KaVo SONOsoft PIEZOlux Operating instructions

Brand: KaVo

Model: SONOsoft PIEZOlux

Type: Operating instructions

Dear Dr

KaVo hopes you will have a great deal of pleasure using your new high-quality product

SONOsoft/PIEZOlux paro tips.

To enable you to work economically, safely and without problems, please adhere to the following

guidelines:

Technical Data

Tip No. 63 PA - Straight

Tip No. 64 PA - Left

Tip No. 65 PA - Right

May be used with

KaVo SONOsoft

KaVo SONOsoft LUX

KaVo PIEZOlux

Do not use tips on brands of

other manufacturers.

Important information

The SONOsoft/PIEZOlux paro tips in combination with KaVo SONOsoft/PIEZOlux are:

- intended only for dental treatment in the area of dental medicine and any misuse

is not permitted and may lead to injury,

- medical products in accordance with the relevant, national statutory provisions.

According to these provisions, the SONOsoft paro tips should be used by a competent

user only for the application described, taking into account

- the applicable work safety provisions,

- the applicable accident prevention measures

- and these operating instructions.

According to these provisions, it is the user's duty

- to use only defect-free operating materials,

- to ensure use for the correct purpose,

- to protect the patient and third parties from danger,

- to avoid contamination by the product.

Commissioning

Insertion of the tips

Screw the desired tip into the handpiece by turning

clockwise with the wrench and tighten slightly.

Changing the tips

Place wrench on the working tip, unscrew and remove

by turning counterclockwise.

Changing of tips

Place spanner onto tip and unscrew in an

anticlockwise direction.

Vertrieb/distribution: Hersteller/manufacturer:

KaVo Dental GmbH Kaltenbach & Voigt GmbH

Bismarckring 39 Bismarckring 39

D-88400 Biberach D-88400 Biberach

SONOsoft/PIEZOlux paro tips

for subgingival plaque removal

Mat.-No. 1.000.2343

en INSTRUCTION FOR USE

1.001.8570 - 07.02

Safety information

A fracture may occur owing to continuous

stress or through damage (falling on the floor

or deformation of the original shape). Each

time before use, the tip should therefore be

checked for operational safety by pressing

gently with the thumb or index finger. As an

additional safety measure, the tips should be

loaded mechanically with about 10 N (1 kg)

without operation.

We recommend replacing the tips

every 9-12 months.

Method of use

Regular treatment is very important for successful periodontic therapy, in order to remove

the pathogenic plaque and to clean the root surface. Formation of further plaque should

be reduced as a result. To date, only sharp-edged tips or manual instruments have been

available to the dentist for this work.

With these new tip instruments, subgingival plaque and endotoxins can be removed from

the root surface and efficiently washed away by the internally conducted spray. The

Sonosoft paro tips have been developed specially for finishing and periodontic treatments.

Hard tartar and calculus can be removed using the diamond-coated SONICflex rootplaner

tips and the SONICflex handpiece drive system.

The Sonosoft paro tips are rounded and have no sharp edges. The tips are present in

three different versions in the set. The straight SONOsoft paro tip is suitable for universal

use in any quadrant. For poorly accessible pockets, the angled SONOsoft paro tips can

be used.

If the tip is held in the hand with the threaded end facing the viewer, the angling to the

right or left is readily detectable.

The Sonosoft paro tips are designed for the following areas:

SONOsoft paro

, straight, No. 63 - all quadrants

SONOsoft paro

, angled to the left, No. 64 - Lower jaw left-vestibular

- Lower jaw right-lingual

- Upper jaw right-vestibular

- Upper jaw left-lingual

SONOsoft paro

, angled to the right, No. 65 - Lower jaw left-lingual

Lower jaw right-vestibular

Upper jaw right-lingual

Upper jaw left-vestibular

In order to avoid damage to the root surface, the extreme distal working end of the

Sonosoft paro tip should not be placed against the root surface. Work should be carried

out using only the front, rear or lateral surfaces of the Sonosoft/PIEZOlux paro tips.

Care instructions

Clean the tip externally with an alcohol solution.

Unscrew the tip by turning counterclockwise

with a wrench.

Clean planar surface of the tip and planar

surface of the handpiece with alcohol or a

rubber eraser. If required, unblock the water

passage of the tip using the nozzle needle

supplied.

Sterilisation

The Sonosoft/PIEZOlux paro tips can be sterilised in an autoclave at up to 135°C.

After each sterilisation cycle, the SONOsoft/PIEZOlux paro tips must be

immediately removed from the steriliser since otherwise there may be danger

of contact corrosion.

Accessories

Available through dental dealers

Name Mat.-No.

Tip No. 63 1.000.2222

Tip No. 64 1.000.2223

Tip No. 65 1.000.2224

Wrench 0.411.0892

Special accessories

Nozzle needle 0.410.0911

Torque wrench 1.000.4887

KaVo SONOsoft PIEZOlux Operating instructions

KaVo SONOsoft PIEZOlux Operating instructions

KaVo SONOsoft PIEZOlux Operating instructions

Related papers

Other documents