use / button to select your main option.
3. Use / button to highlight desired option of each item.
4. Press OK button to enter adjust page.
5. Use / / / button to adjust an option and press OK button to conrm it.
6. After nishing your adjustment, press MENU button to save it and go back to previous
menu page.
The main menu items are:
Menu Operations in DTV Mode
Basic Menu Operations
1. Press the MENU button on the remote control, the on-screen menu will appear on the screen.
2. Use /button to select your main option.
The main menu items are:
3. Use ▲/▼ button to highlight desire option of each item.
4. Press OK button to enter adjusting page.
5. Use ▲/▼/◄/► button to adjust an option and press OK button to confirm it.
6. After finishing your adjustment, press MENU button to save it and go back to previous menu
page.
Channel menu
Auto Tuning
Press ▲/▼ button to select this item and press OK button to enter it.
20
Channel Menu
Auto Tuning
Press / button to select this item and press OK button to enter it.
Menu Operations in DTV Mode
Basic Menu Operations
1. Press the MENU button on the remote control, the on-screen menu will appear on the screen.
2. Use /button to select your main option.
The main menu items are:
3. Use ▲/▼ button to highlight desire option of each item.
4. Press OK button to enter adjusting page.
5. Use ▲/▼/◄/► button to adjust an option and press OK button to confirm it.
6. After finishing your adjustment, press MENU button to save it and go back to previous menu
page.
Channel menu
Auto Tuning
Press ▲/▼ button to select this item and press OK button to enter it.
20
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48
  • Page 49 49
  • Page 50 50
  • Page 51 51
  • Page 52 52
  • Page 53 53
  • Page 54 54
  • Page 55 55
  • Page 56 56

Akai AK22FLEDCG User manual

Category
LCD TVs
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI