EQD Auria EQ1688 User manual

Page is loading ...

Explanation of WARNING Symbols

The lightning flash with arrowhead symbol, within an equilateral triangle, is

intended to alert the user to the presence dangerous voltage within the

inside of the product that may be sufficient level to constitute a risk of electric

shock.

The exclamation point within an equilateral triangle is intended to alert the

user to the presence of important operating and servicing instructions.

Safety instructions

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this LCD TV near water.

6) Clean only with dry cloth. Do not use liquid, alcohol, or aerosol cleaners.

7) Do not block any ventilation openings. Install your LCD TV in a well ventilated

area.

8) Keep your LCD TV away from moisture, excessive dust and any heat sources,

such as radiators, heat registers, stoves, or any other apparatus (including

amplifiers) that produce heat.

9) Do not remove the back cover. There are no user-serviceable parts inside.

10) Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding type plug

has two blades and a third grounding prong. The third prong is provided for your

safety. If the provided plug does not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

11) Protect the power cord from being walked on or pinched particularly at plugs,

receptacles, and the point where they exit from the LCD TV.

12) Never rest objects on the power cord or place it in high traffic areas.

13) Only use attachments/accessories specified by the

manufacturer.

14) Use only with stand, tripod, bracket, or table specified by

the manufacturer, or sold with the LCD TV. When a cart is

used, use caution to avoid injury from tip-over.

15) Unplug this LCD TV during lightening storms or when

unused for long periods of time.

16) Refer all servicing to qualified service personnel--

Servicing may be required if the LCD TV has been damaged in any way, such as

power-supply cord or plug damage, liquid has been spilled or objects have fallen

into the LCD TV, the LCD TV has been exposed to rain or moisture, does not

operate normally, or has been dropped.

English

17) Do not expose your LCD TV to dripping or splashing, and do not place objects

filled with liquids on it.

18) The Shock Hazard Marking and Associated Graphical Symbol are provided on the

back panel of unit.

19) This product is only to perform the useful function of entertainment and visual

display tasks are excluded.

20) Wall or ceiling mounting: When mounting the product on a wall or ceiling, be sure

to install the product according to the method recommended by the manufacturer.

Use only the mounting hardware recommended by the manufacturer. This is a

safety feature.

21) The readily operable appliance coupler will serve as the disconnect device of this

apparatus.

22) The apparatus must be connected to a mains socket outlet with a protected

earthling connection.

23) Due to safety concerns, if the VESA mounting kit is purchased separately please

make sure the mounting kit is UL-Listed, and replaceable only by service

personnel.

WARNING: To reduce the risk of fire or electric shock, do not expose this

LCD TV to rain or moisture.

CAUTION: Any damage caused by incorrectly attempting to mount this

LCD TV is not covered under the terms of the manufacturers warranty.

English

Content

ACCESSORIES.................................................................................................................1

INSTALLING THE STAND .................................................................................................1

WALL-MOUNT INSTRUCTION .........................................................................................2

FRONT PANEL BUTTONS ................................................................................................3

BACK PANEL BUTTONS...................................................................................................4

REMOTE CONTROL.........................................................................................................5

INSTALLATION..................................................................................................................7

Connecting RF antenna and Cable TV .......................................................................7

Connecting to DVD / Set Top Box...............................................................................7

Connecting to the Headphone ....................................................................................9

Connecting to a Computer..........................................................................................9

Connecting with the power cord ...............................................................................10

BASIC OPERATION ........................................................................................................ 11

Turning on the LCD TV............................................................................................. 11

Power On/Off............................................................................................................ 11

Select input source ................................................................................................... 11

Volume Adjusting ...................................................................................................... 11

INFO......................................................................................................................... 11

Electronic Program Guide (EPG)..............................................................................12

Channel Select .........................................................................................................12

List............................................................................................................................12

Favorite Channels.....................................................................................................13

Sleep Time Setting....................................................................................................13

Zoom ........................................................................................................................13

MTS Selecting ..........................................................................................................13

C.C Mode .................................................................................................................13

Using the OSD function ............................................................................................13

ADVANCED OPERATION—OSD MENU ........................................................................14

PICTURE Menu........................................................................................................14

AUDIO Menu ............................................................................................................15

TIME Menu ...............................................................................................................16

OPTION Menu..........................................................................................................17

LOCK Menu..............................................................................................................19

CHANNEL Menu.......................................................................................................23

TECHNICAL SPECIFICATION ........................................................................................26

SAFETY PRECAUTIONS ................................................................................................27

CARE AND MAINTENANCE ...........................................................................................28

TROUBLESHOOTING.....................................................................................................28

English

1

ACCESSORIES

Thank you for purchasing this LCD-TV.

This LCD-TV package comes with:

 LCD TV

 Quick Start Guide

 Remote control

 Battery AA x 2

 Power Cord

 RCA A/V Cable

INSTALLING THE STAND

1. Place the TV face down on a soft cloth or cushion on a table.

2. Install the stand base to the TV.

English

2

WALL-MOUNT INSTRUCTION

Preparing To Install The Optional Wall Mount Arm (not included)

This TV can be attached to a wall mounting arm you can purchase separately.

Turn the power OFF then disconnect the cables from the TV before performing the procedure

below.

1. Place the TV face down on a soft cloth or cushion on a table.

2. Remove the base.

3. Remove the 4 screws holding the stand to the hinge.

4. Remove the stand.

Attaching The Optional Wall Mount Arm (not supplied)

Follow these steps to finish installing the wall mounting arm:

1. Place the wall mounting arm onto the back of the TV. Line up the holes of the arm with the

holes in the back of the monitor.

2. Insert the 4 screws into the holes and tighten.

3. Reconnect the cables. Refer to the user’s manual that came with the optional wall mounting

arm for instructions on attaching it to the wall.

NOTE

 100 x 100mm VESA high hole (n=4), M4, pitch =0.7 mm screw mounting kit not included.

 Due to safety concerns, if the VESA mounting kit is purchased separately please make sure the

mounting kit is UL-Listed, and replaceable only by service personnel.

English

3

FRONT PANEL BUTTONS

 Volume Down

 Volume Up

 On Screen Display Menu On/Off

 Power ON/OFF button

 CH Down

 CH Up

 Input Source Selection (Enter)

 Power LED Indicator/ Remote Control Receiver

       

English

4

BACK PANEL BUTTONS

A

B C D E F G H I J

A Power (AC input)

B HDMI Input Terminal

C VGA signal input

D Composite Video input

E YPbPr signal input

F S-Video input

G AV/ S-Video/ YPbPr/ DVI signal Audio input (left/right)

H PC Audio input

I Cable/ Air TV input

J Headphone Jack

English

5

REMOTE CONTROL

English

6

Remote control button function as follows:

1 INPUT Input source select

2 ENTER Conﬁrm selection or enter selected menu

3 TV Direct to TV source

4 - VOL + Adjust volume UP/DOWN

5 LIST Select channel from program list

6 GUIDE Select electronic program guide (EPG)

7 0~9, - number Directly channel select

8 POWER Power ON/OFF

9 UP/ DOWN/ LEFT/

RIGHT

Move the cursor In OSD menu: UP/ DOWN for OSD function

select and LEFT/ RIGHT for function adjust

10 MENU On Screen Display (OSD) menu ON/OFF

11 ▼ CH ▲

Adjust channel UP/DOWN

12 FAV Select from preset Favorite Channels

13 ZOOM Adjust window size

14 MUTE Volume mute ON/OFF

15 INFO Display current information

16 SLEEP Set timer to turn off TV

17 MTS Select Mono, Stereo or SAP sound

18 C.C

Select caption mode

19 LAST

Return to previous channel

English

7

INSTALLATION

Connecting RF antenna and Cable TV

Make sure the power is OFF before installing your LCD TV.

1) AIR TV: Connect the LCD TV to TV antenna with 75-ohm coaxial cable. Preset the air TV

channels into memory with Auto Scan function when using an antenna TV system. This air

input jack both support TV and DTV systems. Besides, the TV system (NTSC) and DTV

system (ATSC) can be found by the scanning of “AIR” with Auto Scan function. See page 23.

2) Cable TV: Connect the LCD TV to the cable with CATV and Digital cable. Preset the cable TV

channels into memory with Auto Scan function when using a cable TV system. The cable

input jack both support CATV and Digital cable systems. Besides, the CATV system (cable TV)

and Digital cable system (clear QAM) can be found by the scanning of “Cable” with Auto Scan

function. See page 23.

Note: Users can select either Air or Cable TV cable to be connected to the TV IN jack. To

watch both of them, use an adapter to connect both Air and Cable cables to the jack.

Connecting to DVD / Set Top Box

Connect Video/Audio cables from compatible devices into the back panel of LCD TV.

1) With AV cable:

RF Cable, CATV/ Digital cable

or Adapter (not supplied)

VCD or DVD Player

RCA A/V Cable

English

8

2) With S-Video cable:

3) With YPbPr cable:

4) With HDMI cable:

VCD or DVD Player

A

udio Cable (not supplied)

VCD or DVD Player

A

udio Cable (not supplied)

HDMI Cable (not supplied)

S-Video Cable (not supplied)

YPbPr Cable (not supplied)

VCD or DVD Player

(DVD Player should have

the HDMI output terminal)

English

9

Connecting to the Headphone

Connect the headphone to the headphone output terminal of the LCD TV. (Headphone sold

separately).

Connecting to a Computer

1) With VGA Cable:

Connect the VGA cable from VGA output of the computer to the VGA terminal input of your

LCD TV. Also, connect the Audio In cable (green) from the audio output of your computer to the

audio input terminal (green) of the LCD TV.

2) With HDMI-DVI Cable:

Connect the HDMI-DVI cable from the DVI output of the computer to the HDMI terminal input

of the LCD TV. Also, connect the green end of the Audio In cable from the audio output of your

computer to the audio input terminal (red/white) of the LCD TV.

Headphone

(not supplied)

VGA 15 Pin Cable (not supplied)

PC

PC Audio In Cable (not supplied)

HDMI-DVI Cable (not supplied)

PC

Audio In Cable (not supplied)

English

10

Connecting with the power cord

Connect the power cord to the AC inlet on the back of your LCD TV, after all connections have

been completed, and plug the other end of the power cord into a correctly grounded electrical

outlet.

A

C power socket

Power Cord

English

11

BASIC OPERATION

To operate your LCD TV, you may use the TV remote control or bottom panel buttons to select

input source, change channels, or adjust volume.

Turning on the LCD TV

Before using the LCD TV:

1. Connect external equipment properly.

2. Insert the power plug and the power LED indicator will light orange.

Power On/Off

To turn the LCD TV on/off :

Press the POWER button under the LCD TV, or press the POWER button on your remote control

to turn on/off the TV. The power LED indicator lights blue when the LCD TV is on.

Select input source

To select the required input source:

Press the INPUT button on the remote control, Use ▲▼ to select the required input source

between TV, AV, S-Video, YPbPr, HDMI, and PC.

To confirm the selection, press ENTER.

Volume Adjusting

Press – VOL + to adjust volume.

To turn off the volume, press MUTE.

If you want to restore volume, press MUTE again, or press – VOL + directly.

INFO

To display the current information of the LCD TV: Press INFO, and the current state will be displayed

on the screen. (It shows all or some of the information about Input, Channel, Resolution, Audio Type,

etc., depending on what input source it is in.)

* The picture here shows an example of the INFO screen in a DTV source.

English

12

Electronic Program Guide (EPG)

Press the GUIDE button on the remote control and the program information for the channel you

are watching will be displayed on the screen.

* The picture here shows an example of the GUIDE screen in a DTV source.

Channel Select

Press number key or ▼CH▲ button to select your desired channel.

1. ATV

The “-” button has no function in ATV mode. Directly press the number buttons to select

channels.

2. DTV

Use“-＂button to select the sub channel in DTV.

Ex: Your desired number is 80-3.

Press 8 → press 0 → press“-＂→ press 3.

• Whether in ATV or DTV, after you input the channel numbers, press ENTER button to direct

to the channel immediately, or wait for 3 seconds to change automatically.

• Return to the previous channel, press LAST button.

List

Press LIST button and there will be a small window showing program list, you can scroll through

the list to select the channel you want directly without using the ▼CH▲ button.

English

13

Favorite Channels

Press FAV button to show Favorite List and select your favorite channels that have already been

stored. (You need to preset the favorite channels from the OSD menu to enable this function.)

Sleep Time Setting

Repeatedly press SLEEP button to set the off timer. The function is used to automatically shut off

the LCD TV after a preset period of time passed. There are several times for choice – Off, 5min,

10min, 15min, 30min, 45min, 60min, 90min, 120min, 180min, 240min.

Zoom

Press ZOOM button repeatedly to select the screen size. You can select from Full, 4:3, Movie

Scale, and Zoom In.

MTS Selecting

Press MTS button to choose the available sound output that is preset by TV broadcasting station.

C.C Mode

Press C.C button to select the caption mode.

Using the OSD function

You can use the OSD menus and options to adjust various settings by using the remote control.

The basic operation is as following:

 Press MENU to display OSD menu.

 Press ◄► to select your desired top Menu, and press ENTER or ▼ to enter the menu you

select.

 Use ▲▼ to select the control you want to adjust.

 When selecting the control with ►, press ► to enter next level menu or enable the function.

 Press ◄► to adjust or select the settings.

 Press MENU to exit from the OSD menu.

English

14

ADVANCED OPERATION—OSD MENU

PICTURE Menu

—To adjust the picture quality

In TV, AV, S-Video, YPbPr, HDMI source:

Note: The CHANNEL Menu icon on the screen will disappear in AV, S-Video, YPbPr, and HDMI

sources.

In PC source:

 Picture Mode: To select picture mode between Standard, Dynamic, Soft, and Personal.

 Contrast: To adjust contrast of video. (right: Max, left: Min.)

 Brightness: To adjust luminance of video. (right: Max, left: Min.)

 Sharpness: To adjust picture sharpness. (right: sharper, left: softer.)

 Tint: To adjust tint level.

 Color: To adjust color. (right: brilliant color, left: pale color.)

 Color Mode: To select color mode from Normal, Warm, or Cool.

English

15

 Zoom Mode: To select image size from Full, 4:3, Movie Scale, or Zoom In.

 NR: To select noise restriction function from Standard, Strong, Auto, Off, or Weak.

 Advanced: To adjust advanced PC functions, press ► to enter. (only appear in PC source)

 Auto: To auto adjust picture’s horizontal position, vertical position, fine tune and H-Size.

 H-Pos: To adjust the horizontal position of the picture.

 V-Pos: To adjust the vertical position of the picture.

 Clock: To adjust clock frequency in order to get optimized horizontal size.

 Phase: To adjust delay time of phase in order to reduce the noise of picture.

AUDIO Menu

—To set the audio quality and status

In DTV source: In ATV source:

English

16

In AV, S-Video, YPbPr, HDMI, PC source:

 Sound Mode: To select sound mode between Standard, Music, Movie, Sports, and Personal.

 Treble/Bass: To adjust the treble, bass or balance.

 Prefer Language: To select the available audio languages. (only enabled in DTV mode)

 MTS: Press ◄► to select the audio language from STEREO, Mono or SAP. (only appears in

ATV source)

 Surround Sound: To enjoy a concert hall effect, select “On” when stereo is playing.

 Audio Only: To turn off the screen picture but keep the sound on. (it is disabled in some

sources)

TIME Menu

—To set up time zone

Note: The CHANNEL Menu icon on the screen will disappear in AV, S-Video, YPbPr, HDMI, and

PC sources.

 Sleep Timer: Off, 5min, 10min, 15min, 30min, 45min, 60min, 90min, 120min, 180min, 240min.

 Time Zone: To select the correct Time Zone for your area.

 DST: To turn on/off summer Daylight Saving Time.

 Time Format: To select time format from 12-hour or 24-hour.

 Auto Sync: To enable automatic synchronization of time.

English

17

 Clock: To adjust the current time. Press ► to enter. Use ◄► to move between Year, Month,

Date, Hour, Minute, and use ▲▼ to adjust. Select OK and press ENTER to save the setting.

OPTION Menu

—To set up OSD window

In TV, AV, S-Video source:

Note: The CHANNEL Menu icon on the screen will disappear in AV and S-Video sources.

In YPbPr, HDMI, PC source:

 Menu Language: To select an OSD language from English, French or Spanish.

 Transparency: To change the transparency of OSD window. (0%, 25%, 50%, 75%, 100%)

 OSD Time Out: To setup the display time of OSD. (5, 15, 30, 45, and 60 seconds)

 Closed Caption: To set close caption options.

English

Page is loading ...

EQD Auria EQ1688 User manual

This manual is also suitable for

EQD Auria EQ1688 User manual

in other languages

Related papers

Other documents