THANK YOU
USE AND CARE GUIDE
Model #67550-0101
67550-0108D2
We appreciate the trust and condence you have placed in Schön through the purchase of this kitchen faucet.
We strive to continually create quality products designed to enhance your home. Visit us online to see our full
line of products available for your home improvement needs. Thank you for choosing Schön!
PULL-DOWN KITCHEN FAUCET
No-Tools Easy Installation System
Easy install mounting nuts
for deck plate:
Push up and hand-turn to
tighten
Easy install shank:
Push up and hand-turn to
tighten
Questions, problems, missing parts?
Call
Schön Customer Service
8 a.m. - 6 p.m., EST, Monday - Friday
(800) 880-8164
www.schonsimplymodern.com
2
Table of Contents
Safety Information ....................................2
Warranty ...................................................2
Pre-Installation .........................................2
Planning Installation ..............................2
Tools Required .......................................2
3Package Contents ..................................
Installation ................................................4
Operation...................................................7
Care and Cleaning ....................................7
Service Parts
...........................................
8
Safety Information
Please read and understand this entire manual before
attempting to assemble, operate, or install the product.
CAUTION: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
Warranty
LIMITED LIFETIME WARRANTY
Pre-Installation
PLANNING INSTALLATION
Before beginning the installation of this product, ensure all parts are present. Compare parts with the Package
Contents section. If any part is missing or damaged, do not attempt to install the product.
TOOLS REQUIRED
Adjustable
wrench
Safety
goggles
SILICONE
Silicone
Schön products are manufactured with superior quality standards and workmanship and are backed by our
limited lifetime warranty. Schön products are warranted to the original consumer purchaser to be free of defects
in materials or workmanship. We will replace FREE OF CHARGE any product or part that proves to be defective.
Simply, call (800) 880-8164 to receive the replacement item. Proof of purchase (original sales receipt) from the
original consumer purchaser must be made available for all Schön warranty claims.
This warranty excludes incidental/inconsequential damages and failures due to misuse, abuse or normal wear and
tear. This warranty excludes all industrial, commercial & business usage, whose purchasers are hereby, extended
duration of warranty.
Some states and provinces do not allow the exclusion or limitation of incidental or consequential damages, so the
above limitations may not apply to you. This warranty gives you specic legal rights and you may also have other
rights that vary from state to state and province to province. Please contact (800) 880-8164 for more details.
3
Pre-Installation (continued)
PACKAGE CONTENTS
D
E
F
G
A
H
I
B
C
Part Description Quantity
A 1Faucet assembly
B 1
D Escutcheon 1
Easy install shank
E 1
F Shank 2
Base plate
H Weight clip 1
G Easy install nut 2
I Weights 1
C 1Flange
www.schonsimplymodern.com
Please contact (800) 880-8164 for further assistance.
4
Installation
CAUTION: Always turn off the water supply before
removing an existing faucet or replacing any part of a
faucet. Open the faucet handle to relieve water pressure
and ensure that the water is completely shut off.
1
Installing the faucet assembly
□ Shut off the water supply. Remove the old
faucet.
□ Before installation, ensure that the ange (C)
is placed on the bottom of the new faucet
assembly (A). Insert the faucet body through
the hole in the sink.
2
Installing the escutcheon
□ Screw the shanks (F) into the escutcheon (D)
and ensure that the base plate (E) is pressed
onto the escutcheon (D) before the escutcheon
(D) is installed over the three holes in the sink.
□ From underneath sink, secure the escutcheon
to sink with the easy install nuts (G) provided.
Push up the easy install nuts (G) to sink and
hand-turn to tighten, as shown in the Fig 1.
NOTE: If the sink is uneven, use silicone under the base
plate (E).
NOTE: This step is for escutcheon installation (optional).
If the escutcheon will not be used, install the faucet
assembly as described in step 1.
Push
up
Screw
G
Fig 1
Sink
Sink
NOTE: This step is for ange installation (optional). If the
ange will not be used, install the faucet assembly as
described in step 2.
A
C
G
E
F
D
C
□ Before installation, remove the ange (C).
5
Installation (continued)
3
Installing the faucet assembly
□ Insert the faucet assembly (A) through the hole
in the escutcheon (D).
NOTE: This step is for escutcheon installation (optional).
If the escutcheon will not be used, install the faucet
assembly as described in step 1.
4
Securing the faucet assembly
□ From underneath the sink, secure the faucet
assembly to the sink with the easy install
shank (B). Push the easy install shank (B) up over
the threads until it stops against the bottom of the
sink, then hand turn to tighten (Fig 1).
A
D
Sink
B
B
Sink
Fig 1
Push
up
Screw
B
www.schonsimplymodern.com
Please contact (800) 880-8164 for further assistance.
6
Installation (continued)
5
Attaching the quick connector
to the receiving block
□ Push the quick connector (1) rmly upward and
attach it to the receiving block (2). Pull down
moderately to ensure the connection has been
made.
□ After connecting the hose, Install the weight
clip (H) at the lowest point of the hose (3).
Slide the weights (I) over the clip.
3
H
1
2
I
Weights
here
Weights
here
6
Making the waterline
connections
□ Thread the nut (1) on supply line onto outlet of
water supply valve (2) and tighten with wrench.
Do not overtighten.
2
1
Care and Cleaning
□
□
□ Do not use abrasive cleaners when cleaning this faucet.
7
Installation (continued)
1
Flushing and checking for leaks
□ Pull the hose assembly out of the spout and
remove the spray head by unscrewing it from
the hose in a counterclockwise direction. Be
sure to hold the end of the hose down into the
sink and turn the faucet on to the warm position
where it mixes hot and cold water.
□ Flush the water lines for one minute. This ushes
away any debris that could cause damage to
internal parts. Check for leaks.
□ Re-tighten any connections if necessary, but do
not overtighten. Reinstall the spray head by hand
tightening it back onto the spray hose.
Operation
IMPORTANT: After installation is completed, turn on the
hot and cold water supplies. Check for leaks. Do not lose the
gasket (1) in the hose.
7
Remove the quick connector
□ If it is necessary to remove the quick connector
(1), squeeze the tabs (2) on the quick connector
and then pull down to disconnect.
Squeeze
2
Pull
down
1
1
1
www.schonsimplymodern.com
Please contact (800) 880-8164 for further assistance.
8
Service Parts
*Specify Finish
Part Description Part Number
1 RP38232
2 O-ring RP60071
3 Wearable ring RP70380
4 Cartridge RP20005
5 Bonnet RP70304
6 Cap RP80132*
8 Handle RP13332*
9 Set screw RP50002
11 Easy install shank
RP56096
Spray head and Hose
13 O-ring RP60002
22 Easy install nut RP56095
Part Description Part Number
12 Block RP70421
14
Quick connect
assembly
RP70479
15 O-ring RP60089
16 Weight clip RP64204
17 Weights RP70441
19 Escutcheon RP80415*
20 Base plate RP70447
21 RP70440
Shank
7 Screw RP50015
10 Rubber washer RP64200
18 Flange RP80414*
21
19
20
22
18
1
2
3
4 5
6
7
8
9
12
13
14
15
16
17
10
11
Questions, problems, missing parts?
Call
Schön Customer Service
8 a.m. - 6 p.m., EST, Monday - Friday
(800) 880-8164
www.schonsimplymodern.com
Retain this manual for future use.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
