Page is loading ...
USER GUIDANCE
1.Adopt wireless wall-mounted design,and recommended installation height is 6.56ft-13.12ft, the bestinstallation height
is 8ft-9ft. Tips：Do not support evea-mounted and make sure the detector is inclined downward.
2.Flood light will be activated when detect motion and stay on for 20s (when the ambient light is lower than
15LUX).Stay off at the daytime(only sensing motion in darkness).
3.Dual head support 135°up to down,180°side to side pivot adjustable.
4.Install batteries with polarity in correct position and use only brand new set of 4*D-cell alkaline batteries with 1.5V.
Do not mix old and new batteries which may cause the light to malfunction.
5.Light may activate when batteries are inserted. If not, simply take light to a dark room, allow batteries to settle,then
test activation.
6.If your light will not turn off, it means it is time to replace the batteries.
7.To prolong battery life，we set the light with 480 Lumen that output decent brightness,if you want to get more
lumens or have other problem on product,please contact us through e-mail as follow：
support@byamazon.net
What is included per light:
4 screws and 4 anchors
What you need to install:
1screwdriver(phillips)
1screwdriver(flathead)
1drill(1/4”drill bit)
4 D-cell alkaline batteries
Lumen:480
Motion sensing Range :30ft
Lighting Caverage : 800 sq.ft
Auto Shut Off : 20 seconds
BATTERY AND LIGHT INSTALLATION
2.Correctly set up the"+" and
"_" poles of batteries in
groove (Batteries not
included)
1.Use a flat head
screwdriver to remove
mounting plate
3.Caution:Align the
arrows make sure the
batterylid installed
correctly "to
6.Line up the light with the
mounting plate and slide the
light into grooves
4.Twist the screws in tightly
with a flat head screwdriver to
activate the weatherproof seal
5.Mark the fixed position
and fix the mounting plate
on the wall
/
